Prorack K405 Manuale utente
K405
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 4 x 4
Revision No: 8H 1
Fitting Kit K405
MAX kgs (lbs)
W/P WHD
Toyota
BB, 5dr Hatch 06-+ AU 40 kgs (88 lbs) 40 kgs (88 lbs)
BB, 5dr Hatch 06-12 NZ 40 kgs (88 lbs) 40 kgs (88 lbs)
Daihatsu
Materia, 5dr MPV 06-+ EU 40 kgs (88 lbs) 40 kgs (88 lbs)
Materia, 5dr MPV 06-+ CN 40 kgs (88 lbs) 40 kgs (88 lbs)
Materia, 5dr MPV 06-11 AU 40 kgs (88 lbs) 40 kgs (88 lbs)
Materia, 5dr MPV 06-12 ZA 40 kgs (88 lbs) 40 kgs (88 lbs)
Materia, 5dr MPV 06-12 NZ 40 kgs (88 lbs) 40 kgs (88 lbs)
2
Fitting Kit K405
X
A B C 1 2 3
BB, 5dr Hatch 06-+ (AU) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
BB, 5dr Hatch 06-12 (NZ) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
Materia, 5dr MPV 06-+ (EU) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
Materia, 5dr MPV 06-+ (CN) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
Materia, 5dr MPV 06-11 (AU) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
Materia, 5dr MPV 06-12 (ZA) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
Materia, 5dr MPV 06-12 (NZ) -290mm 390mm - 910mm 890mm -
-11 -7/16ths" 15 3/8ths" - 35 13/16ths" 35 1/16ths" -
3
Fitting Kit EN
K405
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
4
Fitting Kit EN
K405
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
5
Fitting Kit EN
K405
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
6
Fitting Kit EN
K405
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Fit rubber pads (supplied with fitting kit) to
foot. Pad may vary in shape to that shown.
●Make sure the pad fits into the holes
underneath the foot.
7
Fitting Kit EN
K405
Fitment
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Clamps directly to edge of roof under the
doors
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
8
Fitting Kit EN
K405
●Tighten locking screw on both legs evenly,
2.5 Nm (1.8 ft lb).
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
9
Fitting Kit EN
K405
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Indice
Altri manuali Prorack Accessori per automobili
Prorack
Prorack K046 Manuale utente
Prorack
Prorack K869 Manuale utente
Prorack
Prorack K113 Manuale utente
Prorack
Prorack K062 Manuale utente
Prorack
Prorack K494 Manuale utente
Prorack
Prorack J-Cradle Manuale utente
Prorack
Prorack PR3206 Manuale utente
Prorack
Prorack K879 Manuale utente
Prorack
Prorack K850 Manuale utente
Prorack
Prorack PR3205 Manuale utente
Prorack
Prorack K067 Manuale utente
Prorack
Prorack K911 Manuale utente
Prorack
Prorack K793 Manuale utente
Prorack
Prorack K007 Manuale utente
Prorack
Prorack K820 Manuale utente
Prorack
Prorack K566 Manuale utente
Prorack
Prorack K015 Manuale utente
Prorack
Prorack K1016 Manuale operativo e di installazione
Prorack
Prorack K1001 Manuale utente
Prorack
Prorack K682 Manuale utente
