Poynting OMNI-402 Manuale utente

Version: 2.0

OMNI-402

User Guide

South Africa

Unit 4, N1 Industrial Park

Landmarks Ave

Samrand, 0157,

South Africa

Tel: +27 12 657 0050

[email protected]

Europe

Kronstadler Straße 4,

81677 München

Germany

Tel: +49 89 2080 265 38

Mob.: +49 176 529 733 50

[email protected]

www.ime.de

17-05-21

2 A-OMNI-0402_PCL

www.ime.de

17-05-21

Version: 2.0

Index

1. Packing Check List 4

2. Optional Accessories 6

3. Introduction 7

4. Installation Instructions 8

5. Antenna Mounting 9

Precautions

6. Cable Routing 9

7. Safety 10

www.ime.de

17-05-21

4 A-OMNI-0402_PCL

Packing Check List

Item Description Quantity

1. A-OMNI-0402

Antenna only

2. M4 Allen Cap

Screws

4. L-Bracket

5. Econo bracket

stainless steel

6. M6x90mm U-Bolts

stainless steel

7. M6 Nuts/Nylock

nuts stainless steel

8. M6 Flat Washers

stainless steel

9. Adapter Base

10. Seal

Allen key

11.Locking nut 1

www.ime.de

17-05-21

Version: 2.0

The appearance of each component

Antenna Unit

Adapter Base and Seal

Stainless steel bracket assembly

Allen cap screw, allen key and locking

nut

www.ime.de

17-05-21

6 A-OMNI-0402_PCL

Optional Accessories

A-BRKT-037: Marine at mount antenna

bracket stainless steel

AA-BRKT-038: Marine ratchet rail mount

antenna bracket stainless steel

A-BRKT-039: Heavy duty marine mount

antenna bracket stainless steel

www.ime.de

17-05-21

Version: 2.0

Introduction

This User Guide provides information on the

installation instructions of the Omni-directional

marine antenna (A-OMNI-0402)

Antenna Conguration 1

Pole mount with supplied L-Bracket

Antenna Configuration 2

Marine mount with optional bracketry

using the provided allen key.

Exploded View

www.ime.de

17-05-21

8 A-OMNI-0402_PCL

Installation Instructions

•Open the antenna package and

conrm that all listed components are

available.

•Consider the antenna mounting

precautions below before installation.

Straight cable entry

Slide the RF

cable through

the bracket pipe,

seal and adapter

base. Fasten the

adapter base to

the antenna

using the

provided allen

key.

Assembled

antenna with

straight entry

cable.

Side cable entry

Use a at screw

driver on the

knock out edge of

the adapter base

to break the knock

out section as

shown above.

A le might be

required to remove

sharp edges.

Assembled

antenna

with side

entry cable.

www.ime.de

17-05-21

Version: 2.0

Cable Routing

• Survey the planned cable route and look for

any blocked passages. Consider alternate

routes to nd the best available path.

Always keep the cables as short as possible

to make sure that minimum cable losses are

achieved.

• Note: Take advantage of any existing cable

channels. e.g wiring conduits to route the

cables.

• Avoid running cables through components

or sharp apertures that may cause excessive

chang. Doing so may erode the jacket and

break signal continuity. Also, avoid kinking,

pinching, or twisting a cable during a run.

Antenna Mounting Precautions

•Place the antenna at the highest point

of the vessel and ensure that there

aren’t any surrounding obstructions to

the antenna.

•In order to avoid communication

interference, ensure that the antenna

is placed at least 0.5m away from other

antennas and metal objects.

•Avoid installing the antenna near the

vessel’s chimney, as the smoke and

soot emitted by the chimney can

obstruct the signal level achieved by

the antenna.

•Install the antenna away from the

vessel’s heat sources and ammable

gases.

www.ime.de

17-05-21

10 A-OMNI-0402_PCL

Safety

• The antenna may not be used as a climbing

or pulling device.

• Considerations must be taken when

mounting the antenna that people do not

hang or pull on it.

• Use safety goggles when drilling the

antenna hole.

• Avoid using bits that are dull, bent or

damaged.

•Be aware of where your ngers are in

relation to the drill bit when using the drilling

machine.

• To stop the drilling machine, let the drill

chuck come to a complete stop on its own.

Never grasp the chuck in an attempt to

stop the drill bit.

•Avoid operating while under the inuence

of drugs, alcohol or medication.

•Make sure that any loose tting jewellery or

clothing is secured and tie back long hair as

they can get caught in moving parts during

installation.

• Avoid awkward hand positions where a

sudden slip could cause a hand to move

into the drill bit or cutting tool.

• Use cable ties to secure the antenna

cables. When handling the antenna cables,

it is essential you follow these basic rules:

• Never pull on the cable connectors; pull

only on the cable.

• Never run cables in a manner that

interferes with the driver’s ability to

safely operate the boat.

• Tighten the connectors and ensure that

the cables don’t rattle loose.

www.ime.de

17-05-21

Indice

Altri manuali Poynting Antenna

Poynting

Poynting XPOL-1-5G Manuale utente

Poynting

Poynting OMNI-702 Manuale utente

Poynting

Poynting OMNI-600-V1 Manuale utente

Poynting

Poynting PUCK-5 Manuale utente

Poynting

Poynting Moray Series Manuale utente

Poynting

Poynting MIMO-4 Manuale utente

Poynting

Poynting OMNI-700 Series Manuale utente

Poynting

Poynting OMNI-232-02 Manuale utente

Poynting

Poynting OMNI-297 Manuale utente

Poynting

Poynting XPOL-24 Manuale utente

Poynting

Poynting OMNI-900 Manuale utente

Poynting

Poynting XPOL-2 Manuale utente

Poynting

Poynting PowerfulSignal PUCK-1 Manuale utente

Poynting

Poynting OMNI-493 Manuale utente

Poynting

Poynting PUCK-V1 Manuale utente

Poynting

Poynting OMNI-706 Manuale utente

Poynting

Poynting MIMO-3-V2 Manuale utente

Poynting

Poynting PowerfulSignal PUCK-12 Manuale utente

Poynting

Poynting PUCK-V1 Manuale utente

Poynting

Poynting LPDA-0092-04 Manuale utente

Poynting

Poynting PUCK-V1-W Manuale utente

Poynting

Poynting OMNI-214 Manuale utente

Poynting

Poynting OMNI-280 Manuale utente

Poynting

Poynting XPOL-2-5G Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente