Planet SGSD-1022 Manuale utente

Management Security Switch

SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

Quick Installation Guide

Table of Contents

1. Package Content.......................................................................................... 3

2. Requirements .............................................................................................. 4

3. Terminal Setup ............................................................................................ 5

4. Logon to the Console ................................................................................... 6

5. Congure IP address.................................................................................... 7

Show the current IP address ....................................................................... 7

Congure IP address................................................................................... 7

6. Start Web Management................................................................................ 9

While IP Address be changed or forgotten admin password – .......................11

Customer Support ....................................................................................12

1. Package Content

Thank you for purchasing PLANET Layer 2 Managed Switch, SGSD-1022 / SGSD-

1022P / SGSW-2840 / SGSW-2840P. Terms of “Managed Switch” means the

Switches mentioned titled in the cover page of this Quick installation guide, i.e.

SGSD-1022, SGSD-1022P, SGSW-2840 and SGSW-2840P.

Open the box of the Managed Switch and carefully unpack it. The box should

contain the following items:

The SGSD / SGSW Managed Switch x 1

User’s manual CD x 1

Quick installation guide x 1

RS232 cable x 1

Rubber feet x 4

Two rack-mounting brackets with attachment screws x 1

Power Cord x 1

If any item is found missing or damaged, please contact your local reseller for

replacement.

2. Requirements

Workstations of subscribers running Windows 98/ME, NT4.0, 2000/XP, MAC OS9

or later, Linux, UNIX or other platform compatible with TCP/IP protocols.

Workstation installed with Ethernet NIC (Network Card)

Serial Port connect (Terminal)

t Above PC with COM Port (DB-9)

Ethernet Port connect

t Network cables - Use standard network (UTP) cables with RJ45 connectors.

t Above PC installed with WEB Browser and JAVA runtime environment Plug-in

Note

It is recommended to use Internet Explore 6.0 or above to access

SGSD / SGSW Managed Switch.

3. Terminal Setup

To congure the system, connect a serial cable to a COM port on a PC or notebook

computer and to serial (console) port of the SGSD / SGSW Managed Switch. The

console port of the SGSD / SGSW Managed Switch is DCE already, so that you can

connect the console port directly through PC without the need of Null Modem.

SGSD / SGSW Managed Switch

RS-232

PC / Workstation

with

Terminal emulation software

Serial Port Serial Port

9600,8,n,1

A terminal program is required to make the software connection to the SGSD /

SGSW Managed Switch. Windows’ Hyper Terminal program may be a good

choice. The Hyper Terminal can be accessed from the Start menu.

1. Click START, then Programs, Accessories and then Hyper Terminal.

2. When the following screen appears, make sure that the COM port should be

congured as:

Baud: 9600

Parity: None

Data bits: 8

Stop bits: 1

Flow Control: None

4. Logon to the Console

Once the terminal has connected to the device, power on the SGSD / SGSW

Managed Switch, the terminal will display that it is running testing procedures.

Then, the following message asks the login user name and password. The factory

default user name and password as following, and the login screen in Figure 4-1

appears.

User name: admin

Password: admin

Figure 4-1 SGSD / SGSW Managed Switch Console Login screen

Note

1. For security reason, please change and memorize the new pass-

word after this first setup.

2. Only accept command in lowercase letter under console inter-

face.

5. Congure IP address

The SGSD / SGSW Managed Switch is shipped with default IP address as following.

IP Address : 192.168.0.100

Subnet Mask : 255.255.255.0

To check the current IP address or modify a new IP address for the Switch, please

use the procedures as follow:

Show the current IP address

1. On “Console#” prompt, enter “show ip interface”.

2. The screen displays the current IP address, Subnet Mask and Gateway. As show

in Figure 5-1.

Figure 5-1 Show IP information screen

Congure IP address

3. On “Console#” prompt, type “congure” to enter the conguration Mode.

4. On “Console (cong)#” prompt, enter the following command and press

<Enter>. As show in Figure 5-2.

Console(cong)# interface vlan 1

Console(cong-if)# ip address 192.168.1.100 255.255.255.0

The previous command would apply the follow settings for the switch.

IP: 192.168.1.100

Subnet Mask: 255.255.255.0

Figure 5-2 Set IP address screen

5. Repeat step 1 to check if the IP address is changed.

If the IP is successfully congured, the Switch will apply the new IP address setting

immediately. You can access the Web interface of SGSD / SGSW Managed Switch

through the new IP address.

Note

If you do not familiar with console command or the related param-

eter, enter “help” anytime in console to get the help description.

6. Start Web Management

The following shows how to start up the Web Management of the SGSD / SGSW

Managed Switch. Note the SGSD / SGSW Managed Switch is congured through an

Ethernet connection, please make sure the manager PC must be set on the same

IP subnet address.

For example, the default IP address of the SGSD / SGSW Managed Switch is

192.168.0.100, then the manager PC should be set at 192.168.0.x (where x

is a number between 1 and 254, except 100), and the default subnet mask is

255.255.255.0.

PLANET Managed Switch

RJ-45 / UTP Cable

PC / Workstation

with

IE Browser

IP Address:

192.168.0.x

IP Address:

192.168.0.100

Figure 6-1 IP Management diagram

1. Use Internet Explorer 6.0 or above Web browser, enter IP address

http://192.168.0.100 (the factory-default IP address or that you have just

changed in console) to access the Web interface.

2. When the following dialog box appears, please enter the default user name

“admin” and password “admin” (or the username/password you have changed

via console). The login screen in Figure 6-2 appears.

Default User name: admin

Default Password: admin

Figure 6-2 Login screen

3. After entering the username and password, the main screen appears as Figure

6-3.

Figure 6-3 Web Main Screen of SGSD / SGSW Managed Switch

4. Now, you can use the Web management interface to continue the Switch

management. The Switch Menu on the left of the Web page let you access

all the commands and statistics the Switch provides. Please refer to the user

manual for more.

Altri manuali per SGSD-1022

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Planet Interruttore

Planet

Planet NOVASwitch FNSW-8086F Manuale utente

Planet

Planet IGS-10020HPT-U Manuale utente

Planet

Planet POE-1200 Manuale utente

Planet

Planet WGSW-52040 Manuale utente

Planet

Planet HPOE-1200G Manuale utente

Planet

Planet GSW-1600HP Manuale utente

Planet

Planet FNSW-1600 Manuale utente

Planet

Planet WGSW-20160HP Manuale utente

Planet

Planet IAP-2000PE Manuale utente

Planet

Planet GS-5220-16P2XV Manuale dell'operatore

Planet

Planet ISW-504PS Manuale utente

Planet

Planet XGS-5240-24X2QR Manuale utente

Planet

Planet IGS-10020MT Manuale utente

Planet

Planet FSD-5816 Manuale utente

Planet

Planet FSD-804P Manuale utente

Planet

Planet IFGS-1022HPT Manuale utente

Planet

Planet FGSD-1022P Manuale utente

Planet

Planet IGS-500T Manuale utente

Planet

Planet GSD-808HP Manuale utente

Planet

Planet WGS-5225-8MT Manuale utente

Planet

Planet GS-5220-8P2T2S Manuale utente

Planet

Planet GSD-804P Manuale utente

Planet

Planet IGS-1020TF Manuale utente

Planet

Planet IGS-6325-4UP2X Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente