Perixx PERICAM-902 Manuale utente

IP Surveillance Camera

Wireless Pan & Tilt Remote Control /Night Vision

User’s Guide

Wireless Pan & Tilt

FCC ID: RUJ-LR802UWG

PERICAM-902

TABLE OF CONTENTS

1. OVERVIEW

1.1 PRODUCT DESCRIPTION.......................................................................................................2

1.2 PRODUCT FEATURE..............................................................................................................2

1.3 PRODUCT SPECIFICATION.....................................................................................................2

1.4 PRODUCT ACCESSORIES INCLUDE .......................................................................................3

1.5 SYSTEM REQUIREMENT .......................................................................................................3

1.6 EXTERIOR FUNCTION INTRODUCE .......................................................................................4

1.7 PRODUCT SET-UP..................................................................................................................4

2. UTILITIES AND TOOLS

2.1 IPCamFinder...................................................................................................................5

2.2 USE IP-CAM AND TEST THE IMAGE FUNCTION FOR THE FIRST TIME.....................................5

2.3 HOW TO SET UP IP CAM......................................................................................................6

2.4 SETTING THE WAY TO OBTAIN THE IP ADDRESS OF IP-CAM.................................................7

2.5 IP-CAM NETWORK FRAMEWORK INSTALLATION................................................................12

2.6 INSTALLATION FOR IP SHARE.............................................................................................19

2.7 INSTALLATION FOR WIRELESS IP SHARE.............................................................................21

3. GETTING STARTED

3.1 SYSTEM LOGIN...................................................................................................................24

3.2 LIVEVIEW ..........................................................................................................................25

3.3 TAKE A SHOT......................................................................................................................26

4. ADVANCED FUNCTION WITH LIVEVIEW.........................................................................................27

5. ADVANCED APPLICATION

5.1 IMAGE CONTROL ..............................................................................................................28

5.2 LAN SETUP.........................................................................................................................30

5.3 WLAN SETUP......................................................................................................................31

5.4 NETWORK STATUS.............................................................................................................32

5.5 SYSTEM LOG......................................................................................................................33

5.6 ADMIN SETUP.....................................................................................................................33

5.7 PPPOE – PPPOE..................................................................................................................35

5.8 DYNAMIC DNS – DYNAMIC DNS........................................................................................36

5.9 FTP – FTP SERVICE..............................................................................................................37

5.10 E-MAIL ..............................................................................................................................38

5.11 NTP – NTP...........................................................................................................................39

5.12 ACCOUNT MANAGER.........................................................................................................40

5.13 UPNP ................................................................................................................................41

APPENDIX

APPENDIX A. OPERATION EXAMPLE FOR USING A PPPOE DIAL-UP CONNECTION AND

DDNS……………....................................................................................................43

APPENDIX B. FAQ.........................................................................................................................47

OVERVIEW

1.1PRODUCT DESCRIPTION

This product is the most simple and efficient IP Camera product for remote monitoring/

administrating. The installation is very easy. With the build-in Web server, you can use web page

browser (e.g., Microsoft IE) and input the IP-Cam camera's IP address to execute remote image

monitoring and administration through either local or broadband network directly any time any

place. You can also remotely control the motor in the camera to change the monitor direction/

angle to quickly grasp the real-time image of the monitored location. Wireless transmission

capability is also provided for setting up through wireless network and avoiding damages to the

environment from the wiring.

In addition, many network protocols are supported, such as PPPoE, DHCP, STATIC IP, DDNS,

SMTP, FTP, and NTP. Moreover, IR LED lightening illumination is also included to strengthen the

night vision capability. The further recording and real-time photographing capabilities can reach

professional security and have great fun for the family use remote monitoring.

1.2 PRODUCT FEATURE

- Use standard Web Browser IE to monitor, record, and shoot remotely

- Maximum 640x480 Full screen

- Allow to view images from multi-cameras

- Allow on-line image viewing remotely for multi-users simultaneously

- Remote real-time recoding to the device and trigger to sending images to FTP & E-Mail & PC

- Support virtual IP and port switch in IP share

- Support several communication protocols, TCP/IP, DHCP, SMTP, FTP, PPPoE, DDNS,

- Use functional authority setting, name registration and password protection

- Support the dynamic IP network function of DHCP

- Support ADSL network of PPPoE user

- Standard RJ-45 network connector, support 10/100 BaseT network transmission

- Standard wireless IEEE 802.11 b/g or higher network transmission

1.3 PRODUCT SPECIFICATION

- Image Size: 176x144、320x240、640x480 adjustable

- Image Speed / Quality: Fast、Normal、slow adjustable

- Video Frequency: 50 Hz for PAL、60 Hz for NTSC

- Image Compression Format : M-JPEG

- Focal Distance Range : From 30mm to infinity adjustable

- Image Recording: Images sent to user defined path on PC

- Image capture: Images sent to FTP & E-Mail & PC

- Support TCP/IP、SMTP、FTP、PPPoE、DHCP Protocol

- Network DHCP or manual setting network IP, and support ADSL network of PPPoE user

- Build-in web server and the functions of Active-X

- Remote single picture captured with JPG file format, remote continuous screen recorded with

AVI format

- Night vision lightening illumination: Auto and Manual selection, IR LED x 6/ 5φ/850λ

- Monitoring angle: Vertical angle: Up/Down Tilt +180 to -35 degrees

Horizontal angle: Left / Right Pan +/- 175 degrees

- Standard RJ-45 network connector, support 10/100 BaseT network transmission

- Standard wireless IEEE 802.11 b/g or higher network transmission

- 5V/ 1.5A exterior switching power adaptor

- Power Consumption : 1100mA(max) / 5.5W(max)

- Operating environment : 5˚C~40˚C

- Storage temperture : -0˚C~55˚C

- Humidity : 5%~85%

1.4 PRODUCT ACCESSORIES INCLUDE

1. IP-Camera

2. Power adaptor, 5V/ 1.5A Switching Power adaptor

3. Ethernet Cable(red), used to connect to the network card of PC for testing and configuring the

product

4. Ethernet Cable (blue), used to connect to Hub, ADSL modem, IP Share

5. Setup CD

6. This User's Guide

7. Accessory for hanging and fastening

1.5 SYSTEM REQUIREMENT

PC:

- Processor: Intel Pentium 4® 1.4GHz or above is recommended

- RAM: 256MB or above

- Operation System: Windows 2000® or Windows XP®

- Hard Disk: Minimum 100MB or above

- Read only CD-ROM (for IPCamFinder installation)

Network:

- Network Card: 10/100 baseT/TX Fast Ethernet

- Wireless Network : I EEE 802.11 b/g or higher

- Network Setup: Accessing Internet normally

- Web Browser: ActiveX Enabled and Compliant (Microsoft Internet Explorer 6.0 or above)

- Connect Network Equipment: ADSL modem, Wireless IP Share or Hub

1.6 EXTERIOR FUNCTION INTRODUCE

※ Usage of Reset Switch:

During system normal operation, press and hold the Reset Switch for a short time (approximately

8 seconds) until the front Status Light goes out, the system will restart and return to the factory

default settings.

※ Power On description:

After inserting the included 5V/ 1.5A Switching Power adaptor into power outlet, you have to

wait for 40 seconds of power on time for IP Cam to confirm its software/hardware are normal.

The Status Light will light up and execute the motor homing action once power is on.

1.7 PRODUCT SET-UP

IR LED X 6 Focus

Adjustable

Status Light

DC JACK

Antenna

RJ-45 JACK

Anchor

Frame

P head M3.5X25

Reset Switch

Screw

2.1 IPCamFinder

IPCamFinder is the IP search application provided by this product. It can search all the IP

CAMs connected in LAN. Through sending out the inquiry of broadcasting packets and

receiving responses from IP CAMs, the window will display a list of all IP CAMs in the network.

Furthermore, it also provides modify functions for changing specified IP CAM's network settings,

e.g. IP Address change function.

IPCamFinder tools in detail (1):

2.2 USE IP-CAM AND TEST THE IMAGE FUNCTION FOR THE FIRST TIME

The following connection is suitable for IP-CAM test/fixed IP address change/program code

update (strongly recommended).

The operation steps are listed below:

A. Installing the Product for the first time:

- Your computer must be equipped with network card and RJ-45 network connector.

- Connect the RJ-45 terminator on the rear of IP-CAM with the red test network cable. One end

is connected to the network card of computer; the other end is connected to the rear side of

the IP-CAM.

- Connect the power adaptor to the power port (on the rear) of IP-CAM. Now, the status LED

on the front of IP-CAM will light up.

UTILITIES AND TOOLS

IP CAM

List

MAC address

Display PC's

Ethernet network

card

Renew List

Choose the way

to get IP

Wireless mode

setting

Show IP

CAM

Renew

executed to

obtain an IP

NOTEBOOK IP CAM

Figure 1

IP address

Subnet Mask

Default

Gateway

PPPoE Setting

B. Check if the IP addresses for PC network and IPCamFinder are on the same network section:

- Usually, static IP address will be used to access into Internet, so the IP address will vary. When

you want to change IP address, please write down the original IP address on your computer

first. Then you have to modify the IP address

of your computer for testing if the IP-CAM

can be operated normally . After finishing the

test, IP address for your computer should be

recovered to original settings.

- In general, the IP address for your computer

in LAN will be set with "Auto Obtain IP

address". To test if the IP-CAM is normal ,

the IP address of your computer must be

changed temporarily. After finishing the test,

it can be recovered to original settings.

C. Next, choose Control Panel->Network

Connections->choose the activated area

Network Connections---> right click of

your mouse --->select Properties(P)--->

Select Internet Protocol (TCP/IP)---> Select

Properties(R) , then you can check the

current IP address status for the computer.

The way to modify IP address is:

D. Open and execute IPCamFinder (as shown in Figure 2). The system will automatically scan the

IP-CAM that you just installed . Then, you will find 00:15:0F:00:00:22 192.168.1.100 in the

column of IP Cam List. Click 00:15:0F:00:00:22 192.168.1.100 with left mouse button. You

can see the default settings for IP-CAM.

Step 1.

Select your PC’s Ethernet network

card.

Step 2.

Click Find IP Cam with left

mouse button, you with will see

00:15:0F:00:00:22 192.168.1.100

Step 3.

Click 00:15:0F:00:00:22 with left

mouse button once, you will see

following information

IP Address: 192.168.1.100

Net Mask : 255.255.255.0

GateWay : 192.168.1.1

Step 4.

Click Show IP Cam with left mouse

button once which will start the

Browser automatically. Login using

Username/Password into network

monitor screen (refer to 3.1 for

details). If you can see the image

screen, the IP-CAM is ready to use.

Figure 2

1. 2.

Step 1.

Select your PC’s Ethernet

network card.

Step 2.

Click Find IP Cam with left

mouse button, you will see

00:15:0F:00:00:22

192.168.1.100 ….

Step 3.

Click 00:15:0F:00:00:22 with

left mouse button once, you

will see following information

IP Address: 192.168.1.100

Net Mask: 255.255.255.0

GateWay: 192.168.1.1

2.3 HOW TO SET UP IP CAM

Before you set up IP CAM, you have to know the network environment and if the IP address

is fixed or float that provided by your ISP. If you do not know, please contact with your ISP.

Section 2.5 will list the common network structure (1 ~ 7 types). Users can refer to the structure

to find out what type is suitable for your computer and finish the setting up according to the

instructions. To set up IP-CAM and IP address, the common way that people use is to change the

obtaining of IP address of IP-CAM. Detailed information is listed as 2.4-1 ~ 2.4.3.

2.4 SETTING THE WAY TO OBTAIN THE IP ADDRESS OF IP-CAM

2.4-1 STATIC - IP Address Setting

- Your computer must be equipped with network card and RJ-45 network connector.

- Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable. One end is

connected to the network card of computer; the other end is connected to the rear side of the

IP-CAM.

- Connect the power adaptor to the power port (on the rear) of IP-CAM. Now, the status LED on

the front of IP-CAM will light up.

- Open and execute IPCamFinder (as shown in Figure 3),The system will automatically scan the IP-

CAM that you just installed . Then, you will find 00:15:0F:00:00:22 192.168.1.100 in the

column of IP Cam List. Click 00:15:0F:00:00:22 192.168.1.100 with left mouse button. You can

see the default settings for IP-CAM.

- Fill in Fixed IP Address as below. (If you do not know your fixed IP address, please contact with

your ISP. Below is an example of Fixed IP Address modification.)

1. 2.

NOTEBOOK IP CAM

Figure 3

Step 4.

Default connection mode selection is

Manual, i.e. STATIC.

Step 5.

Type in Fixed IP.

IP Address : 211.78.174.94

Net Mask: 255.255.255.248

GateWay : 211.78.174.89

Step 6.

HTTP Port:Http communication port.

The default setting is 80.

(If you have multiple IP-CAMs

installed in the same network, you

have to divide them with different

Port numbers, e.g, 1025、1026、

1039…..)

Step 7.

After finishing the settings, click

Setting to send. The network settings

for this IP-CAM are renewed.

6. 7.

Figure 3

Example:

1. Set up the IP CAM with

fixed IP address.

2. Turn on your computer

and open IE browser.

Type 211.78.174.94:(

1025、1026、1039....)

in the Address line.

Now you can access

into the monitoring

screen of network.

2.4-2 DHCP - IP Address Setting:

- Use RJ-45 Ethernet cable (red) to connect ADSL

host and switching hub. Then use RJ-45

Ethernet cable (blue) to connect PC and IP CAM

(as shown below). ADSL/

CABLE MODEM

LAN HUB

IP CAM

NOTEBOOK

Altri manuali per PERICAM-902

Indice

Altri manuali perixx Telecamera IP

perixx

perixx PERICAM-902 Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente