Prorack K530 Manuale utente

FittingKit

K530

Fitting Instructions for Basic Carrier

Instrucciones de montaje para el

sistema de transporte.

Instructions de montage pour Basic

Carrier

x 2

x 4

Revision No:

FittingKit

K530

MAX kgs (lbs)

W/P

WHD

Subaru

Impreza , 4dr Sedan 01- 07

50 kgs (110 lbs)

Impreza , 4dr Sedan 01- 07

50 kgs (110 lbs)

Impreza , 4dr Sedan 01- 07

50 kgs (110 lbs)

Impreza , 4dr Sedan 01- 07

50 kgs (110 lbs)

Impreza , 4dr Sedan 01- 07

50 kgs (110 lbs)

FittingKit

K530

First Time Installation

Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

This kit fits type A, B, C and D.

These instructions show type A crossbar

fitted. They also apply to type B, C and D.

NOTE: Clamp images in these instructions may

not be representative of the clamps in this kit

FittingKit

K530

Use keys to remove covers.

Use hex screwdriver to reverse adjusting

screw 10 turns.

Press adjusting screw and pull crossbar legs

out. Refer to the crossbar instructions for

crossbar adjustment.

Ensure each end of the crossbar is adjusted

equally.

FittingKit

K530

Remove locking screw.

Apply protective strip as shown.

Trim if required.

It is important to put the clamps in the correct

position on the vehicle.

Letters refer to the part numbers stamped on

clamps.

Clamp Part Number:

A = 849A

B = 850A

FittingKit

K530

Attach clamp to each leg. NOTE; clamps

may have labels showing their positions on

the vehicle (For example; "Front Right").

Refit locking screw so that it goes through

the hole in the clamp. Do not begin to tighten

the locking screw.

Fit rubber pad (supplied with crossbar) to foot.

FittingKit

K530

Make sure the pad fits into the holes

underneath the foot.

Fitment

Place crossbar on vehicle. Minimum

recommended spacing between the bars is

700mm (27 1/2") (unless otherwise stated).

Please check the rear of this manual for

information relating specifically to your

vehicle.

Clamps over body trim.

Press adjusting screw to adjust the leg

positions on the crossbar.

FittingKit

K530

Tighten adjusting screw to 5 Nm (3.7 ft lb).

Tighten locking screw on both legs evenly.

Check crossbar is securely attached to the

vehicle.

FittingKit

K530

Use keys to fit and lock covers

CAUTION: Recheck all fasteners immediately

after a load is applied to the crossbars.

Regularly check screws are tight.

FittingKit

K530

Clean the car roof and surfaces of the

product that will be in contact with the car

roof.

Follow the fitting instructions for fitting the

product to your vehicle. Make sure all steps

are carried out in order.

Set crossbars a minimum distance of 700mm

(27 1/2") apart where no other distance is

specified in the fitting instructions. This is

especially important when carrying long

loads.

Check unit is securely attached whenever

you refit it to the vehicle. If the unit feels

loose, refer to the fitting instructions and

readjust.

Some glass/panoramic roofs and radio

antennae may not be able to be used when

the product is fitted.

Do not modify this product.

Refer to the maximum permitted load

capacity specified in the fitting instructions.

Do not exceed the vehicle manufacturers

roof load rating if it is lower than the

maximum load capacity specified in the fitting

instructions.

Loads should not overhang the sides of the

product and be evenly distributed with the

lowest possible centre of gravity.

Long loads should be secured with non-

elastic straps to the front and rear of the

vehicle.

Objects with pointed ends (e.g. ski poles)

should be carried with the pointed ends to

the rear of the vehicle.

Remove all loose or removable objects from

the load prior to loading.

Make sure all loads are securely fastened

with non-elastic straps. Check regularly

during longer journeys.

Indice

Lingue:

Altri manuali Prorack Accessori per automobili

Prorack

Prorack K797 Manuale utente

Prorack

Prorack K1006 Manuale operativo e di installazione

Prorack

Prorack K596 Manuale utente

Prorack

Prorack K327 Manuale utente

Prorack

Prorack K163 Manuale utente

Prorack

Prorack K687 Manuale utente

Prorack

Prorack K1045 Manuale utente

Prorack

Prorack K512 Manuale utente

Prorack

Prorack Whispbar S43 Manuale utente

Prorack

Prorack K077 Manuale utente

Prorack

Prorack K1207 Manuale utente

Prorack

Prorack K751 Manuale utente

Prorack

Prorack K409 Manuale utente

Prorack

Prorack K046 Manuale utente

Prorack

Prorack K731 Manuale utente

Prorack

Prorack K673 Manuale utente

Prorack

Prorack 567 Manuale utente

Prorack

Prorack K802 Manuale utente

Prorack

Prorack K700 Manuale operativo e di installazione

Prorack

Prorack K1004 Manuale utente

Prorack

Prorack K828 Manuale utente

Prorack

Prorack K307 Manuale utente

Prorack

Prorack K570 Manuale utente

Prorack

Prorack K382 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente