Promise Pegasus J2 Manuale utente
© 2012 PROMISE Technology, Inc. All Rights Reserved. PROMISE, the PROMISE logo and Pegasus
are registered or pending trademarks of PROMISE Technology, Inc. in the U.S. and other countries. All other
trademarks are the property of their respective owners. Information regarding products, services and offerings
may be superseded by subsequent documents and are subject to change without notice. For the latest information
and specications regarding PROMISE Technology, Inc. and any of its offerings or services, please contact
your local PROMISE ofce or the corporate headquarters. Visit www.PROMISE.com for more information on
PROMISE products.
Contents
English 1
Français 7
DEutsch 13
italiano 19
Русский 25
Español 31
한국어 37
日本語 43
繁體中文 49
简体中文 55
1
WARNING
Use the power adapter included with the
Pegasus J2. Using a different power adapter can
damage the device.
WARNING
Before Unplugging Thunderbolt Cable, Please be
sure to eject (unmount) the Pegasus J2 before
unplugging the Thunderbolt cable. There may
be background processes writing content to
the Pegasus J2 and prematurely unplugging the
Thunderbolt cable could lead to the loss of data.
Software Utility
To help keep your Pegasus J2 in the best working condition, you can
download the J2 Software Updater from the PROMISE Technology website at:
http://support.promise.com/support
2
J2 hardware
Performance LED Thunderbolt
Port
Power adapter receptacle
(behind protective cover)
3
Make the thUnderbolt connection
Connect a Thunderbolt cable to the Thunderbolt port on the Pegasus J2 (see
“J2 hardware” on page 2), and connect the other end of the cable to a
Thunderbolt port on your computer.
Important
Make sure the Thunderbolt cable connector is oriented
properly to be inserted into Thunderbolt ports on the J2 and
on the computer.
4
connect the power for faSter tranSfer
The power adapter can be used for faster data transfer. The power adapter is
shipped with seven detachable wall plug adapters suitable for most countries.
Please see page 61 of this guide for power adapter assembly instructions.
Note
It is recommended - but not
required - to establish the
Thunderbolt connection before
connecting the power.
5
perforMance led
You can check the LED indicator on the front to verify that the device is
functioning properly and to monitor the Thunderbolt connection performance.
When using the power adapter, the LED shines blue indicating a faster transfer
speed. Without the power adapter, the LED shines green indicating a slower
connection.
onthe deSktop
After connecting the J2, it appears as an icon on the Mac desktop. Double
click on the icon to open. Create folders on it or drag items to it to store them
on the J2.
Performance LED at full power
J2 icon on Desktop (Mac OS)
Performance LED in bus mode
(without power adapter)
ATTENTION!
If the J2 is left running (read/write) in bus mode for more than an hour,
it will feel hot. Allow the J2 to cool off for a few minutes after discon-
necting the Thunderbolt™ cable before handling it.
ATTENTION!
If the J2 is left running (read/write) in bus mode for more than an hour,
it will feel hot. Allow the J2 to cool off for a few minutes after discon-
necting the Thunderbolt™ cable before handling it.
6
SUpport
If you need further assistance or have concerns about operation of the
Pegasus J2, you can contact technical support online at:
http://support.promise.com/
SpecificationS
Drive conguration The default conguration is RAID 0. To change the RAID
conguration to RAID 1 or JBOD, please use the Support
link listed above to locate instructions available online.
Power adapter AC Input: 100-240V
DC Output 12V /1.0A (12W)
Power consumption 13.68 W with power adapter
9.8 W without power adapter (bus mode)
Temperature Operating: 5° ~ 35°C (41° ~ 95°F)
Storage: -40° ~ 70°C (-40° ~ 158°F)
Humidity Operating: 10% ~ 95% non-condensing
Storage: 5% - 95% non-condensing
Dimensions 110 x 74 x 20.5 mm (4.33 x 2.91 x 0.81 inches)
Weight J2 without power adapter: 140 grams (4.94 ounces)
Safety UL/CUL/CE/TUV/BSMI
In the package 1 Pegasus J2 1 power adapter
1 Multilanguage Quick Start Guide
7
Avertissement Adaptateur secteur
Veuillez noter qu’il est conseillé d’utiliser
l’adaptateur secteur fourni avec le Pegasus J2. Si
vous utilisez un adaptateur secteur autre que celui
indiqué expressément, vous risquez d’endommager
l’appareil.
Avertissement
Avant de débrancher le câble Thunderbolt
Veillez à éjecter le Pegasus J2 avant de débrancher
le câble Thunderbolt. Il se peut qu’un processus
d’arrière-plan d’écriture de contenu soit en cours
sur le Pegasus J2 et débrancher le câble Thunderbolt
prématurément risque d’entraîner une perte de
données
Utilitaire
Pour conserver votre Pegasus J2 dans sa condition de
fonctionnement optimale, vous pouvez télécharger l’utilitaire de mise
à jour du logiciel J2 depuis le site Web PROMISE Technology sur
http://support.promise.com/support
8
Matériel J2
LED de performances Port Thunderbolt Prise adaptateur secteur
(derrière le couvercle de
protection)
Altri manuali per Pegasus J2
1
Indice
Altri manuali Promise Magazzinaggio
Promise
Promise Vess A6600P Manuale utente
Promise
Promise VTRAK M610i Manuale utente
Promise
Promise VTrak D5000 Series Manuale utente
Promise
Promise VTrak S3000 Manuale utente
Promise
Promise PegasusPro R16 Manuale utente
Promise
Promise SmartStor DS4600 Manuale utente
Promise
Promise Vess A3120 Manuale utente
Promise
Promise Pegasus2 R6 Manuale utente
Promise
Promise Pegasus 2 R4 Manuale utente
Promise
Promise Vess A Series Manuale utente
Promise
Promise Pegasus J4 Manuale utente
Promise
Promise Pegasus M4 Manuale utente
Promise
Promise Smartstor NS4600 Manuale utente
Promise
Promise VTRAK J300S Manuale utente
Promise
Promise VTrak N1616 Manuale utente
Promise
Promise Pegasus2 R2+ Manuale utente
Promise
Promise VTrak N1008 Manuale utente
Promise
Promise VTrak J5960 Manuale utente
Promise
Promise Vess A3340s Manuale utente
Promise
Promise Vess R3600 Series Manuale utente
