POSIFLEX RT-5015 Manuale utente

Package Contents

RT-5015 15” fanless touch terminal or

RT-5016 15.6” fanless touch terminal or

RT-5115 15” fanless touch terminal or

RT-5116 15.6” fanless touch terminal (x 1)

Power adapter (x 1)

Power cord (x 1)

User manual (x 1)

16940900010 Ver. A0

http://www.posiflex.com

RT-5015/5016/5115/5116

Fanless Touch POS Terminal

User Manual

Views of RT-5015/5016/5115/5116

Front View

15” RT-5015/5115 15.6” RT-5016/5116

Rear View

Bottom View

System Back Cover

Stand Cover

Cable Exit

RT-5015/5016/5115/5116

P-Cap Touch Panel

LED indicator

Base Stand

Camera (Optional)

Attachment Bay

Release Lever for System Back Cover

Screw for Fire-Resistant

System Back Cover

Left-Side View

View of I/O Interface of RT-5015/5016/5115/5116

Positioning your POS for a Perfect Viewing Angle

Steady the base with one hand, and then tilt the screen

in the direction shown by the arrow in the figure.

Please do NOT press on the LCD panel while

setting up the tilt angle.

Power Button

Brightness Adjustment Button

＋

Brightness Adjustment Button －

USB 3.0 Ports

DB9 COM Port

CR Port

LAN Port

DC IN

Power

Connector

Mini DisplayPort

RJ50 COM Ports

USB 2.0 Ports

Installing Power Adapter and Cables

The following provides instructions required to install your cables.

1. Lay the terminal with its rear facing

towards you and tilt the screen all the way

down.

2. Remove the system back cover.

2.1 If the system back cover is fire-resistant, first locate the screw as

indicated in the figure, and then remove it.

2.2 Hold down the release lever at the bottom of

the system back cover and then pulling the

cover outwards.

3. To remove the stand cover from the base, grab the top side of the

cover, (1) lift the stand cover up gently, (2) pull it at a 45 degree

angle, and then (3) slide it in the horizontal direction shown by the

arrow.

Screw for Fire-Resistant

System Back Cover

4. Connect the connector of the power adapter

to the DC-IN power jack. If necessary,

properly insert other cables into the correct

port.

5. Neatly arrange the cables. Locate the cable holder inside the base as

shown in the figure. Push down the lever to release if from the hook,

pass the cable through cable holder, and then press down the lever

again to lock it onto the hook.

6. Make sure the cord can be held into place

and passed through the cable exit after

sliding back the stand cover.

7.1 Place back the sytem back cover. Make sure

it is well locked into place with a click sound.

7.2 For the fire-resistant system back cover, please insert another

screw into the screw hole indicated in the figure, and secure it.

Cable holder

Screw for Fire-Resistant

System Back Cover

8. Make sure the cable could be pulled out of

the cable exit from the bottom of the base.

Installing Optional Upgrade Kits and Peripherals

RT-5015/5016/5115/5116 is an expandable model which allows you to

upgrade its own capacity by additionally installing multiple peripheral devices,

such as magnetic stripe reader (MSR), fingerprint or iButton sensors, and 2nd

rear-mount POS monitor, according to your preference. The following will

give you brief instructions on how to expand on your current POS system with

these optional upgrade kits. Before proceeding with the installation of

peripherals, please make sure the POS system is completely shut down to

prevent damage.

Installing Side Mount Upgrade Kits

Located at left side on the back of your system

unit, side mount compartment is mainly used for

installation of side-mounted equipment, such as

magnetic stripe reader. For detailed installation

instructions, please refer to the user manual

specific to the device which you intend to

mount onto the terminal.

Installing Rear-Mount POS Monitor

RT-series POS terminal also allows you to

additionally install rear-mount POS monitor to

expand its functionality. Regarding the step-

by-step instructions which aim to help you

mount it onto your POS system, Please refer

to the user manual specific to the device you

intend to install.

Installing PoweredUSB or USB Hub

Please go through the below steps to complete the installation of

PoweredUSB or USB hub.

1. After tilting the screen all the way down, remove the system back

cover.

1.1 If the system back cover is fire-resistant, first locate the

screw as indicated in the figure, and then remove it.

1.2 Hold down the release lever at the

bottom of the system back cover and

then pulling the cover outwards

2. To remove the stand cover from the base, grab the top side of the

cover, (1) lift the stand cover up gently, (2) pull it at a 45 degree

angle, and then (3) slide it in the horizontal direction shown by the

arrow.

3. Align the two screw bolts at the bottom of PoweredUSB or USB hub

with rail slots in the base.

Screw for Fire-Resistant

System Back Cover

Push PoweredUSB or USB hub in the

direction shown by the arrow to lock it

into place.

To remove the PoweredUSB or USB hub from the rail slots, press

down the hubs first and then push it outwards.

5. Install power adaptor extension cable, USB cable, and power adaptor

for PoweredUSB hub.

5.1 Insert one end of the provided power

adaptor extension cable to DC Input port

of PoweredUSB hub and another end to

DC-in power jack of the terminal.

5.2 Insert mini-USB connector of the USB

cable to PoweredUSB hub and another

end to USB3.0 port of the terminal.

5.3 Connect the connector of the power

adapter to DC Output port of

PoweredUSB hub, and the other end to the

electrical outlet.

6. To Install USB cable for USB hub, Plug

Type-A connector of USB cable to USB

Port of USB hub and the other end of USB

cable to USB3.0 port of the POS terminal.

7. Neatly arrange your cable and then slide

back the stand cover.

8. .

8.1 Place back the sytem back cover. Make sure it

is well locked into place with a click sound

8.2 For the fire-resistant system back cover, please insert another

screw into the screw hole indicated in the figure, and secure it.

Status LED Indicator

LED status indicator, which is located at the bottom edge of the LCD panel, is

mainly responsible for notifying users of the current system status by emitting

various LED signals. In the chart provided below, it describes all the possible

LED status as a quick reference.

15” RT-5015/5115

LED Status

Description

Off

System power OFF

Green

System standby

Blue

System power ON

15.6” RT-5016/5116

LED Status

Description

Off

System power OFF

Orange

System standby

Blue

System power ON

Screw for Fire-Resistant

System Back Cover

Powering ON/OFF RT-5015/5016/5115/5116

Power ON RT-5015/5016/5115/5116

Press down the power button to power on the POS.

Power OFF RT-5015/5016/5115/5116

In most cases, press the power button of the POS to

power the system off. If the terminal fails to turn off

the machine for unknown reasons, please be advised

to hold the power button more than 10 seconds to

force a shutdown of the system.

Installing an Operating System

You are highly advised not to install an operating system on RT-

5015/5016/5115/5116 without professional instructions. Improper installation

could lead to system malfunction or failure. Please contact with your dealers

about the issues of operating system installation.

Performing System Recovery

For RT-5015/5016/5115/5116 model with preloaded operating systems,

Recovery DVD which includes useful utilities will be provided in the package

to assist you in efficiently restoring or repairing your damaged system.

However, you are not encouraged to recover your system without the help of

system integrators. Please be advised to contact your service center for further

assistance with system recovery.

Operation Environment

To prevent RT-5015/5016/5115/5116 from overheating, it is suggested to

position your terminal in a well-ventilated working environment. In doing so,

please be advised to keep the POS terminal at least 25mm away from other

devices to ensure the machine is properly cooled down and functioning

normally.

Power

Button

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali POSIFLEX Terminale touch

POSIFLEX

POSIFLEX KS - 2010 Manuale utente

POSIFLEX

POSIFLEX TP/LT- 5600 Manuale utente

POSIFLEX

POSIFLEX TX-5600 Manuale utente

POSIFLEX

POSIFLEX KS - 6910 series Manuale utente

POSIFLEX

POSIFLEX KS-6315 Manuale utente

POSIFLEX

POSIFLEX XT-3817-G2 Manuale utente

POSIFLEX

POSIFLEX KS-6812A Manuale utente

POSIFLEX

POSIFLEX KS - 6715 Manuale utente

POSIFLEX

POSIFLEX PS-3515-G2 Manuale utente

POSIFLEX

POSIFLEX PS-3415 Manuale utente

POSIFLEX

POSIFLEX MT-4308W Series Manuale utente

POSIFLEX

POSIFLEX Jiva KS-6615 Series Manuale utente

POSIFLEX

POSIFLEX PS-3416 Manuale utente

POSIFLEX

POSIFLEX FT-6315 Manuale utente

POSIFLEX

POSIFLEX XT-3815-G2 Manuale utente

POSIFLEX

POSIFLEX HT-4600 Series Manuale utente

POSIFLEX

POSIFLEX RT-2015-G2 Manuale utente

POSIFLEX

POSIFLEX KS - 6915 Manuale utente

POSIFLEX

POSIFLEX Cash Drawer CR400X Manuale utente

POSIFLEX

POSIFLEX KS - 6910 series Manuale utente

POSIFLEX

POSIFLEX TX-4200 Manuale utente

POSIFLEX

POSIFLEX HS-2510W-2D Manuale utente

POSIFLEX

POSIFLEX PB-4700DVI Manuale utente

POSIFLEX

POSIFLEX XP-3000 Series Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente