Poynting PUCK-V1 Manuale utente

Revision 2.0

2Revision 2.0

3Revision 2.0

Packing Check List

Introduction

Antenna Mounting

Precautions

Cable Routing

Safety

4Revision 2.0

Item

Description

Quantity

*PUCK-V1 Antenna Only

M4 x 10mm Flat Head

Stainless Steel Screws

(Attached to

the antenna)

35mm Threaded Spigot

(Attached to

the antenna)

75mm Threaded Spigot

Magnetic Base

Pole/Wall Mount

Bracket

Plastic Nut

(Attached to

the antenna)

Adhesive Foam Seal

(Attached to

the antenna)

Grip Extenders

5**

(Attached to

the antenna)

10.

SMA (F) to RP-SMA

(M) Adapter

2**

*Antenna will differ with different versions

**Quantity will differ with different versions

5Revision 2.0

Antenna Unit

M4 x 10mm Flat Head Stainless Steel Screws

35mm Threaded Spigot

75mm Threaded Female Spigot

Magnetic Base

6Revision 2.0

Pole/ Wall Mount Bracket

Plastic Nut

Adhesive Foam Seal

Grip Extenders

*SMA(F) to RP-SMA(M) Adapters

*Antenna with Wi-Fi only

7Revision 2.0

Drills (Pilot drill (3mm) and Hole saw (22mm)

or step drill (4-22mm))

Impact Drilling Machine

Hammer

Safety Goggles

27mm Spanner/Wrench

8Revision 2.0

Masking Tape

Centre Punch

Drilling Template

(Available on www.poynting.tech/downloads)

9Revision 2.0

This User Guide provides information on the

installation instructions of the Omni-directional

antenna (PUCK-V1 Series).

Threaded Spigot Mounting

Use the Drill template below or download the 1:1

drill template from

http://www.poynting.tech/downloads.

•Choose the mounting location carefully and a

position at least 50cm from heat sources,

with a clear line of sight to the sky.

•Once you have decided on the location and

checked that there are no obstructions such

as cables or channels below the mounting

surface, for the fastening nut and cables to

pass through, use the downloaded 1:1 drill

template to mark the mounting location.

•To prevent the marking tool or drill sliding off

course, use masking tape over the drilling

point to help hold the drill point in place. The

masking tape also prevents hot shavings

from the drill or hole saw which could

penetrate and damage the painted surface.

•Clean the entire surface on which you plan to

mount the antenna. Cleaning is done so as

not to damage the vehicle’s paint and to

ensure good contact of the foam surface to

the mounting area.

•Alcohol wipes can be used to remove oil and

dirt from the surface.

•The 35mm threaded Spigot should be used to

secure the antenna to a surface structure of

20mm thickness or less. Likewise, the 75mm

threaded Spigot should be used to secure the

antenna to a surface structure of 60mm

thickness or less.

10 Revision 2.0

Securing the antenna

•Fasten the required spigot with the Flat head

screws.

•Clean the plastic surface of the antenna base

and threaded spigot.

•Peel off one of the wax paper layers from the

foam seal and stick the foam seal to the

plastic surface.

•Carefully slide the cable through the hole.

•Peel off the second wax paper layer and

firmly press the antenna down onto the

surface.

•Tighten the nut so that it compresses the

foam seal.

Note: Be careful not to overtighten the nut.

Altri manuali per PUCK-V1

Indice

Altri manuali Poynting Antenna

Poynting

Poynting Moray Series Manuale utente

Poynting

Poynting OMNI-703 Manuale operativo

Poynting

Poynting OMNI-280 Manuale utente

Poynting

Poynting XPOL-2-5G Manuale utente

Poynting

Poynting OMNI 291 Manuale utente

Poynting

Poynting OMNI-702 Manuale utente

Poynting

Poynting OMNI-214 Manuale utente

Poynting

Poynting XPOL-1-5G Manuale utente

Poynting

Poynting PowerfulSignal PUCK-1 Manuale utente

Poynting

Poynting XPOL-1 Manuale utente

Poynting

Poynting EPOYNT Manuale utente

Poynting

Poynting OMNI-704 Manuale utente

Poynting

Poynting OMNI-232-02 Manuale utente

Poynting

Poynting OMNI-493 Manuale utente

Poynting

Poynting RIPPLE Manuale utente

Poynting

Poynting OMNI-600-V1 Manuale utente

Poynting

Poynting LPDA-0092-04 Manuale utente

Poynting

Poynting Wavehunter Manuale utente

Poynting

Poynting OMNI-900 Manuale utente

Poynting

Poynting OMNI-900 Manuale utente

Poynting

Poynting OMNI 400 Manuale utente

Poynting

Poynting OMNI-121 Manuale utente

Poynting

Poynting OMNI-706 Manuale utente

Poynting

Poynting OMNI-402 Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente