Philco TB100HH9 Manuale utente

Owner's Manual

TB100HH9

DTV Digital to Analog Converter

(Set Top Box)

THANK YOU FOR CHOOSING PHILCO.

NEED HELP FAST?

READ YOUR OWNER'SMANUAL FIRST FOR QUICK TIPS

THAT MAKE USING YOUR PHILCO PRODUCT MORE ENJOYABLE.

IFYOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,

YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM

OR CALL 1-800-317-6062 WHILE WITH YOUR PRODUCT.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

X6032UD_Book.indb 1X6032UD_Book.indb 1 11/28/2007 4:34:11 PM11/28/2007 4:34:11 PM

1A23

BEFORE USING

Important Safeguards

1. Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instructions

should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the pos-

sibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference

to unplugging the appliance in the cleaning description oth-

erwise required in item 5.

6. Attachments-Do not use attachments not recommended by

this product manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this product near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,

and the like.

8. Accessories-Do not place this product on an unstable cart,

stand, tripod, bracket, or table. This product may fall, caus-

ing serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with this

product. Any mounting of the appliance should follow the

manufacturer’s instructions and should use a mounting

accessory recommended by the manufacturer.

An appliance and cart combination should be

moved with care.

Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart

combination to overturn.

AMEUBLES- Cet appareil ne doit être

placé que sur un meuble (avec ou sans

roulettes) recommandé par le fabricant. Si

vous l’installez sur un meuble à roulettes,

déplacez les deux ensembles avec précau-

tion. Un arrêt brusque, l’utilisation d’une

force excessive et des surfaces irrégulières

risquent de déstabiliser l’ensemble et de le renverser.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reli-

able operation of this product and to protect it from over-

heating, and these openings must not be blocked or cov-

ered. The openings should never be blocked by placing this

product on a bed, sofa, rug, or other similar surface. This

product should never be placed near or over a radiator or

heat register. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper ven-

tilation is provided or the manufacturer’s instructions have

been adhered to.

10.Power Sources-This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your appliance dealer or local power company. For

this products intended to operate from battery power, or

other sources, refer to the operating instructions.

11.Grounding or Polarization-This product is equipped with

a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should

be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

The caution marking is located on the bottom of the cabinet.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUTING

A RISK OF ELECTRIC SHOCK IS

PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

The serial number of this product may be found on the bottom of the unit. You should record the number and other vital

information here and retain this book as a permanent record. Serial numbers are not kept on file.

Date of Purchase Dealer Phone No.

Dealer Purchase from Model No.

Dealer Address Serial No.

X6032UD_Book.indb 2X6032UD_Book.indb 2 11/28/2007 4:34:31 PM11/28/2007 4:34:31 PM

1A23

BEFORE USING

BEFORE

USING

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to this product, be sure the

antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/

NFPA No. 70, provides information with respect to proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode. (Fig. A)

14.Lightning-For added protection for this product receiver

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This

will prevent damage to this product due to lightning and

power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this product through openings as they may touch dan-

gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind on

this product.

18.Servicing-Do not attempt to service this product yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to quali-

fied service personnel.

19.Damage Requiring Service-Unplug this product from the

wall outlet and refer servicing to qualified service person-

nel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into this

product.

c. If this product has been exposed to rain or water.

d. If this product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

this product to its normal operation.

e. If this product has been dropped or damaged in any way.

f. When this product exhibits a distinct change in perform-

ance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same charac-

teristics as the original part. Unauthorized substitutions

may result in fire, electric shock, injury to persons or other

hazards.

21.Safety Check-Upon completion of any service or repairs to

this product, ask the service technician to perform routine

safety checks to determine that this product is in proper

operating condition.

22.Heat-This product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

G RO U ND CL AM P S

N E C - N A TI O N A L E L E CT RI C AL C O DE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONA L ELECT RICAL CODE

W I R E

D I SC HA R GE U NI T

( NEC S EC TI O N 8 10 - 2 0)

G RO U NDI N G C O N DU C T OR S

( NEC S ECT IO N 8 1 0 -2 1 )

E L E C T R O D E S Y S T E M

( NEC A RT 2 5 0 , P AR T H )

S E RV I CE

E Q U I PM E N T

C L A M P

A NT E NN A

L E A D I N

A NT EN NA

P OW E R S E R VI C E G R O U ND I N G

GROUN D

E L E C T RI C

FIGURE A

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

X6032UD_Book.indb 3X6032UD_Book.indb 3 11/28/2007 4:34:31 PM11/28/2007 4:34:31 PM

1A23

BEFORE USING

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

Location

For safe operation and satisfactory performance of

this product, keep the following in mind when select-

ing a place for its installation:

•Shield it from direct sunlight and keep it away

from sources of intense heat.

•Avoid dusty or humid places.

•Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

at the top and bottom of the unit. Do not place the

unit on a carpet because this will block the ventila-

tion holes.

•Install unit in a horizontal position.

•Avoid locations subject to strong vibration.

•Do not place this product near strong magnetic fields.

•Avoid moving this product to locations where tem-

perature differences are extreme.

Avoid the Hazards of Electrical

Shock and Fire

•Do not handle the power cord with wet hands.

•Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

•If by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•Do not put your fingers or objects into this product

cassette holder.

•Do not place anything directly on top of the unit.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast televi-

sion programming, video tape, film or other copy-

righted material may violate applicable copyright

laws. We assume no responsibility for the unauthor-

ized duplication, use or other acts which infringe

upon the rights of copyright owners.

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes

or modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

Precautions

X6032UD_Book.indb 4X6032UD_Book.indb 4 11/28/2007 4:34:32 PM11/28/2007 4:34:32 PM

1A23

BEFORE USING

BEFORE

USING

BEFORE USING. . . . . . . . . . . . . . . . . . 2

Important Safeguards . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 4

Information on Digital Broadcasting . . . . . 6

Major Features of STB . . . . . . . . . . . . . . . . 6

Location of Controls . . . . . . . . . . . . . . . . . . 7

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing Batteries . . . . . . . . . . . . . . . . . . . 8

CONNECTIONS . . . . . . . . . . . . . . . . . . 9

Connecting an Antenna . . . . . . . . . . . . . . . . 9

Connecting to TV . . . . . . . . . . . . . . . . . . . 10

OTHER CONNECTIONS . . . . . . . . . . . 11

STB Connection to a Standard Stereo

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting to TV and Video Devices

(VCR, DVD Recorder, etc) . . . . . . . . . . . . 12

INITIAL SETUP (SETUP WIZARD) . . . 13

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . 13

BASIC OPERATION . . . . . . . . . . . . . . . 15

Selecting Channels on the STB. . . . . . . . . 15

Channel Banner. . . . . . . . . . . . . . . . . . . . . 15

Choosing Audio Language . . . . . . . . . . . . 16

Picture Still . . . . . . . . . . . . . . . . . . . . . . . . 16

Electronic Program Guide (EPG) . . . . . . . . . . . 16

ADVANCED OPERATION . . . . . . . . . . 17

Adding/Deleting Channels . . . . . . . . . . . . 17

Adjusting Antenna. . . . . . . . . . . . . . . . . . . 18

Receiving Channels (Autoscan) . . . . . . . . 18

Selecting RF OUT Channel . . . . . . . . . . . 19

Selecting Display Mode . . . . . . . . . . . . . . 20

Setting the Time Zone and DST

(Daylight Saving Time). . . . . . . . . . . . . . . 20

V-Chip Options . . . . . . . . . . . . . . . . . . . . . 21

Closed Caption Options . . . . . . . . . . . . . . 23

Auto Power Down. . . . . . . . . . . . . . . . . . . 25

OTHERS . . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting. . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . 27

Glossary and Acronyms . . . . . . . . . . . . . . 27

GUÍA PARA RÁPIDA CONSULTA . . . . 28

Antes de utilizar . . . . . . . . . . . . . . . . . . . . 28

Conexiones . . . . . . . . . . . . . . . . . . . . . . . . 29

Ajuste inicial

(ASISTENTE DE AJUSTES). . . . . . . . . . 30

Operación avanzada . . . . . . . . . . . . . . . . . 31

Warranty . . . . . . . . . . . . . . . . . . . . . Back Cover

Table of Contents

or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai.

Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein

without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the

express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective

owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right

to use any of the trademarks displayed herein.

Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its

intellectual property rights to the fullest extent of the law.

Manufactured under license from Dolby Laboratories.

X6032UD_Book.indb 5X6032UD_Book.indb 5 11/28/2007 4:34:32 PM11/28/2007 4:34:32 PM

1A23

BEFORE USING

Information on Digital Broadcasting

Digital terrestrial antenna

Digital

terrestrial signals

ATSC

STB

(Set Top Box)

Receives ATSC

Digital broadcasting is the most advanced format of broadcasting, employing a new technology for

compression of audio and video signals which allows broadcasters to transmit digital signals using existing

terrestrial systems.

Due to this dramatic progress, new features of broadcasting service such as widescreen formats and higher

definition provide ways to experience the full benefits of digital transmission.

Digital broadcasting overcomes problems experienced with analog TV such as ghosting, “snowy” pictures and

interference. Digital TV has a dramatic effect on these problems by its very nature.

In addition, the number of channels available has dramatically increased, so that you can make the best choice

among the variety of programs anytime with a clear picture.

It is also possible to transmit multiple Standard Definition TV (SDTV*) programs within the same bandwidth.

Some data capacity can also be allocated to provide more effective closed captioning or multiple language

soundtracks.

Your current TV can be used for its entire service life.

This STB (Set Top Box) will now make this possible.

Major Features of STB

•Capable of receiving digital (ATSC*) broadcasts •Alternative languages for OSD (English, Spanish

and French)

•Capable of receiving Standard Definition TV

(SDTV*) broadcasts

•Sub-channels* through a single digital channel

ATSC - Advanced Television Systems Committee:

This group is working to establish the standards for

digital TV broadcasting and digital TV equipment

for both SDTV and HDTV.

Sub-Channel - The compression of audio and

video signals enables each digital channel to carry

different programs on sub-channels. Select them by

simply pressing [CH / ]or the number buttons

on your remote control when available.

SDTV - Standard Definition Television:

SDTV signal formats are 480p and 480i. SDTV

provides lower resolution, yet presents a very sharp,

clear picture. Lower resolution allows broadcasters to

transmit multiple programs per channel.

X6032UD_Book.indb 6X6032UD_Book.indb 6 11/28/2007 4:34:32 PM11/28/2007 4:34:32 PM

1A23

BEFORE USING

BEFORE

USING

Location of Controls

Remote Control

1 2 3

СH +

4 5 6

СH

7 8 9

. 0

ALT.CH

STANDBY-ON

DISPLAY

SETUP STILL AUDIO EPG

OKRETURN

1 STANDBY-ON button: Turns STB on and off.

2 Number buttons: Input channel numbers and passwords.

3 SETUP button: Enters or quits “SETUP” menu.

4 STILL button: Pause the image while you continue to listen to the audio.

5 Navigation buttons K/ L/ s/ B: Moves the highlight up, down,

left or right.

6 RETURN button: Returns to the previous screen in “SETUP” menu or

exits from the menu.

7 CH / buttons: Change the channels up or down.

8 ALT. CH: Returns to the channel you were last watching.

9 DISPLAY button: Displays information on the channel banner or clears

the banner.

10 EPG button: Displays or exits the Electronic Program Guide.

11 AUDIO button: Selects alternative audio languages (if available).

12 OK button: In “SETUP” menu, press to enter your selection.

•To operate this STB with a universal remote, check the instruction manual for

remote and find Philco brand STB code. If you do not find the code or the

code does not work, try to use Sylvania brand STB code instead.

Front Panel

POWER

1 2

1 Remote control sensor: Receives signals from

your remote control so you can control the STB from a

distance.

2 POWER indicator: Lights up while STB is on.

When you turn the STB on, it blinks first and then

lights up.

When you turn the STB off, it blinks first and then goes

off.

Rear Panel

AUDIO OUT

VIDEO ANT. IN

OUT ANT. ΟUΤ

1 2 3 4 5

1 AC power cord: Connect to AC outlet.

2 AUDIO OUT jacks (Right (red) / Left (white)): Connect your TV, stereo system or VCR with standard

audio cables.

3 VIDEO OUT jack (yellow): Connect your TV or VCR with a standard video cable.

4 ANT. IN jack: Connect an antenna.

5 ANT. OUT jack: Connect to the Aerial jack on your TV to output the signal.

X6032UD_Book.indb 7X6032UD_Book.indb 7 11/28/2007 4:34:32 PM11/28/2007 4:34:32 PM

1A23

BEFORE USING

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

Accessories

Check the following accessories when unpacking the

STB:

Remote control: NA382UD

Owner’s manual: 1VMN24077

2 AA batteries

RF cable: WPZ0901TM002

1 2 3

СH +

4 5 6

СH

7 8 9

ALT.CH

STANDBY-ON

DISPLAY

SETUP STILL AUDIO EPG

OKRETURN

Installing Batteries

1 Unsnap the battery cover from the back

of the remote control.

2 Install two AA batteries making sure

the polarity (+ / -) is correct.

NOTE:

•

When replacing batteries, replace them in pairs.

3 Snap the battery cover back.

CAUTION:

•Do not mix battery types (alkaline and manganese,

or old ones and new ones).

•Do not recharge, short-circuit, heat, burn or

disassemble batteries.

X6032UD_Book.indb 8X6032UD_Book.indb 8 11/28/2007 4:34:33 PM11/28/2007 4:34:33 PM

1A23

CONNECTIONS

Connecting an Antenna

Basic Connection:

AUDIO OUT

VIDEO ANT. IN

OUT ANT. ΟUΤ

Rear panel of STB

RF cable

VHF/UHF

antenna

When Connecting to Cable Box (optional) Also:

AUDIO OUT

VIDEO ANT. IN

OUT ANT. ΟUΤ

Cable box (optional)

ANT

OUT

Rear panel of STB

Incoming cable

signals

RF cable

To audio/video input

jacks of the TV

RF cable

VHF/UHF

antenna

Refer to following

pages for the

connection to TV.

RF cable

To antenna

input jack

Supplied cables used in this connection are as follows:

•RF cable x1

Please purchase the rest of the necessary cables at your local store.

Before connecting, ensure the AC power cords of all devices are NOT

connected to the AC outlets.

1Use an RF cable to connect the antenna to the ANT. IN jack on the

STB.

2Use an RF cable to connect the incoming cable to the antenna

input jack on the cable box.

3Use an RF cable to connect the antenna output jack on the cable

box to the antenna input jack on the TV.

4Refer to “Connecting to TV” on page 10 to connect your TV.

Note to the Cable TV System

Installer:

This reminder is provided to call

the Cable TV system installer’s

attention to Article 820-40 of

the National Electrical Code,

which provides guidelines for

proper grounding - in particular,

specifying that the cable ground

shall be connected to the

grounding system of the building,

as close to the point of cable entry

as possible.

NOTE:

•When you connect the RF cable to another device, be sure to use a splitter as shown below.

Splitter

e.g., VCR

STB

To RF-IN

To ANT. IN

Another device

VHF/UHF

antenna

X6032UD_Book.indb 9X6032UD_Book.indb 9 11/28/2007 4:34:33 PM11/28/2007 4:34:33 PM

1A23

CONNECTIONS

Connecting to TV

AUDIO OUT

VIDEO ANT. IN

OUT ANT. ΟUΤ

Rear panel of STB

Video cable

Audio cable

To video input jack

To audio input

jacks (L, R)

To antenna input jack

AND/OR

RF cable

Supplied cables used in this connection are as follows:

•RF cable x1

Please purchase the rest of the necessary cables at your local store.

Before connecting, ensure the AC power cords of all devices are NOT connected to the AC outlets.

1Refer to “Connecting an Antenna” on page 9 to connect the STB to an antenna.

2Use an RF cable to connect the ANT. OUT jack on the STB to the antenna input jack on the TV.

AND/OR

Use a standard audio/video cable to connect the AUDIO/VIDEO OUT jacks on the STB to the audio/video

input jacks on the TV.

3Plug all AC power cords into AC outlets, then turn all devices on.

4If you want to view the analog TV channels also, make sure a conventional VHF/UHF antenna is

connected, then proceed to “Selecting RF OUT Channel” on page 19. If you want to view the digital TV

channels, select an appropriate external input channel on your TV (ch3 or ch4) (refer to your TV’s manual

for details), and also set the STB’s output channel to the corresponding channel number (3 or 4). You can

switch between 3 and 4 by holding [SETUP] down over 3 seconds or in the “Selecting RF OUT Channel”

section on page 19.

NOTE:

•

When using either of these connections, the resolution of the video signal output will always be 480i. This

ensures that all digital TV programming, no matter what the actual transmitted format is, will be viewable

and compatible with your analog TV.

•If your TV is monaural (MONO) and has only one audio jack, connect a standard audio cable (white) from

the AUDIO OUT (white) jack on the STB to an audio input jack (white) on the TV. The red cable and jack

will not be used.

X6032UD_Book.indb 10X6032UD_Book.indb 10 11/28/2007 4:34:34 PM11/28/2007 4:34:34 PM

Altri manuali per TB100HH9

Indice

Altri manuali Philco Decoder

Philco

Philco TB100HH9 Manuale utente

Manuali Decoder popolari di altre marche

VBrick

VBrick 8000-0188 Manuale utente

Kogan

Kogan KGNPVR500VAA Manuale utente

Asus

Asus O!PLAY MEDIA PRO Manuale utente

Samsung

Samsung ICU 100 Manuale utente

VECTORMAX

VECTORMAX A12E Manuale utente

DStv

DStv Explora Manuale utente

Ace Digital TV

Ace Digital TV ADB 3800 Manuale utente

Cisco

Cisco 4398DVB Manuale utente

Polaroid

Polaroid KHA-01651B Manuale utente

Samsung

Samsung GX-SM530CF Manuale utente

BT Business Total Broadband Manuale utente

Megasat

Megasat HD 720 plus Manuale utente

Sungale

Sungale STB608 Manuale utente

Amino

Amino Amigo 7X Manuale utente

Geniatech

Geniatech ATV225 Manuale utente

Android

Android Androidminibox mx2 se Manuale utente

Hama

Hama Internet TV Box Manuale utente

Ariva

Ariva T650i Manuale utente