POS-X ION THERMAL Manuale utente
All specications are subject to change without notice
Receipt Printer User’s Manual
MODEL : ION THERMAL
2
3
1. Parts Identications 4
2. Setting up the printer 5
2.1 Unpacking 5
2.2 Connecting the cables 6
2.3 Loading the roll paper 9
3. Control panel and other functions 12
3.1 Control panel 12
3.2 Error Indicating 12
4. Self Test 13
5. ASCII Print 14
6. Select Baudrate Mode 14
7. Hexadecimal Dump 15
8. Printer cleaning 16
9. Specications 17
9.1. General Specications 17
9.2. Auto Cutter Specications 19
9.3. Interface 19
9.4. Electrical Characteristics 19
9.5. Environmental Requirements 20
9.6. Reliability 20
9.7. Certication 20
10. Command List 21
Table of Contents
4
1. Parts Identifications
TOP COVER
POWER SWITCH
CONTROL LABEL
Open this cover to
load or replace paper.
Used to turn on/off
power to the printer
Features LED indicators
to indicate printer status
and switches to operate
the printer.
INTERFACE CONNECTOR(SERIAL) INTERFACE CONNECTOR(USB)
PERIPHERAL DRIVE CONNECTOR
POWER CONNECTOR
5
2-1. Unpacking
Your printer box should include these items. If any items are damaged or missing, please contact your
dealer for assistance.
The Printer User's Manual Roll Paper
Interface Cable(optional) Adaptor(Optional)
2. Setting Up the Printer
6
2-2. Connecting the Cables
You can connect up the cables required for printing to the printer.
They all connect to the connector panel on the back of the printer, which is shown below :
Before connecting any of the cables, make sure that both the printer and the computer are turned off.
For connection to a
host computer.
For connection to a
host computer. For connection of
the AC adapter.
Never unplug the
AC adapter while
the printer is on.
Connects to peripheral units
such as cash drawers, etc.
Do not connect this to
a telephone.
INTERFACE CONNECTOR(USB)
PERIPHERAL DRIVE CONNECTOR
POWER CONNECTOR
INTERFACE CONNECTOR(SERIAL)
7
2-2-1.Interface Connector
Serial Interface
PIN SIGNAL I/O DESCRIPTION
2 TxD Output Printer transmit data line RS-232C level
3 RxD Input Printer receive data line RS-232C level
4, 20 DTR Output Printer handshake to host line RS-232C level
6 DSR Input Data Send Ready
1, 7 GND - System Ground
USB Interface
PIN SIGNAL I/O DESCRIPTION
1 +5V - +5V
2 DATA- - Printer transmit data line
3 DATA+ - Printer transmit data line
4 GND - System Ground
1 2
4 3
8
2-2-2. Cash Drawer Connector
The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.
The driver is capable of supplying a maximum current of 0.1A for 510ms or less when not printing.
PIN SIGNAL DESCRIPTION
1 Signal GND -
2 Drawer kick-out drive signal 1 Output
3 Drawer open/close signal Input
4 +24V -
5 Drawer kick-out drive signal 2 Output
6 Signal GND -
9
2-3. Loading the Roll Paper
Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the
paper glued to the core because the printer cannot detect the paper end correctly.
(Turn off power switch)
1. Make sure that the printer is not receiving data; Otherwise, data may be lost.
2. Open the paper roll cover by pushing down the cover open button.
3. Remove the used paper roll core if there is one inside.
4. Insert new paper roll as shown.
Indice
Altri manuali POS-X Stampante
POS-X
POS-X XR210 Manuale utente
POS-X
POS-X XR520 Manuale utente
POS-X
POS-X EVO Green Manuale utente
POS-X
POS-X EVO-RP1-U Manuale utente
POS-X
POS-X XR210 Manuale utente
POS-X
POS-X EVO-PK2-1AP Manuale utente
POS-X
POS-X EVO-RP1 Manuale utente
POS-X
POS-X ION-PT2 Manuale utente
POS-X
POS-X XR-200 Manuale del proprietario
POS-X
POS-X EVO-RP1-U Manuale utente
