Plantronics BackBeat Pro Manuale utente

BackBeat PRO

User Guide

Contents

What's in the box 3

Headphone overview 4

Power on/off 4

Active Noise Canceling 4

Play/pause music 4

Volume 4

Track selection 4

Open mic 4

Voice dial (phone feature) 4

Answer or end a call 4

Decline a call 4

Mute 4

Call back last call 4

Get Paired 5

NFC pairing (Android) 5

Charge 6

Adjust the fit 7

Pair second device 8

Use sensors 9

Reset Sensors 10

Airplane Mode 11

Advanced open mic 12

Customize 13

Specifications 14

Support 15

ANC

Headphones Ballistic nylon travel case

Charging cable 3.5mm Apple cable

What's in the box

ANC

Slide the switch to power on or off.

Slide the switch to activate or deactivate Active Noise Canceling (ANC). ANC will block out

unwanted noise.

Tap the Play/pause button on the left ear cup to play or pause music.

Rotate the volume wheel forward (+) or backward (–) to control the volume.

Rotate the track wheel forward or backward to control the track selection.

You will be able to hear your surroundings by tapping the Mic button when not on a call.

Press the Call button for 3 seconds, wait for the phone prompt and then tell the phone to dial

the name of a stored contact.

Tap the Call button on the right ear cup.

Press and hold the Call button for 2 seconds.

During a conversation, press the Mic button . You hear “mute on” or “mute off.” While the

microphone is muted, an alert repeats every 15 minutes.

To dial your last number you dialed, double-tap the Call button .

Headphone overview

Power on/off

Active Noise Canceling

Play/pause music

Volume

Track selection

Open mic

Voice dial (phone feature)

Answer or end a call

Decline a call

Mute

Call back last call

The first time you power on your headphones the pairing process begins.

NOTE If your phone supports Near Field Communication (NFC) go to NFC pairing (Android).

1Holding your headphones, slide the power switch to the on position. The headphone LEDs

flash red and blue.

2Activate Bluetooth®on your phone and set it to search for new devices.

•iPhone®Settings > Bluetooth > On*

•Android™Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

3Select “PLT_BBTPRO.”

Once successfully paired, the headset LEDs stop flashing.

1Ensure NFC is on and your phone’s display is unlocked. (Phones may vary.)

2Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If

necessary, accept the connection.

NOTE The headphone’s NFC tag is located on the outside of the left ear cup. (Phone tag locations

vary.)

L R

Get Paired

NFC pairing (Android)

It takes up to 3 hours to fully charge your headphones. The LEDs turn off once charging is

complete.

TIP To check the headphones battery status, tap the Call button while wearing your headphones.

Headphones must be in idle state.

Your headphones have up to 24 hours of listening time.

Charge

Adjust the headphones for a comfortable fit.

Lengthen or shorten the band until it fits comfortably. When not using your headphones, fold

the ear cushions in and against your body.

Adjust the fit

1Press and hold the Call button until the LEDs flash red and blue.

2Activate Bluetooth on your second device and follow steps 2 and step 3 in "Get Paired."

Pair second device

Smart sensors respond when you put on or take off your headphones.

Putting on your headphones will:

• Resume paused music

• Activate noise cancelling (when switched on)

• Answer an incoming call

• Transfer an active call to headphones

Taking off your headphones will:

• Pause music (while music is playing)

• Deactivate noise cancelling (when switched on)

• Transfer an active call to mobile phone

Enabling or disabling Smart Sensors

When your headset is powered on and in an idle state, press and hold the mic button and the

call button for more than 4 seconds. You will hear a voice prompt alerting you of the change.

ANC

Use sensors

You may need to reset the sensors if they are not working as expected.

1Connect your headphones to the USB port on your computer using the charging cable.

2Lay the headphones on a non-metallic surface and wait at least 10 seconds.

3Disconnect the headphones and try the sensor features again.

Reset Sensors

Altri manuali per BackBeat Pro

Indice

Altri manuali Plantronics Cuffie

Plantronics

Plantronics Voyager SURROUND 80 UC Manuale utente

Plantronics

Plantronics DISCOVERY 925 Manuale utente

Plantronics

Plantronics CS70 Series Guida di riferimento

Plantronics

Plantronics BackBeat FIT 3100 Series Manuale utente

Plantronics

Plantronics BackBeat SENSE Manuale utente

Plantronics

Plantronics TriStar TriStar Headset Manuale utente

Plantronics

Plantronics Poly Voyager FREE 60 Manuale utente

Plantronics

Plantronics SupraPlus CS351N Manuale utente

Plantronics

Plantronics BackBeat 903+ Manuale tecnico

Plantronics

Plantronics Stereo SupraPlus USB Manuale utente

Plantronics

Plantronics BackBeat PRO 5100 Manuale utente

Plantronics

Plantronics BackBeat 500 SERIES Manuale utente

Plantronics

Plantronics HW251 liGo Manuale utente

Plantronics

Plantronics Backbeat FIT Manuale utente

Plantronics

Plantronics BackBeat FIT 3200 Series Manuale utente

Plantronics

Plantronics Stereo SupraPlus USB Manuale utente

Plantronics

Plantronics Voyager PRO UC v2 Manuale utente

Plantronics

Plantronics BackBeat PRO 2 Scheda tecnica

Plantronics

Plantronics BackBeat FIT 500 Series Manuale utente

Plantronics

Plantronics BackBeat GO 410 Series Manuale utente

Plantronics

Plantronics RIG 500 PRO Series Manuale utente

Plantronics

Plantronics BackBeat 903 Manuale utente

Plantronics

Plantronics Blackwire 420 series Manuale utente

Plantronics

Plantronics DISCOVERY 925 Manuale utente

Manuali Cuffie popolari di altre marche

Sony

Sony MDR-NC8 Manuale utente

AUSounds

AUSounds AU-Stream Manuale utente

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuale utente

Philips

Philips SHE3622 Manuale utente

Insignia

Insignia NS-CAHBTSPORT Manuale utente

Movie Vision

Movie Vision HP-400 Manuale utente

MobiFren

MobiFren SM Pro Manuale utente

Motorola solutions

Motorola solutions PMLN8120 Manuale utente

Jaybird

Jaybird freedom Guida all'installazione

Sony

Sony MDR-ED12LP Manuale utente

HiFuture

HiFuture Tidy Buds Pro Manuale utente

Creative

Creative CB2530 Manuale utente

Renkforce

Renkforce RF FTVK-100 Manuale utente

Philips

Philips SHQ3000 Manuale utente

Sennheiser

Sennheiser 500371 Manuale utente

Califone

Califone 2924AV Manuale utente

Philips

Philips EARGEAR HE205 Series Manuale utente

Technics

Technics EAH-AZ80 Manuale utente