Peak SML-2500 Manuale
SINGLE POST LIFT
Model:SML-2500
CONTENTS
I. PRODUCT FEATURES AND SPECIFICATIONS............................................................................................. 1
II. INSTALLATION REQUIREMENT.......................................................................................................................3
III. STEPS OF INSTALLATION...............................................................................................................................4
ⅣEXPLOEDED VIEW............................................................................................................................................. 20
V. TEST RUN..............................................................................................................................................................23
VI. OPERATION INSTRUCTIONS....................................................................................................................... 25
VII.MAINTENANCE SCHEDULE.......................................................................................................................... 26
VIII. TROUBLE SHOOTING..................................................................................................................................27
IX. PARTS LIST FOR SML-2500......................................................................................................................... 28
1
I. PRODUCT FEATURES AND SPECIFICATIONS
MOBILE CHAIN-DRIVE SINGLE POST MODEL SML-2500 FEATURES
· Compact design.
· Hydraulic cylinders, designed and made on ANSI standard, utilizing NOK oil seal in
cylinder.
· Self-lubricating UHMW Polyethylene sliders and bronze bush.
· Single-point safety release, and dual safety design.
· Super-symmetric arms design with 3-stages front arms and 2-stages rear arms.
· Stackable and screwed type rubber pad.
MODEL SML-2500 SPECIFICATIONS
Model
Style
Lifting
Capacity
Lifting
Time
Lifting
Height
Overall
Height
Overall
Width
Minimum
Pad
Height
Motor
SML-2500
Chain-drived
2500kgs
6,000 lbs
32S
1825-1960
mm
2766mm
2032mm
106mm
2.0/3.0HP
Fig.1
2
Arm Swings View
Fig.2
3
II. INSTALLATION REQUIREMENT
A.TOOLS REQUIRED
Screw sets
Level Bar
Tape Measure(7.5mm)
English Spanner(12″)
Pliers
Wrench set：(10＃、13＃、14＃、12＃Socket Head Wrench：(4＃、5＃、6＃)
17＃、19#、24＃、30＃)
Pliers
B.POWER SUPPLY
The electrical source must be 2.2KW minimum. The source cable size must be 2.5mm²
and in good condition of contacting with floor.
Fig.3
4
III. STEPS OF INSTALLATION
A. Location of installation
Check and insure the installation location (concrete, layout, space size etc.) is suitable
for lift installation.
B. Check the parts before assembly
1. Packaged lift and hydraulic power unit (See Fig. 4)
Fig.4
Base
Carriage
Column
Power unit
5
2. Take off the packaging on the machine Take off the packing rack.
3. Move aside the parts and check the parts according to the shipment parts list(See Fig.5
& 6)
4. Check the parts of the parts bag according to the parts bag list (See Fig. 7)
Fig.7
87
Fig.5
Fig.6
6
C. Lay the base flat to the ground, confirm installation place according to the
ground state, the main purpose is to save space. (See Fig.8)
D. Install column and lift platform
1.Lay the column flat to the ground.(See Fig.9)
2.Connecting oil hose of cylinder. (See Fig.10)
Fig.8
Fig.10
Pull open the carriage
about 200mm
Fig.9
2
1
Connecting oil hose to
the fitting of cylinder
7
3.Fix column to the base plate. (See Fig.11)
4.Fix lifting platform to carriage.(See Fig.12)
Fig.11
8
7
7
Fi
Fig.12
5
6
9
7
6
8
4
3
8
E. Install motor fixed plate, power unit and oil hose(See Fig.13)
Note: Tighten the oil hose fitting and power unit fitting to avoid oil leakage; Pay
attention to the direction of power unit fitting.
Fig.13
Tighter the screw with 19#
wrench set after installing
power unit fitting.
13
12
11
10
16
15
14
200
17
Indice
Altri manuali Peak Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
