Promate Impact Manuale utente
Impact
Acoustic Over-Ear HiFi Stereo Headphones
WIRELESS .WIRED .HANDSFREE
MUSIC & CALLS
STREAMING
Acoustic Over-Ear HiFi Stereo Headphones
• Impact
• Micro-USB Charging Cable
• Carrying Case
• 3.5mm Audio Cable
• User Guide
Introduction
Packaging Contents
Experience a remarkable musical esta with Impact. Connect Impact to your
devices wirelessly and through traditional wires. Impact includes all the must
have specs needed for an excellent pair of headphones. Impact is embedded
with passive noise cancellation technology along with advanced protein
leather ear cushion to provide optimum comfort t. Its classic, simple metal
and leather design will never fail to make a style statement wherever you go.
With music play time of up to 14hrs, take Impact practically everywhere
(including long ights) and listen to non-stop music. Impact also supports
in-line music function and built-in mic function, thus, pick up calls whilst
listening to music. This power packed wireless headset is the ultimate set for
all music fanatics
English
1
Specication
• Bluetooth version: 4.0
• Output: 30mW
• Talk time: 14h
• Stand-by time: 540 h
• Music play time: 14h
• Wireless range: 10m
• Impedance: 32Ω
• Charging Time: 2~3 hours
Features
• Classic simple metal and leather design
• Foldable and Lightweight
• Bluetooth 4.0
• 3.5mm in-line function
• Passive Noise Cancellation
• aptx® Audio Technology
• Can connect two devices
• Works both i.e., wired and wirelessly
• High Quality Stereo Sound
• Built-in Rechargeable Battery
• With Mic-function
• In-line function
• Advanced Protein Leather Ear Cushion
• Long music play time of up to 14 hrs
English
1 2
Precautions
Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or
attached products.
• Do not disassemble the device or attempt to x it.
• Kindly use the included USB Cable to charge the product.
• Do not attempt to replace any part of this product.
• Do not crush, puncture or dispose of in re.
• Do not store or use the product in a high temperature environment,
including intense sunlight or heat.
• Avoid excessive drops, bumps, abrasions and impacts.
• If there is any reason to believe that there is internal damage to the device,
discontinue use immediately.
• If you nd that the device is too hot, is emitting an odor, or is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue
use immediately and contact our customer service.
• Always charge this product before extended storage.
• 14hrs of uninterrupted talk time
• Long lasting stand by time of up to 540 hrs
• Operating Distance of up to 10m
English
2 3
Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or
attached products.
• Do not disassemble the device or attempt to x it.
• Kindly use the included USB Cable to charge the product.
• Do not attempt to replace any part of this product.
• Do not crush, puncture or dispose of in re.
• Do not store or use the product in a high temperature environment,
including intense sunlight or heat.
• Avoid excessive drops, bumps, abrasions and impacts.
• If there is any reason to believe that there is internal damage to the device,
discontinue use immediately.
• If you nd that the device is too hot, is emitting an odor, or is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue
use immediately and contact our customer service.
• Always charge this product before extended storage.
Appearance & Interface Description
1. Multi-function button
2. LED Indicator
3. Volume Up Button
4. Volume Down Button
5. Micro-USB Interface
6. Mic
7. 3.5 mm Audio Jack
English
2
3
4
5
6
7
1
43
Turning Impact‘On’and‘O’
• Press the Multi-function button for 2 seconds.
• Once the Blue LED Light ashes twice, Impact turns ‘on’.
• Again press Multi-function button for 3 seconds and once the Red LED ashes
twice, Impact turns‘o’.
Pairing Impact with two devices at the same time
• Impact supports multi-connection of two devices.
• First, pair one device with Impact and turn o Impact.
• Then, re-do the pairing procedure with another device.
• Once the pairing is done with the second device, restart Impact and it will
automatically connect to the last connected device.
• Short press the two Volume keys simultaneously which will enable the multipoint
connection function.
• From the scanned devices, select ‘Impact’and connect it.
Pairing Impact
Pairing Impact with one Device
• Make sure the Impact’s power is‘o’.
• Press and hold the Multi-function button to enter into pairing mode and wait
until the Red and Blue Light blinks alternatively.
• Turn ’on’your phone or device Bluetooth function and search for“Impact”
From the list of the scanned devices, select“Impact”.
• Impact is now connected to your device.
Operation Instructions
English
4 5
Turning Impact‘On’and ‘O’
• Press the Multi-function button for 2 seconds.
• Once the Blue LED Light ashes twice, Impact turns ‘on’.
• Again press Multi-function button for 3 seconds and once the Red LED ashes
twice, Impact turns‘o’.
Pairing Impact with two devices at the same time
• Impact supports multi-connection of two devices.
• First, pair one device with Impact and turn o Impact.
• Then, re-do the pairing procedure with another device.
• Once the pairing is done with the second device, restart Impact and it will
automatically connect to the last connected device.
• Short press the two Volume keys simultaneously which will enable the multipoint
connection function.
• From the scanned devices, select ‘Impact’ and connect it.
Pairing Impact with one Device
• Make sure the Impact’s power is‘o’.
• Press and hold the Multi-function button to enter into pairing mode and wait
until the Red and Blue Light blinks alternatively.
• Turn ’on’your phone or device Bluetooth function and search for“Impact”
From the list of the scanned devices, select“Impact”.
• Impact is now connected to your device.
• Short press the Multi-function button to pause your music.
• Again Short press the Multi-function button to Resume/Play your music.
Navigating between Tracks via Impact
• To navigate to the next track, long press the 'Volume Up' button.
• To navigate to the previous track, long press the 'Volume Down' button.
Adjusting Volume on Impact
• To increase the volume, short press the 'Volume up' button.
• Similarly, to decrease the volume, short press the 'Volume down' button.
Play/Pause Function on Impact
•Answering Calls: Short press the Multi-function button to answer phone call.
• Ending Calls: Short press the Multi-function button to end your ongoing call.
• Rejecting Calls: Press 'Volume up' button for 2 seconds to reject an incoming
call.
• Transfer call: During an ongoing call, press the 'Volume up' button for 2
seconds to switch the call to your mobile phone. Press 'Volume up' button, for
2 seconds again to switch the call back on Impact.
• Redial Function: Press the Multi-function button twice to redial the last
number.
• Call Mute function: Press the 'Volume down' button for 2 seconds to mute the
ongoing call. Press 'Volume down' button for 2 seconds again, to unmute the
ongoing call.
Call Function on Impact
English
5 6
•Answering Calls: Short press the Multi-function button to answer phone call.
• Ending Calls: Short press the Multi-function button to end your ongoing call.
• Rejecting Calls: Press 'Volume up' button for 2 seconds to reject an incoming
call.
• Transfer call: During an ongoing call, press the 'Volume up' button for 2
seconds to switch the call to your mobile phone. Press 'Volume up' button, for
2 seconds again to switch the call back on Impact.
• Redial Function: Press the Multi-function button twice to redial the last
number.
• Call Mute function: Press the 'Volume down' button for 2 seconds to mute the
ongoing call. Press 'Volume down' button for 2 seconds again, to unmute the
ongoing call.
Playing Music via 3.5mm Audio Cable
• Connect one end of the 3.5mm Audio Cable provided to Impact and the
other end to your 3.5mm audio jack supporting device.
Note: General functions of Impact cannot be accessed when connected
via Audio Cable
Charging Impact
• Connect one end of the Micro-USB Charging Cable to Impact and the other
end to Laptop or Desktop or any other USB Port.
• Once plugged in, the Red LED Light indicates that Impact is charging.
• Once Impact is fully charged, Red LED turns into Blue.
• It takes around 2~3 hours to charge Impact.
English
6 7
• Connect one end of the 3.5mm Audio Cable provided to Impact and the
other end to your 3.5mm audio jack supporting device.
Note: General functions of Impact cannot be accessed when connected
via Audio Cable
• Connect one end of the Micro-USB Charging Cable to Impact and the other
end to Laptop or Desktop or any other USB Port.
• Once plugged in, the Red LED Light indicates that Impact is charging.
• Once Impact is fully charged, Red LED turns into Blue.
• It takes around 2~3 hours to charge Impact.
Apariencia y descripción de la interfaz
1. Botón Multifunción
2. Indicador LED
3. Botón para aumentar el volumen
4. Botón para disminuír el volumen
5. Interfaz Micro-USB
6. Micrófono
7. Jack de audio 3,5 mm
2
3
4
5
6
7
1
7 8
Spanish
Instrucciones de funcionamiento
Encender y apagar Impact
• Pulse el botón multifunción durante 2 segundos.
• Cuando la luz LED azul parpadea dos veces, Impact se enciende.
• Vuelva a pulsar el botón multifunción durante 3 segundos y cuando el LED rojo
parpadea dos veces, Impact se apaga.
Emparejar Impact
• Asegúrese de que Impact esté "o" (Apagado).
• Pulse y mantenga pulsado el botón Multifunción para entrar en el modo de
emparejamiento y espere hasta que las luces roja y azul parpadeen
alternativamente.
• Encienda la función Bluetooth del teléfono o el dispositivo y busque "Impact"
(Impacto). De la lista.
de dispositivos, seleccione "Impact".
• Ahora Impact está conectado al dispositivo.
Emparejar Impact con un dispositivo
Emparejamiento de Impact con dos dispositivos al mismo tiempo
• Impact es compatible con la multi-conexión de dos dispositivos.
• En primer lugar, empareje un dispositivo con Impact y apague Impact.
• A continuación, vuelva a realizar el procedimiento de emparejamiento con otro
dispositivo.
• Una vez nalizado el emparejamiento con el segundo dispositivo, reinicie
Impact y este se conectará automáticamente al último dispositivo conectado.
• Pulse brevemente las dos teclas de Volumen al mismo tiempo, esto permitirá la
función de conexión multipunto.
• De los dispositivos explorados, seleccione 'Impact' y conéctelo.
8 9
Spanish
Indice
Lingue:
Altri manuali Promate Cuffie
Promate
Promate PX16 Manuale utente
Promate
Promate proHarmony.3 Manuale utente
Promate
Promate Atom Manuale utente
Promate
Promate Waves Manuale utente
Promate
Promate Action Manuale utente
Promate
Promate RevoBlue Manuale utente
Promate
Promate Motion Manuale utente
Promate
Promate TrueBlue-2 Manuale utente
Promate
Promate bluTrend Manuale utente
Promate
Promate TrueBlue Manuale utente
