Poynting OMNI-214 Manuale utente

Version 1.0

OMNI-214

User Guide

South Africa

Unit 4, N1 Industrial Park

Landmarks Ave

Samrand, 0157

South Africa

Tel: +27 12 657 0050

[email protected]ch

Europe

Kronstadler Straße 4,

81677 München

Germany

Tel: +49 89 2080 265 38

Mob.: +49 176 529 733 50

sales-europe@poynting.tech

USA

1804 Owen Court,

Suite 104, Mansfield,

TX 76063

Tel: +1 817 533-8130

sales-us@poynting.tech

PCL-A-OMNI-0214-V1

Version 1.0

Index

Packing Check List

Introduction

Antenna Mounting

Precautions

Cable Routing

Safety

PCL-A-OMNI-0214-V1

1. Packing Check List

Item

Description

Quantity

A-OMNI-0214-V1

Antenna Only

M4 Stainless Steel

Machine Screw

and Washer

Easy Fit Wall Plug

and Screw

Stainless Steel

L-Bracket

Stainless Steel

Econo Bracket

M6 x 90mm Stainless

Steel U-Bolts

M6 Nyloc and

Standard Stainless

Steel Nuts

M6 Stainless Steel

Flat Washers

Version 1.0

Appearance of Components

Antenna Unit

Stainless Steel Bracket Assembly

M4 Machine Screw and M4 Flat Washer

Easy Fit Wall Plug and Screw

PCL-A-OMNI-0214-V1

Tools Required

6mm Masonry Drill Bit

Impact Drilling Machine

Screwdriver –Cross Slot/Philips

Hammer

Safety Goggles

Spanner/Wrench

Version 1.0

2. Introduction

This User Guide provides information on the

installation instructions of the Omni-directional

antenna (A-OMNI-0214).

Antenna Configuration 1

Pole mount with supplied L-Bracket

Exploded View

Antenna Configuration 2

Wall mount with supplied wall plugs.

Exploded View

PCL-A-OMNI-0214-V1

3. Antenna Mounting Precautions

•Place the antenna at the highest point

possible and ensure that there are not any

obstructions surrounding the antenna.

•In order to avoid communication

interference, ensure that the antenna is

placed at least 0.5m away from other

antennas and metal objects.

•Avoid installing the antenna near a

chimney, as the smoke and soot emitted

by the chimney can obstruct the signal

level achieved by the antenna.

•Install the antenna away from heat sources

and flammable gases.

4. Cable Routing

•Survey the planned cable route and look for

any blocked passages. Consider alternate

routes to find the best available path.

Always keep the cables as short as possible

to make sure that minimum cable losses are

achieved.

•Note: Take advantage of any existing cable

channels. e.g wiring conduits to route the

cables.

•Avoid running cables through components

or sharp apertures that may cause excessive

chafing. Doing so may erode the jacket and

break signal continuity. Also, avoid kinking,

pinching, or twisting the cable during a run.

Version 1.0

•Use cable ties to secure the antenna cables.

When handling the antenna cables, it is

essential you follow these basic rules:

•Never pull on the cable connectors;

pull only on the cable.

•Tighten the connectors and ensure

that the cables don’t rattle loose.

5. Safety

•If you are installing an antenna for the first

time or unsure about how to install your

antenna, obtain the help of a professional

installer.

•Carefully survey the installation site before

installation to locate secure handholds,

dangerous conditions (such as power lines

and weak roofs) and the safest and most

convenient placement for ladders if

necessary.

•The antenna may not be used as a climbing

or pulling device.

•Considerations must be taken when

mounting the antenna that people do not

hang or pull on it.

•When installing your antenna, remember:

1. Do not install near power lines as they

can electrocute you.

2. Do not install on a wet or windy day or

when there is lightning or thunder in the

area.

3. Wear shoes with rubber soles and heels,

protective clothing (long sleeve shirt or

jacket) and rubber gloves.

PCL-A-OMNI-0214-V1

4. Avoid installation while under the

influence of drugs, alcohol or

medication.

5. Make sure that any loose-fitting

jewellery or clothing is secured and tie

back long hair as they can get caught

in moving parts during installation.

6. If the antenna assembly starts to fall, get

away from it and let it fall to avoid

harming yourself.

•When drilling, remember:

1. Use safety goggles when drilling the

holes.

2. Avoid using bits that are dull, bent or

damaged.

3. Be aware of where your fingers are in

relation to the drill bit when using the

drilling machine.

4. To stop the drilling machine, let the drill

chuck come to a complete stop on its

own. Do not grasp the chuck in an

attempt to stop the drill bit.

5. Avoid awkward hand positions where a

sudden slip could cause a hand to

move into the drill bit or cutting tool.

CAUTION:

Antennas must be installed to provide a separation

distance of at least 20cm from all persons so as to

comply with SAR (Specific Absorption Rate) RF

Exposure requirements.

European Waste Electronic Equipment Directive 2002/96/EC

Please ensure that old waste, electricals

and electronics are recycled.

Directive 2011/65/EU (RoHS 2)

This product is fully compliant with the RoHS 2

directive.

Indice

Altri manuali Poynting Antenna

Poynting

Poynting OMNI-121 Manuale utente

Poynting

Poynting OMNI-700 Series Manuale utente

Poynting

Poynting OMNI-703 Manuale operativo

Poynting

Poynting PUCK-V1 Manuale utente

Poynting

Poynting PowerfulSignal PUCK-1 Manuale utente

Poynting

Poynting OMNI 400 Manuale utente

Poynting

Poynting OMNI-297 Manuale utente

Poynting

Poynting OMNI-280 Manuale utente

Poynting

Poynting EPOYNT-4 Manuale utente

Poynting

Poynting OMNI-232-02 Manuale utente

Poynting

Poynting PUCK-V1-W Manuale utente

Poynting

Poynting OMNI-293 Manuale utente

Poynting

Poynting OMNI-600-V1 Manuale utente

Poynting

Poynting XPOL-2-5G Manuale utente

Poynting

Poynting OMNI-493 Manuale utente

Poynting

Poynting OMNI-900 Manuale utente

Poynting

Poynting PowerfulSignal PUCK-12 Manuale utente

Poynting

Poynting MIMO-4 Manuale utente

Poynting

Poynting LPDA-0092-04 Manuale utente

Poynting

Poynting OMNI-702 Manuale utente

Poynting

Poynting Wavehunter Manuale utente

Poynting

Poynting OMNI-706 Manuale utente

Poynting

Poynting OMNI-900 Manuale utente

Poynting

Poynting Moray Series Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente