Planet GSW-4804SF Manuale utente

48-Port 10/100/1000Mbps with 4-Port

Shared SFP Web Smart Switch

GSW-4804SF

Quick Installation Guide

Table of Contents

Package Content.............................................................................................. 3

Requirements ................................................................................................ 3

Start Web Management.................................................................................... 4

While IP Address be changed or forgotten admin password – ............................. 6

Customer Support .......................................................................................... 8

Package Content

Thank you for purchasing PLANET 48-Port 10/100/1000Mbps with 4-Port Shared

SFP Web Smart Switch, GSW-4804SF. Terms of “Switch” in following section of

this Quick installation guide means the GSW-4804SF.

Upon open the box of the Switch and carefully unpack it. The box should contain

the following items:

The Switch x 1

This Quick Installation Guide x 1

User’s manual CD x 1

RS-232 Console cable x 1

Power Cord x 1

Rubber feet x 4

Two rack-mounting brackets with attachment screws x1

If any item is found missing or damaged, please contact your local reseller for

replacement.

Requirements

The GSW-4804SF provide remote Web interface for manage; the following

equipments are necessary for further management.

Network cables: Use standard network (UTP) cables with RJ45 connectors.

Subscriber PC installed with Ethernet NIC (Network Card)

The operate system of subscriber PC that running Windows 98/ME, NT4.0, 2000/XP,

MAC OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols.

Start Web Management

The PLANET GSW-4804SF provides a built-in browser interface. You can manage

the Switch remotely by having a remote host with Web browser, such as Microsoft

Internet Explorer, Netscape Navigator or Mozilla Firefox.

The following shows how to startup the Web Management of the Switch, please

note the Switch is congured through an Ethernet connection, make sure the

manager PC must be set on the same IP subnet address, for example, the

default IP address of the Switch is 192.168.0.100 (the factory-default IP address),

then the manager PC should be set at 192.168.0.x (where x is a number between

1 and 254, except 100), and the default subnet mask is 255.255.255.0.

Use Internet Explorer 5.0 or above Web browser, enter default IP address

http://192.168.0.100

Default IP Address: 192.168.0.100

Default Account: admin

Default Password: admin

To access the Web interface then the Web login screen appears in Figure 1.

Figure 1. Web Login Screen of GSW-4804SF

After entering the username and password (default user name and password is

“admin”) in login screen (Figure 1 appears). The Web main screen appears as

Figure 2.

Figure 2. Web Main Screen of GSW-4804SF

Now, you can use the Web management interface to continue the Switch

management, please refer to the user manual for more.

Note

For security reason, please change and memorize the new pass-

word after this first setup.

While IP Address be changed or forgotten admin

password –

To reset the IP address to the default IP Address “192.168.0.100” and the user

name / password to factory default mode (default user name and password is

admin).

Connect a serial cable to a COM port on a PC or notebook computer and to serial

(console) port of the Switch. The console port of the Switch is DCE already, so

that you can connect the console port directly through PC without the need of Null

Modem.

Figure 3. Console port connection of GSW-4804SF

A terminal program is required to make the software connection to the Switch.

Windows Hyper Terminal program may be a good choice. It can be accessed from

the Start menu. Click START, then Programs, Accessories and then Hyper Terminal.

MS-DOS based terminal program such as PC-PLUS, PROCOMM, can also make the

connection with the Switch built-in software. The COM port should be congured

as:

Baud: 9600

Parity: None

Data bits: 8

Stop bits: 1

Flow Control: None

Once the terminal has connected to the device, power on the Switch, the terminal

will display that is perform the loading GSW-4804SF program procedures. When

the “Waiting 2 seconds : Press <d> for default parameters” text appears,

please press “d” from your keyboard then the Switch will perform the reset device

to factory default mode procedure and the screen appears in Figure 4.

Figure 4. Loading Default Parameters of GSW-4804SF

Note

This Console interface only provide reset system to factory default

mode, for further switch management. Please access GSW-4804SF

Web interface for further management.

Customer Support

Thank you for purchase PLANET products. You can browse our online FAQ resource

at the PLANET web site rst to check if it could solve you issue. If you need more

support information, please contact PLANET switch support team.

PLANET online FAQ:

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address:

support_switch@planet.com.tw

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks

belong to their respective owners.

Altri manuali per GSW-4804SF

Indice

Altri manuali Planet Interruttore

Planet

Planet ISW-1022MT Manuale utente

Planet

Planet POE-151 Manuale utente

Planet

Planet GS-5220-8P2T2S Manuale utente

Planet

Planet FNSW-1601 Manuale utente

Planet

Planet MGS-6320-8HP2X Manuale utente

Planet

Planet LRP-822CS Manuale utente

Planet

Planet IGS-6325-8T4X Manuale utente

Planet

Planet FSD-Series Manuale utente

Planet

Planet GSW-1601 Manuale utente

Planet

Planet IGS-6325-16P4S Manuale utente

Planet

Planet GSD-1020 Manuale utente

Planet

Planet FSD-804PS Manuale utente

Planet

Planet IPM-8221 Manuale utente

Planet

Planet FSD-504HP Manuale utente

Planet

Planet FSD-1600 Manuale utente

Planet

Planet GSD-800 Manuale utente

Planet

Planet FGSD-910P Manuale utente

Planet

Planet GS-5220 Series Manuale utente

Planet

Planet IGS-10020PT Manuale utente

Planet

Planet IGS-10020MT Manuale utente

Planet

Planet IPOE-270 Manuale utente

Planet

Planet IGS-20160HPT Manuale utente

Planet

Planet GS-4210-8UP2S Manuale utente

Planet

Planet IKVM-8010 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente