PLK Technologies Optian Manuale utente
User Manual ver1.1
PLK Technologies.,Co.Ltd.
ADAS CAM
Crash-Avoidance ADAS CAM
Thank you for purchasing 『OPTIAN』.
The manual contains the functional explanation and operating method of OPTIAN.
Please read the instructions carefully before attempting to operate.
The manual may be subject to change without any prior notice
Copyright and Trademark/ PLK technologies Co., Ltd.
This manual is under the protection of copyright law and all the rights are legally
protected. Except in some legally acceptable cases based on the copyright law , it is
restricted to copy , modify and translate this manual without any prior consent .
『ADAS 』or Advanced Driver Assistance System is an advanced safety assist system that can help
a driver to realize and avoid potential risks of collisions with the utilization of warning signals
Features
Main Features of OPTIAN!!
FCW ( Forward Collision Warning )
LDW (Lane Departure Warning )
FCDA ( Front Car Departure Alert )
DVR ( Driving Recorder )
Full HD Clear Display
Touch LCD Monitor
Event/ Motion Detection CCTV Recording in Parking Mode
Battery Discharge Prevention
GPS Track Recording
Contents
Safety
Caution Warning & Caution
Components
Check Components
Main Body & Functions
Rear Camera & Functions
Installation Precautions
Installation Method
Main
Functions
Forward Collision Warning
Lane Departure Warning
Front Car Departure Alert
DVR
Manual Guide Video Playback
Configuration
Data Manager
Program Installation Method
Screen Composition
Button Explanation
Maintenance SD Card Format
Troubleshooting
Appendix Specification
Settings Angle Adjustment
Vehicle Type Setting
Start Booting up
Screen Types & Explanation
Manual
Guide
Basic Menu
ADAS CAM
DVR
Safety Caution
!
Warning!
ADAS functions are designed to assist the driver, however, it is not a substitute for careful
driving and we take no responsibility for any damage caused by careless driving . Drivers
should comply with local traffic regulations and should not rely on the ADAS CAM
completely but use the system to assist only.
! Do not use modified power-supply
cables , use only genuine products
supplied by the manufacturer .
Modification may cause vehicle damage
or physical injury due to explosion or fire.
! Apply only the rated voltage otherwise
it may cause vehicle damage or physical
injury due to explosion or fire.
! Do not install the product in a location
where it interferes with driver‟s vision.
! Do not configure the product while
driving .
! Do not disconnect the power supply
cable randomly as it may damage the
product. Contact your installer for
support .
! It is important to remove the SD card
and download any important data as
soon as possible after an accident to
avoid loss of recorded data
! Do not use force to operate
! Do not press the LCD display with sharp
objects as it may damage the LCD
surface or touch panel.
! Insert and remove the SD card only
when the recording function is turned off
! The Micro SD card is a consumable
product. Errors may occur if used for long
periods. It is necessary to format data
and replace the SD card periodically.
!
Warning!
ADAS functions are designed to assist the driver, however, it is not a substitute for careful
driving and we take no responsibility for any damage caused by careless driving . Drivers
should comply with local traffic regulations and should not rely on the ADAS CAM completely
but use the system to assist only.
! If the Micro SD card is damaged or the product is
powered off prematurely, it may result in accidental data
loss
! The ADAS functions only work when the speed rete
received from GPS signal exceeds the set speed value .
The ADAS functions are not a substitute for the driver‟s
care and attention, the functions are an assistance to the
driver only.
! Under following conditions the ADAS functions may not
perform properly:
•Extreme weather
•Extremely curved roads
•Roads without painted lanes
•When the camera image is compromised due to
reflected light from an object on the dashboard .
•When installed incorrectly
•When the horizon line calibration is incorrect
! Keep the camera lens and windscreen
clean to ensure clear video and proper
ADAS functions.
! Tinted windscreens will affect the
brightness and definition of recorded
videos. OPTIAN may not receive GPS
signal if the windscreen has a tinted
metallic film . Try to attach to the area
without metallic film.
! Do not disassemble or modify OPTIAN
as it will result in data loss, damage and
will void the warranty cover.
Safety Caution
Components
Rear camera
Connection Cable
Main Body
Cigar Jack /
Power Supply Cable
Rear Camera Micro SD
card
User Manual
SD Card Adapter
•Specifications of the above components are subject to change according to the
components supply.
•Above images are just to help user‟s understanding and actual components may look a
little different .
Front
Camera
(Full HD)
Internal GPS
Detachable
Bracket
Main Body
Security
LED
Volume
Adjustment
Button
Menu
Button Touch
LCD
Manual
Recording
Button (REC) Camera
Angle
Adjuster
MIC
DC power port
(3.5 pi)
Micro
SD Card
Socket
Rear Camera Connection
Continuous
Power Supply
Connection
Rear Camera / Internal Camera
Rear Camera
(VGA)
Integral bracket
Indication
LED DC Power-supply Port
•When attaching the rear camera to
the rear window glass , please make
sure the bracket is on the right side.
* the rear camera angle can be adjusted
by rotating the main body
FCW (Forward Collision Warning)
1. FCW function generates a warning signal when there is a potential risk of collision to the vehicle
ahead .
2. The collision risk is evaluated through TTC ( Time To Collision ) and it is classified by 3 phases.
•TTC : The calculated value of the distance and the relative speed between a front vehicle and the
host vehicle
•Sensitive : TTC 0.9sec / Normal : TTC 0.7sec / Insensitive : TTC 0.5 sec
•Secondary Warning : TTC 0.4 sec
•The TTC sensitivity can be adjusted from the menu.
3. FCW function works when the vehicle is moving at the speed rate which is above the set speed
value.
•Default Speed Setting: 30km/h
•ADAS operating speed value can be adjusted from 20 to 80(km/h) in the menu.
4. FCW can help avoid accidents caused by careless driving behaviors such as adjusting air conditioning
or other distractions.
Main Functions
ADAS functions are designed to assist the driver, however, it is not a substitute for careful driving and we take no responsibility for
any damage caused by careless driving . Drivers should comply with local traffic regulations and should not rely on the ADAS CAM
completely but use the system to assist only.
Altri manuali per Optian
1
Indice
Altri manuali PLK Technologies Telecamera da cruscotto
