G
OPT
A
STEP 2A Fasten the post assemblies to the bases (for regular
lower height)
STEP 2B Fasten the post extensions and post assemblies to the
bases (for extra higher height)
- 3 - - 4 -
- 5 - - 6 -
01
03
01
02
The plastic packaging bag of the posts and bases come with yellow and blue
labels. ONLY assemble the posts and base labelled THE SAME COLOR.
Otherwise it will be difficult to assemble.
STEP 2B-1 Secure the post assem-
blies [03] to the post extensions [02]
STEP 2B-2 Fasten the post exten-
sions [02] and post assemblies [03]
to bases [01]
03
04
02
Loosen
Lift
Tighten
STEP 3 Adjust post assemblies to the desired height
STEP 4 Secure speaker to stand
Speaker option A: two thread inserts
Note: The washers
[K] are only suitable
for bolts [J] and [H] (If Needed)
06
E
H
K
I
JL
G
OPT
B1
04
Speaker option B1: keyhole insert
1. Insert bolt [F] through 90 degree
plate [04]
2. Thread plastic nut [E] to bolt [F]
3. Insert bolt [F] into keyhole and
fasten the plastic nut [E]
4. Use the washer [P] to adjust the
length of the bolt [F] if necessary.
04
E
P
F
Speaker option B2: keyhole insert
G
04
K
HJ
D
OPT
C
05
05
Speaker option C: Thread holes located at
thebottom of the speaker
OPT
B2
G
(Suitable for Samsung SWA-8500S,
SWA-9000S Speakers)
O
M
①
②
04
N
K
1.Slide the washer [O] into the bolt [M], then insert
them into the keyhole.
2.Tighten the nut [N] until the washer [K] is pulled
firmly against the 90 degree plate [04].
1.Slide the washer [O] into the bolt [M], then insert
them into the keyhole.
2.Tighten the nut [N] until the washer [K] is pulled
firmly against the 90 degree plate [04].
