Plantronics VOYAGER PRO Manuale utente
Plantronics Voyager®PRO
User Guide
ii
Welcome
Thank you for purchasing the Plantronics
Voyager PRO headset. This guide contains
instructions for setting up and using your
new headset.
Before using this product, please refer to the
For Your Safety booklet for important safety,
charging, battery and regulatory information.
Registering Your Product
Visit www.plantronics.com/productregistration
to register your product online so we can provide
you with the best service and technical support.
Getting Assistance
The Plantronics Technical Assistance Center
is ready to assist you. You can find answers to
frequently asked questions, ask a question
using e-mail, receive service over the Internet,
or speak directly with a representative.
Visit www.plantronics.com/support or call your
country support line mentioned at the back of
this user guide.
NOTE If you are considering returning
this headset, please contact the Technical
Assistance Center first.
NOTE For pairing your headset, your Passkey
(PIN code) is 0000.
iii
Contents
Package Contents and Accessories ........................................... iv
Charging Your Headset ................................................................2
Checking the Battery Status ..............................................3
Automatic Battery Status Alerts .........................................3
Pairing Your Headset....................................................................4
How to Pair Your Headset with
Your Phone for the First Time ............................................4
Adjusting the Fit ...........................................................................6
Changing Eartips................................................................7
Headset Controls and Indicators..................................................8
Using More Than One Bluetooth®Phone (multipoint) ................11
How to Initiate a Call ........................................................11
How to Answer a Call While Talking
on the Other Paired Phone...............................................11
Troubleshooting..........................................................................12
Product Specifications ...............................................................13
iv
Package Contents and Accessories
Volume Up (+) and
Down (-) Buttons
Mute (press +/- buttons
simultaneously)
Micro USB Charging Jack
Dual Microphones with Wind Screens
Call Control Button
1
Package Contents and Accessories
For a complete list of accessories available for purchase, go to www.plantronics.com
Eartip
Status Indicator LED
Power On/Off
Check Battery Button AC Charger
(100-240v)
Soft Gel Eartips (S, M, L)
and Foam Eartip Covers
2
Charging Your Headset
Using the AC Charger
Your new headset performs best when fully
charged. Do not use your headset while it is
connected to the charger. While your headset is
charging, the indicator light glows red.
NOTE Never charge the battery where the temperature
may fall below 0°C (32°F) or rise above 40°C (104°F)
– for example, in an unattended motor vehicle. Do not
charge the battery while it is unattended.
CHARGING TIME
1.5 hours ........................
Full charge
30 minutes .....................
Minimum charge
before first use
2
1
3
Checking the Battery Status
To check the status, the headset must be powered
on. Tap the power button. The indicator light flashes
red to show the battery charge level.
Automatic Battery Status Alerts
When the battery charge is very low, a tone and
voice prompt in English will automatically occur.
Charging Your Headset
CHARGE INDICATOR LIGHTS
Red Flashes Battery Level
SMore than 2/3 full
S S 1/3 to 2/3 full
S S S Less than 1/3 full
LOW BATTERY WARNINGS
Battery Level Tone Voice Prompt
30 minutes of
talk time remaining
(this alert only
occurs during
an active call)
Double high
tone every
15 minutes
“Battery Low”
repeats every
30 minutes
10 minutes
of talk time
remaining
Triple high
tone every
30 seconds
“Recharge
Battery” repeats
every 3 minutes
4
Pairing Your Headset
Before using your headset for the first
time, you must pair it with your Bluetooth
enabled phone. Your new headset includes
Plantronics QuickPair™Technology to simplify
the Bluetooth setup process. The first time
you turn your headset on, your headset
automatically enters pairing mode for 10
minutes (the indicator light flashes red and
blue). Once paired successfully, your headset
stays on for instant use.
If not successfully paired after 10 minutes, your
headset automatically powers off. When you
turn the headset on again, it automatically goes
into pairing mode until successfully paired with
a Bluetooth phone.
NOTE This headset is equipped with Secure
Simple Pairing (SSP). If your phone supports SSP,
you will not need to enter a Passkey (PIN code).
How to Pair Your Headset with Your
Phone for the First Time
1 Turn on your phone’s Bluetooth feature.
For most phones, select Settings/Tools >
Connections > Bluetooth > On. See your
phone’s user guide for more information.
2 Turn the headset on.
Press and hold the power button until the
indicator light flashes red/blue. The headset
is now in pairing mode.
If you don’t see the red/blue flash, press and
hold the power button to turn your headset
off, and then press and hold the power
button again until you see the red/blue flash.
5
Pairing Your Headset
3 Use the commands on your phone to
locate your headset.
For most phones, select Settings/Tools >
Devices > Bluetooth > PROPlantronics.
See your phone’s user guide for more
information.
4 If prompted for the Passkey (PIN code),
enter 0000.
Pairing is successful when the indicator on
your headset flashes blue. Your headset is
now connected and ready to use.
NOTE To pair your headset with an additional
phone, turn on the phone then repeat steps 2
through 4. See page 11 for more information
on multipoint.
2
1
SETTINGS
SETTINGS
T me and Date
Phone Sett ngs
Bluetooth
Sound Sett ngs
Network Services
Securi y
Reset Se ting
3
4
BLUETOOTH
BLUETOOTH
Discover/
Search
BLUETOOTH
BLUETOOTH
PROPlantronics
PASSKEY
0000
6
Adjusting the Fit
Ensure a proper fit for optimal sound clarity
and comfort.
1 Guide the earloop behind your ear and
place the headset so that the speaker
and eartip rest comfortably in your ear.
2 For optimal voice clarity, pivot the boom
up or down to point the microphones
toward the corner of your mouth.
The headset can be worn on either ear by
adjusting the mic boom.
1 Pivot the boom into an upright position.
2 Rotate the boom and speaker to the
other side of the headset.
2
1
1
2
Altri manuali per VOYAGER PRO
7
Indice
Altri manuali Plantronics Cuffia
Plantronics
Plantronics Voyager 6200 UC Manuale utente
Plantronics
Plantronics Discovery 975 Manuale utente
Plantronics
Plantronics DISCOVERY 925 Manuale utente
Plantronics
Plantronics M2300 Guida di riferimento
Plantronics
Plantronics Blackwire 725 Manuale utente
Plantronics
Plantronics CS50-USB Manuale utente
Plantronics
Plantronics Voyager Legend Manuale utente
Plantronics
Plantronics BLACKWIRE C610-620 MOC - QUICK START GUIDES Manuale utente
Plantronics
Plantronics EXPLORER 220 Manuale utente
Plantronics
Plantronics Savi 400 Dimensioni
Plantronics
Plantronics Savi W740-M Manuale utente
Plantronics
Plantronics VOYAGER 520 Manuale utente
Plantronics
Plantronics Savi Office WO100 Manuale utente
Plantronics
Plantronics EncorePro HW510V Manuale utente
Plantronics
Plantronics Audio 910 Manuale utente
Plantronics
Plantronics Voyage Legend UC Manuale utente
Plantronics
Plantronics Persono Manuale utente
Plantronics
Plantronics EXPLORER 210 Manuale utente
Plantronics
Plantronics Voyager 4200 UC series Manuale utente
Plantronics
Plantronics MX200 Manuale utente
