PROAIM DL-BRZA-01 Manuale utente
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Breeza Video/Film Camera Dolly Slider
with Track Ends (DL-BRZA-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Breeza Dolly
3 x Bolts
Sizes: (6 x 12 mm)
2 x End Spacers
An-Tilt Safety
Brake
Flat Mount Plate
Bag Packing
75mm Bowl
Adapter 3 x Type Allen Keys
Sizes: 2.5, 4mm & 5mm
2 x Wrench Sizes: 17 & 13mm
1 x Low-Prole Middle
Support Spacer
Heavy Duty Sled
4 x Double Wheels
100mm Bowl Adapter
2
End Spacers Assembly
Insert a 4 track into the clamp. Once the
track is properly fitted into the clamp, tightly
secure it with the knob, as shown in the
image.
The height of the end feet of the end spacers
can be adjusted according to your setup
requirement with the help of a knob.
The end feet can be used in both, Hi-Hat and
Low-Hat mode accordingly.
The same process is to be followed for the
other track.
NOTE: It comes with track-ends for overall
secure and smooth track running.
To insert a track in the end spacers, rst
loosen the knobs of the clamp and then slide
up the clamp to easily t the track.
Now place the breeza dolly onto the 4 track.
The handles part of the dolly plaorm should
be inside of the track as shown. Make sure all
wheels are aligned correctly on the track and
dolly runs smoothly.
NOTE: Proaim Breeza Compact Portable Slider
Dolly integrates the latest technology with
supreme quality to maximize your creave
potenal.
Breeza Dolly Setup
3
Properly secure with a knob aer mounng
the safety brake. Follow the same process on
the other side.
Now mount a 75mm bowl adapter, insert the
screws and properly secure the adapter with
the help of an Allen key.
The 75mm bowl adapter is mounted on the
dolly plaorm, as shown in the image.
NOTE: It has a 16-wheel design with oang
trucks that gives smooth, squeak-free move on a
straight or curved track.
The dolly plaorm already has a 100mm bowl
adapter mount. To mount a 75mm bowl, first
loosen the screws using an Allen key and
remove the 100mm bowl.
NOTE: The Breeza dolly plaorm is designed
with a Bowl mount 75mm, 100mm, and an at
base mount.
Mount the Safety Brake on side of the Breeza
dolly plaorm. Adjust the posion of the
bracket so it goes under the track to prevent
the plaorm from lng out.
Loosen the knob to properly open the safety
brake.
An-Tilt Safety Brake Assembly
4
Mount Fluid Head on the Bowl Adapter
Aer mounng the uid head on the bowl,
secure it properly by inserng the locking
knob from the boom side.
To mount the at plate, rst remove the
75mm bowl adapter from the dolly plaorm.
For this, use an Allen key, loosen all the screws
and then take out the 75mm bowl adapter.
Mount the at plate on the dolly plaorm,
then insert the screws by aligning to the
boom and properly ghten.
After properly securing the fluid head
(Not Included), mount a camera
(Not Included) on it.
NOTE: Breeza Dolly Slider is sturdy enough to
take a massive payload. And the end-clamps
mount tripods and light stand in seconds. It also
includes so-grip rubber ball feet, support
bracket, and safety wheels that give overall
secure, leveled & greater performance.
Insert the uid head (Not Included) into the
bowl through a screw.
Mount the uid head (Not Included) onto the
at plate and to properly secure, insert a bolt
from the middle/centre of the boom, as
shown in the image.
5
Mount the end spacers onto the stand
(Not Included) and tighten with the help of a
knob.
NOTE: If you need higher level shots, then you
can put end spacers on Stands.
Mount the Centre Support Spacer onto the
stand. Aer mounng the spacer onto the
stand (Not Included), properly secure it with a
knob.
Aach the Centre Support spacer under the
centre of the track system help of a
Support stand (Not Included).
Insert an 8 track into the clamp. Once the
track is properly ed into the clamp, secure it
with the help of a knob, as shown in the
image. Follow the same process on the other
side.
After properly securing the fluid head
(Not Included), mount a camera on it.
The 8 track is now mounted on the centre
support spacer.
8 Track Setup
6
Mount the Safety Brake on side of the Breeza
dolly plaorm. Adjust the posion of the
bracket so it goes under the track to prevent
the plaorm from lng out.
Then aach the uid head (Not Included) to
the bowl adapter, as shown in the image.
To secure the uid head (Not Included) from
the boom, insert the locking knob from the
top and secure it properly.
To mount the camera (Not Included)
under-slung, attach the bowl adapter aligning
the bottom threads, then insert the screws and
properly ghten using an Allen key.
Now place the breeza dolly onto the 8 track.
The handles part of the dolly plaorm should
be inside of the track as shown. Make sure all
wheels are aligned correctly on the track and
dolly runs smoothly.
NOTE: The whole dolly system is Quick & Easy
to Set up for a steady workow. It saves a lot of
your valuable producon me.
Underslung Camera Setup
7
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our
utmost support and care until you use our product.
YOUR PROAIM BREEZA VIDEO/FILM CAMERA DOLLY SLIDER WITH TRACK ENDS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Altri manuali PROAIM Accessori per fotocamere
PROAIM
PROAIM Flymate SL-187-00 Manuale utente
PROAIM
PROAIM VI-TRIW-00 Manuale utente
PROAIM
PROAIM P-CST Manuale utente
PROAIM
PROAIM FLN-CTDB Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM P-22 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM PT-GOLD Manuale utente
PROAIM
PROAIM Spinhawk Professional Manuale utente
PROAIM
PROAIM KITE-22-POPULAR Manuale utente
PROAIM
PROAIM SS90 Manuale utente
PROAIM
PROAIM P-BPDP-19 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM RS-1-00 Manuale utente
PROAIM
PROAIM SL-CNL Manuale utente
PROAIM
PROAIM VH-OBTR-01 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM P-HLR Manuale utente
PROAIM
PROAIM P-OHBP-01 Manuale utente
