Phrozen SONIC MINI 4K Manuale utente

Indice

Altri manuali Phrozen Stampante 3D

Phrozen

Phrozen MegaCure Manuale utente

Phrozen

Phrozen SONIC MIGHTY 4K Manuale utente

Phrozen

Phrozen SONIC MIGHTY 8K Manuale utente

Phrozen

Phrozen SONIC 4K Manuale per l'uso e la cura

Phrozen

Phrozen Transform Manuale utente

Phrozen

Phrozen SONIC MINI 8K Manuale per l'uso e la cura

Phrozen

Phrozen Sonic Mini Series Manuale utente

Phrozen

Phrozen SONIC MINI 8K S Manuale di installazione e d'uso

Phrozen

Phrozen Shuffle 2019 Manuale utente

Phrozen

Phrozen Sonic Mega 8K Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente

Z- axis Calibration

Z-axis calibration is essential for every 3D printer. Run this test to make sure that the

building plate is leveled to the LCD screen. This is to ensure that models and prints

will adhere to the building plate.

SONIC MINI 4K

Step 1: Remove the Resin Vat

Make sure to remove any objects present on the machine's platform.

Step 2: Install the Building Plate

Attach the building plate knob to the printer and align it with the pins. Screw and tighten the

building plate.

*Note: Please ensure that the building plate does not shift during tightening.

Step 3: Loosen the Screws

Use the Allen wrench to loosen all 4 screws on the sides of the building plate in a

counterclockwise direction. After loosening it, double-check to see if the plate is loose and

movable.

Step 4: Pull the Building Plate down

Pull the building plate in a downward motion until the screws on the building plate have been

pulled down completely.

Step 5: Place a piece of paper on the LCD

Prepare a piece of A4 paper (roughly 0.07-0.10 mm) and lay it flat on the LCD screen. This

piece of paper will be used for leveling the building plate.

Step 6: Settings

On the touch panel, click TOOLS, then click Z CALIB on your touch panel to begin the

calibration process. Click NEXT and wait for 1-2 minutes as the building plate extends to the

LCD screen.

Step 7: Apply Pressure on the Building Plate

Once the building plate has touched down, apply pressure and press down firmly on the

sides of the building plate. Pull on the piece of paper to make sure the building plate is laying

tight against it.

Step 8: Tighten the Screws in a Cross Pattern Order

Once you have successfully adjusted the building plate, tighten all four screws on the sides

of the building plate in a clockwise direction while pressing down on the building plate with

the other hand, in a cross pattern order, e.g., top-right, lower-left, top-left, and lower-right.

Step 9: Double-Check Z-axis Calibration

Tug on all four corners of the A4 paper to check for pressure intensity. If it is tight, please

proceed onto the next step. If it isn’t, please perform the Z-axis calibration test again.

After several tries, if the paper is still loose, please perform the Z-axis Calibration test directly

on the resin vat. The FEP thickness is approximately 0.14-0.15 mm.

Step 10: Done

Click DONE on the touch panel and wait for the building plate to retract.

Once the plate has retracted, remove the A4 paper.

You are now ready to begin your 3D printing journey!