Planet SG-4800 Manuale utente
Gigabit SSL VPN Security Router
SG-4800
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Hardware Installation .................................................................................. 4
2.1 Safety Instruction ................................................................................ 4
2.2 Front panel ......................................................................................... 4
2.3 LED&Buttondenition........................................................................ 5
2.4 Placement........................................................................................... 5
2.5 Network Connection............................................................................. 6
3. BasicSystemConguration ......................................................................... 7
3.1 Web Login .......................................................................................... 7
3.2 ConguringtheWAN ........................................................................... 8
3.3 Remote Management ..........................................................................10
4. Furtherconguration..................................................................................12
3
1. Package Contents
Thank you for purchasing PLANET Gigabit Multi-Homing VPN Security Router, SG-
4800,andthisQuickInstallationGuidewillintroducehowtonishthebasicsetting
to connect the internet. Open the box of the VPN Security Router and carefully
unpackit.Theboxshouldcontainthefollowingitems:
SG-4800x1l
QuickInstallationGuidex1l
User’sManualCDx1l
PowerCordx1l
Cat5Cablex1l
19inchesBracketsx2l
BracketScrewx8l
If any of above items are damaged or missing, please contact your dealer
immediately.
4
2. Hardware Installation
The followings are instructions for setting up PLANET SG-4800. Refer to the
illustration and follow the simple steps below to quickly install your VPN Security
Router.
2.1 Safety Instruction
ThefollowingisthesafetyinstructionsforVPNSecurityRouterbeforeinstalling.
Themaximumoperatingtemperatureofthe routeris50ºC.Care must be taken
toallowsufcientaircirculation.
The connections and equipment that supply power to the router should be
capableofoperatingsafelywiththemaximumpowerrequirementsoftherouter.
In the event of a power overload, the supply circuits and supply wiring should
notbecomehazardous.
The AC power cord must plug into the right supply voltage. Make sure that the
supplied AC voltage is correct and stable. If the input AC voltage is over 10%
lowerthanthestandardmaycausetheroutertomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
2.2 Front panel
Figure 2-1 Front Panel of the SG-4800
Power Indicator:Lightsupwhenthepowerison.
DIAG Indicator:Glitterswhensystemisonself-testafterpoweronthedevice.
Ethernet Port can be set as a:
LAN Port:lTheSecurityRoutersupports8LANport.
WAN Port:lTheSecurityRoutersupports4WANports.
DMZ Port:lTheSecurityRoutersupports1DMZport.
5
2.3 LED&Buttondenition
LED Color Status Description
PWR Green Steady PowerOn
Off Off PowerOff
DIAG Amber
SteadyOn Systemiscrashed.
Blinking Systemisonself-testafterpoweronthe
device.
Off System is ready.
WAN/DMZ
LINK/ACT Green
SteadyOn Porthasbeenconnected&getsIP.
Blinking Transmit data.
Off NotgettheIPaddress,eventheporthas
been connected.
LAN
LINK/ACT Green SteadyOn LANporthasbeenconnected.
Blinking Transmit data.
LAN/
WAN/DMZ
Speed
Green SteadyOn Works on 1000Mbps.
Amber SteadyOn Works on 100Mbps.
Off Off Works on 10Mbps.
Button Action Description
Reset
Press for 5 Secs Warm Start
DIAGindicator:AmberLEDashingslowly.
PressOver10Secs Factory Default
DIAGindicator:AmberLEDashingquickly.
2.4 Placement
Makesurethedeviceisplacedinasafeenvironmenttoavoidequipmentfailure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.l
DO NOT obstruct ventilation slots on each side of the router or expose it tol
direct sunlight or other heat source. Be sure that there is adequate air ow
aroundtherouter.
Placetherouteronaatsurfacetoavoidanydamage.l
6
2.5 Network Connection
SSL VPN Tunnel
Modem
ADSL
PC SG-4800
Vendor
Headquarters Action Office
Branch Offices
Mail-ServerWeb-Server
DMZ
Access Point
Firewall GatewayFirewall Gateway
Modem
Modem
Modem
PC
PC Group
PC
PC
Laptop
Firewall Firewall
ADSL
ADSL
a/n
PPTP VPN Tunnel
IPSec VPN Tunnel
IPSec VPN Tunnel
ADSL 2/2+
ADSL
VDSL2
VDSL2
100Base-TX UTP
1000Base-T UTP
5GHz 802.11a/n
a/n
VDSL2VDSL2
Action Office
Internet
Finance-Server
Figure 2-2 Topology of the SG-4800
7
3.BasicSystemConguration
3.1 Web Login
Step 1. Connect a computer to a LAN port on the router. Your PC (DHCP client
mode) will obtain an IP address automatically. (It is usually in the
192.168.1.xrange.)
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the router: 192.168.1.1 into the URL
addressbox.
Step 4. Enterthedefaultusernameadminandthedefaultpasswordadmin.Then
clickLogintoenterWeb-baseduserinterface.
Figure 3-1 Login page of the SG-4800
DefaultLANIP:192.168.1.1
DefaultName:admin
DefaultPassword:admin
8
3.2 ConguringtheWAN
Step 1. GotoNetwork NetworkConnectiontondWAN Setting.
Figure 3-2 Network connection button
Figure 3-3 Multi-WAN interface setting page
9
Step 2. ClickEdittoenterWANcongurationpage.
Figure 3-4 WAN conguration page
There are six types of WAN connection. They are Obtain an IP automatically,
Static IP, PPPoE (Point-to-Point Protocol over Ethernet), PPTP (Point-to-Point
Tunneling Protocol), Transparent Bridge or Router Plus NAT Mode. Users
can choose according to their actual network structure. You can nd detail setting
processintheusermanual.
Figure 3-5 WAN connection type selection item
10
3.3 Remote Management
Thefunctioncanenableuserstomanagethesecurityrouteratremotesitesandto
allowtechnicalpersontoassistyouinsolvingnetworkproblem.
Step 1. GotoFirewall General Policy.
Figure 3-6 The rewall setting button
Figure 3-7 General Policy setting page
Step 2. Click Enable to active Remote Management. And then enter the control
portyouwanttouse.Thedefaultvalueis8080.
Step 3. Click Applytosavetheconguration.Andyoucantypethehttp://WAN
IP address: 8080toaccesstherouterfromtheremoteside.
Altri manuali per SG-4800
1
Indice
Altri manuali Planet Router di rete
Planet
Planet XRT-401C Manuale utente
Planet
Planet WNAP-7335 Manuale utente
Planet
Planet ADE-3110 Manuale utente
Planet
Planet FNSW-1601 Manuale utente
Planet
Planet ADSL 2/2+ VPN Firewall Router ADW-4302A v2 Manuale utente
Planet
Planet WGSW-2620HP Manuale utente
Planet
Planet FNSW-2400PS Manuale utente
Planet
Planet VIP-280 Manuale utente
Planet
Planet IGS-604HPT-M12 Manuale utente
Planet
Planet G.SHDSL.bis Bridge Router GRT-504 Manuale utente
Planet
Planet FGSW-2620 Manuale utente
Planet
Planet FSD-805 Manuale utente
Planet
Planet GRT-402 Manuale utente
Planet
Planet GS-4210 SERIES Manuale utente
Planet
Planet WDRT-1202AC Manuale utente
Planet
Planet ADE-4400 Manuale utente
Planet
Planet ADSL VPN/Firewall Router ADW-4200 Manuale utente
Planet
Planet IGS-5225-20T4C2X Manuale utente
Planet
Planet FNSW-4800v2 Manuale utente
Planet
Planet 802.11g Wireless Access Point / Bridge... Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza