PROAIM CINEMA Series Manuale utente
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Polaris Portable Camera Dolly with 8 Track
(DL-PLRS-4P)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Assemb ly Manua l
Polaris Dolly with 16 Wheels
75mm Bowl Adapter
4 x Foot
2 x Universal Track
Ends
Centre Support
4 x Track
Aluminum Pipes
100mm Bowl
Adapter Flight Case
5mm Allen
Key
Conversion Ring
An-Tilt Safety
Break
2
Funcons
Polaris dolly, designed for hassle-free
operaons and a smaller footprint, all
while delivering stability and safety.
Aluminum
Speed Rails
Dolly Plaorm
16 Wheels
Universal
Track Ends
Rail is an extruded system with low
weight and maximum strength to
support the dolly.
Ecient braking
system that keeps
the dolly stable in
one posion.
16-wheel design with oang
trucks and high-speed SS
bearings, which provide
smooth, quiet and
squeak-free movement.
An Tilt Safety
Break
Adjustable feet to
work on rough
surfaces with utmost
ease.
Foots
To achieve shots at
higher heights,
3
• Insert the foot in the provided holes of the
Universal Track Ends.
Centre Support Assembly
• Insert and ghten the remaining three feet in
the Track Ends, as shown in the image.
• To open the clamp of the Track Ends, loosen
its knob per your requirement.
• Now, insert a track rail into the clamp, as
shown in the image.
• Aer properly inserng the track rail into the
clamp, secure it by ghtening the knob.
• To form an 8 track aluminium rail, aach
two 4 rails.
• To mount the universal track end on a
C-Stand (Not Included), loosen the knob.
NOTE: To achieve shots at higher heights, one
can mount the track end on C-Stands
(Not Included).
4
• Place the Polaris dolly with a 75mm bowl
adapter onto the track.
NOTE: The handles of the dolly plaorm should
be inside the track, as shown in the image.
Furthermore, the dolly's wheels should be
properly aligned on the track for smooth dolly
movement.
• Aer mounng the track ends onto the
C-Stand (Not Included), ghten the provided
knob to secure the setup.
• The Dolly has an aached Mitchell mount
and a 75mm bowl adapter.
• To remove the aached Mitchell mount and
75mm bowl adapter, use the 5mm Allen key
to remove the bolts.
• Loosen the knob to open the safety brake.
• Mount the Safety Brake on the side of the
portable dolly plaorm.
• Adjust the posion of the bracket to prevent
the plaorm from lng.
• Aer mounng the safety brake, secure it
with a knob, as shown in the image.
Feature: It has an ecient braking system that
keeps the Dolly steady in one posion.
Safety Break Assembly
Bowl Adapters Setup
• Loosen the knob of the Centre support bar
and aach the bar below the track rail system
using a support Stand (Not Included).
NOTE: An 8 track assembling has been used
for assembly here. So, for a longer track, a cen-
ter support needs to be placed in the middle of
the track.
5
• The image shows the removed 75mm bowl
adapter.
• To aach the 100mm bowl adapter, loosen all
three aached bolts using the Allen key.
• Aer loosening the bolts, remove them, as
shown in the image.
• Mount the 100mm bowl adapter on the dolly
plaorm.
NOTE: The Dolly oers mulple mounng op-
ons, such as a Mitchell mount, 75mm and
100mm bowl adapters, an oponal 150mm
Mitchell bowl mount, and a cheese plate.
• Aer mounng the bowl adapter, insert three
bolts under the Dolly and secure them by
ghtening them using the Allen key.
• Loosen the locking knob of the 100mm Fluid
Head (Not Included) and insert it into the
bowl adapter through the screw.
100mm Fluid Head Assembly
• Aer mounng the uid head (Not Included)
on the bowl, secure it by inserng the
Conversion ring & locking knob from the
boom side of the Dolly.
NOTE: To prevent the 75mm or 100mm or any
other uid head from slipping through the dolly
plaorm's Centre hole, we use a conversion ring
to reduce the gaping of the hole size of the
dolly plaorm.
6
• Aer properly securing the Fluid Head
(Not Included) through the locking knob and
conversion ring, push the red ratchet knob to
remove the uid head’s camera plate.
• Aer removing the camera plate, aach it to
the boom of the camera (Not Included) and
ghten the bolts using the Allen key.
• Mount the camera (Not Included) onto the
Fluid Head (Not Included).
• The camera (Not Included) has now been
mounted on the Fluid Head (Not Included)
and fully secured with the help of the ratchet
knob.
Feature: It allows you to mount your camera
directly on the Dolly at oor level, & on a tripod,
giving your setup exibility.
Versale Mounng Opon
Versale Dolly oers mulple mounng opons, such as a Mitchell mount, 75mm and
100mm bowl adapters and an oponal 150mm Mitchell bowl mount, and a cheese plate.
7
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM POLARIS PORTABLE CAMERA DOLLY WITH 8FT TRACK
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Altri manuali per CINEMA Series
70
Questo manuale è adatto per i seguenti modelli
1
Altri manuali PROAIM Accessori per fotocamere
PROAIM
PROAIM Cambird Pro SL-CBPR-01 Manuale utente
PROAIM
PROAIM TK-CLIP-00 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM CAMTREE HUNT Manuale utente
PROAIM
PROAIM VI-252-00 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM Pro CINEMA Series Manuale utente
PROAIM
PROAIM P-18-JS Manuale utente
PROAIM
PROAIM FF-WRLS-DR Manuale utente
PROAIM
PROAIM CST-100-01 Manuale utente
PROAIM
PROAIM TDL-275 Manuale utente
PROAIM
PROAIM P-MTCL-STD-BLK Manuale utente
PROAIM
PROAIM TRK-16-25 Manuale utente
PROAIM
PROAIM TRK-4P Manuale utente
PROAIM
PROAIM BP12C-BMP40R Manuale utente
PROAIM
PROAIM MB-10 Manuale utente
PROAIM
PROAIM VI-2AXS-01 Manuale utente
PROAIM
PROAIM BP-302-01 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM WS-284 Manuale utente
