Philips Lightolier E3 Series Manuale utente

E3 Series

GENERAL DUTY THERMOPLASTIC EMERGENCY LIGHTING

Page 1 of 2

Job Information Type:

Job Name:

Cat. No.:

Notes:

Features

Illumination: Illumination

is accomplished with up to

three lamp heads mounted

on the top of the unit. Most

often specified is Lightolier’s

“S” series rectangular lamp

heads. The “S” series lamp

heads incorporate a high

performance parabolic

reflector with a wedge base

tungsten lamp allowing

maximum spacing between

units along a path of egress.

A complete offering of Par 36

sealed beam tungsten, halogen

or MR16 LED lamp heads are

also available.

Housing: Constructed of

impact-resistant, UL 94 V-0,

5 VA thermoplastic. Mounting

is accomplished by means of

the universal j-box mounting

pattern or the keyhole

knockouts provided on the

rear of the housing. The cover

assembly closes and remains

secure via a snap-fit design

and offers tool-free access to

the housing interior. White or

black housing and lamp head

colors are available.

Operating Temperature

Range: Standard Location:

65°F (19°C) to 85°F (30°C)

Damp Location: 32°F (0°C) to

104°F (40°C)

Non-Diagnostic

Electronics: Standard

electronics systems include

a 120/277 VAC dual tap

input transformer. Standard

electronic performance

features include AC line latch,

brownout detection, and

low-voltage battery disconnect

circuitry to maximize battery

service life.

Self-Diagnostics

Electronics: Charging system

is microprocessor driven with

software embedded diagnostic

routine and temperature

compensation. 120/277 VAC

input, surge protection,

brownout, AC lockout, and

low voltage disconnect features

are standard.

Self-Testing Diagnostics

(optional): The diagnostic/

charging platform with self-

testing mode automatically

runs a one-minute self-test

every 30 days and a 30-minute

test on the sixth and twelfth

month. A one-minute or

90-minute test may be initiated

via the push to test switch on

the unit or by activating the

appropriate test command on

the optional IR test device.

Code Compliance

UL 924 listed. NFPA 101,

NEC, BOCA, OSHA and

IBC illumination standards.

Optional UL damp location

listing available (SD2 models

only) 0°C to 40°C.

Warranty

Three year full electronics

warranty. One year full plus

four year prorated lead calcium

battery warranty. Five year full

plus five year prorated nickel

cadmium battery warranty.

E3112WS92SD2

6.84"

(17.37 cm)

13.01"

(33.05 cm)

11.87"

(30.15 cm)

14.53"

(36.91 cm)

5.0"

(12.7 cm)

E3112WPT86W2

E3 Series

GENERAL DUTY THERMOPLASTIC EMERGENCY LIGHTING

Page 2 of 2

Philips Lightolier

e: [email protected]

t: (508) 679-8131

w: www.lightolier.com

E3 Series August 9, 2012

Specifications are subject to change without notice.

Job Information Type:

Ordering Information

Series

6 V Lead Calcium

E3112 = 12 W2

E3125 = 25 W

E3136 = 36 W1

E3150 = 50 W

6 V Nickel Calcium

E31N25 = 25 W

E31N50 = 50 W

1= One Lamp

Head

2= Two Lamp

Heads

3= Three Lamp

Heads

# of Heads

6 V Tungsten

S6 = 5.4 W

S7 = 7.2 W

S9 = 9 W

12 V Tungsten

S9 = 9 W

S12 = 12.5 W

S18 = 18 W

MR16 LED Lamp Heads*

12 V LED

M7F** = 7 Watt, 35°

Lamp Heads

W= White

B= Black

Housing Color

A= Ammeter3

BD = Battery Disconnect Switch3

DL = Damp Location Listed3

EX = Special Input Transformer (specify voltage &

frequency)4

F1 = 120 VAC Input Fuse3

F2 = 277 VAC Input Fuse3

P1 = 120 VAC Power Switch3

P2 = 277 VAC Power Switch3

T= Self-Testing Diagnostics3

TA = Audible Self-Testing Diagnostics3

TD = Time Delay, 15 Minutes3

V= Voltmeter3

Factory Installed Options3

Accessories (order as a separate item)

SDREMOTE = Infrared Remote Test Device

PCS1 = Polycarbonate Vandal Shield

WG5 = Wire Guard

Note 1) Not available with DL option. 2) Only available with non-diagnostic models. 3) Only available with diagnostic electronic models. 4) Some option combinations

may impact UL listing, consult factory for specifics.

12 V Lead Calcium

E3225 = 25 W

E3236 = 36 W2

E3250 = 50 W

12 V Nickel Calcium

E32N25 = 25 W

E32N50 = 50 W

Optics Wall mounted 7.5' AFF, ‘S9’ 6 V 9 W Tungsten Lamps Represented

7.5 ft.

25 ft.

6 ft.

Average initial footcandles at floor = 1.08

Maximum initial footcandles at floor = 3.0

Minimum initial footcandles at floor = 0.3

Maximum to minimum ratio = 10.00

* The optics layout shown is intended to be used as reference only. Standard reflectances used were 80/50/20. Lightolier is not responsible for site specific conditions that

may alter the results.

0.3

0.2

1.2

1.1

0.4

2.4

2.3

0.7

2.3

1.8

0.6

1.6

1.0

0.4

0.9

0.6

0.4

0.7

0.6

0.5

0.9

0.6

0.4

1.4

0.8

0.4

2.3

1.5

0.5

2.6

2.4

0.8

1.6

1.7

0.9

0.5

0.3

0.7

0.4

2.0

1.9

0.6

2.6

2.2

0.7

2.0

1.3

0.4

1.2

0.7

0.4

0.8

0.6

0.4

0.7

0.6

0.4

1.1

0.6

0.4

1.8

1.1

0.4

2.5

2.0

0.6

2.2

0.7

0.8

0.9

0.4

0.2

0.3

0.2

Blank = Standard,

Non-Diagnostic Unit

SD2 = Diagnostic

Electronics

Model Designator

Electrical Specifications

Non-Diagnostic Models (60 Hz)

6 V Lead Calcium: 0.115 A (120 VAC), 0.050 A (277 VAC)

6 V NiCad: 0.160 A (120 VAC), 0.071 A (277 VAC)

12 V Lead Calcium: 0.126 A (120 VAC), 0.055 A (277 VAC)

12 V NiCad: 0.116 A (120 VAC), 0.051 A (277 VAC)

1 FC Average

Self-Diagnostics Models (60 Hz)

6 V Lead Calcium: 0.113 A (120 VAC), 0.055 A (277 VAC)

6 V NiCad: 0.157 A (120 VAC), 0.065 A (277 VAC)

12 V Lead Calcium: 0.331 A (120 VAC), 0.146 A (277 VAC)

12 V NiCad: 0.200 A (120 VAC), 0.094 A (277 VAC)

Blank = No

Lamp Heads

* Lamp included per UL acceptance. ** UL testing restricts using any substitutes for this lamp option.

Questo manuale è adatto per i seguenti modelli

Altri manuali Philips Apparecchio di illuminazione

Philips

Philips 17434/**/P7 Series Manuale utente

Philips

Philips 6912528PH Manuale

Philips

Philips 1050DRN_3D Manuale utente

Philips

Philips Calculite C4T4GD-MHT4R Manuale utente

Philips

Philips EvoKit 2x4 P 36L 36W 835 2 0-107 G2 Manuale utente

Philips

Philips ProSpec 26000 Manuale utente

Philips

Philips Selecon SPX series Manuale utente

Philips

Philips Selecon Aurora Manuale utente

Philips

Philips Lytespan 83B70E Manuale utente

Philips

Philips GreenUp Wellglass BY200P Series Guida utente

Philips

Philips 1001FDIC Manuale utente

Philips

Philips CWBU Manuale utente

Philips

Philips Lytespan 8202WH Manuale utente

Philips

Philips Lytecaster 1000ICV Manuale utente

Philips

Philips HF3650 Manuale utente

Philips

Philips C3 Series Manuale utente

Philips

Philips 69108-32-PU Manuale utente

Philips

Philips 24MHT45RS Manuale utente

Philips

Philips eW Burst Powercore Manuale utente

Philips

Philips C4T4W Manuale utente

Philips

Philips Lytecaster 1102P1 Manuale utente

Philips

Philips Lytespan 22MW4 Manuale utente

Philips

Philips 69101-30-PH Manuale utente

Philips

Philips IS_CCM Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente

ArtFox

ArtFox Beam 15R extreme Manuale utente