Provision ISR ZP-20A-2(IR) Manuale utente

Package Contents:

Item ZP-20A-2(IR)

Qty.

ZP-20A-2(IR)

Wall Bracket

Hinge Pin

Rubber Seal

AC power supply

Wall Screws

PM8*25 socket head screws

Allan Key

Item ZE-20A-2(IR)

Qty.

ZE-20A-2(IR)

Wall Bracket

DC power supply

Wall Screws

PM8*25 socket head screws

Allan Key

 

Table of Contents: 
General Instructions:...................................................................3 
1 Safety Instructions: .......................................................................... 3 
2 Warnings: ......................................................................................... 3 
Features: ......................................................................................4 
1 Product Picture: ............................................................................... 4 
2 Product Features.............................................................................. 4 
3 Specifications: .................................................................................. 5 
Installation Site Preparations:.....................................................7 
1 Tool List: ........................................................................................... 7 
2 Installation Preparation:.................................................................. 7 
3 Output mode setting: ...................................................................... 6 
4 Product dimension:.......................................................................... 7 
Setup of the OSD Menu:..............................................................8 
1 Display Boot-UP Info.......................................................................... 8 
2 Enter the OSD Menu:....................................................................... 9 
3 SYSTEM Menu:............................................................................... 10 
5 Advanced Camera Menu: .............................................................. 18 
APPENDIX I Shortcuts Key Chart:.................................................21 
APPENDIX II Trouble Shooting: ....................................................21 

1 General Instructions:

1.1 Safety Instructions:

◆Make sure to read the user manual before using the camera.

◆Always follow national and local safety codes during the installation.

◆Only a qualified and experienced person can carry the installation and

maintenance for this camera.

◆Use reliable tools.

◆Make sure that the environmental conditions meet the installation

requirements for this product.

◆Please check the space and toughness of the installation surface before

installation. It should be able to bear 4 times the weight of the camera

and its accessories.

1.2 Warnings:

◆Do not install this speed dome in hazardous places where combustible

or explosive materials are stored or used.

◆Do not install on a platform that suffers from constant vibrations.

◆Make sure no object or fluid substances get inside the unit.

◆ZP-20A-2(IR) runs on AC24V and ZE-20A-2(IR) runs on DC12V. Do not

connect it to a different voltage.

◆Do not turn the power on before installation is complete.

◆Do not disassemble any part of the camera.

◆Use a soft towel to clean the down the lenses when necessary, do not

use caustic detergent.

◆To protect the image sensor, avoid facing the camera directly into a

strong light.

◆To prevent damage, do not drop the unit or expose to strong shocks or

vibrations.

◆Make sure no object is blocking the unit’s full range of motion.

2 Features:

2.1 Product Picture:

ZP-20A-2(IR) ZE-20A-2(IR)

2.2 Product Features (Items marked with * are only available in

ZP-20A-2(IR) Pro solution)

◆Alarm I/O: 1 Input/ 1 Output*

◆CoC Support

◆4 in 1 (AHD/TVI/CVI/CVBS)

◆Adaptive PELCO-P/D protocol.

◆Memory recall.

◆Real-Time-Control: call any functions at any time.

◆Support 255 preset positions.

◆English OSD menu.

◆Proportional zoom.

◆Auto flip function.

◆Built-in lightning proof and surge proof protection.

◆Advanced step motor for smoother movement.

◆Support Tour 4 groups, 8 Auto scan, 4 patterns, and 360°continuous

scan and 360° intermittent scan.

◆The upper dome adopts 7" aluminum alloy structure for better

magnetic shield and heat radiation.

◆The underpart dome adopts full metal class points bin type design for

fast heat dissipation and anti-mist, non-interference light source images

and long life span IR light.

◆Integral Junction box for easy installation*

2.3 Specifications:

Model

ZP-20A-2(IR)

ZE-20A-2(IR)

Sensor

1/2.8”CMOS

Resolution

2MP- 1920*1080

Optical Zoom

X20 (4.9-97MM)

Digital Zoom

Minimum Focus Distance

1.5M

Horizontal Angle of View

H:57 (Wide) to 4 (Tele)

V:33.5 (Wide) to 2 (Tele)

Sync System

Internal

Min. Illumination

0.01Lux (0 Lux with IR ON)

Day & Night

Auto/Manual/Night

S/N Ratio

>50db

Focus

Auto/Manual/One-Push

Auto Gain

Auto/Manual

Wide-D

Yes

White Balance

ATW/Manual/Outdoor/Indoor/AWB/AWC

BLC

On/Off

Shutter Speed

1/ 50 ~1 / 10000

Sense Up

Noise Reduction

3D-DNR

Flip

ON/OFF

Picture Freeze

Iris

Auto

Power Supply

AC24V±5%, 3A

DC12V, 2A

Sync system

Internal Sync

Language

English

Signal Output

4 in 1 AHD/TVI/CVI/CVBS + PAL/NTSC

IR Distance

100 IR LED Array

Pan Speed

0.01°~350°/s

(Max. Preset

Speed)

0.01°~60°/s (Max.

Preset Speed)

Tilt Speed

0.01°~120°/s

(Max. Preset

Speed)

0.01°~30°/s (Max.

Preset Speed)

Pan Range

0°～360°(Continuous)

Tilt Range

0°～90°（180° auto flip）

Presets

255

Preset Accuracy

<±0.1°

Tour

4Groups

Pattern

Auto-scan

Protocol

CoC / RS-485

Communication

CoC / PELCO-D/P

Baud Rate

2400bps、4800bps、9600bps

Address

1-255 (Software)

Work Temperature

-20 ℃+50℃

Work Humidity

<90%

Weight

3.25Kg

3. Installation Site Preparations:

3.1 Tool List:

(1) Screws* (2) Monkey wrench

(3) Philips screwdriver (4) Straight Screwdriver

(5) Wire stripper (6) Socket head wrench

(7) Electric drill (8) Hammer

(9) BNC connector (10) BNC Clamp

*Included in the kit

3.2 Installation Preparation:

(1) Check the space and toughness of the site and make sure that the

environmental conditions meet the installation requirements for this product.

(2) The installation surface should be able to bear 4 times the weight of the

PTZ and its accessories.

3.3 Output Mode Setting:

(1) Default Settings: AHD, PAL system

This output can be changed via the controller (Even if the user cannot gain a

video output from the unit due to output incompatibility)

(2) Set your controller/DVR PTZ Settings to the Camera’s Default

Communication Settings: Protocol: CoC / PELCO-D, address: 1 (Unless user

changed it by the DIP switch configuration), baud rate: 2400.

(3) In order to change the output type follow the instructions below:

AHD/TVI/CVBS Command

Set #85 preset,

Please note: you will have to use “Save

Position” or delete and recreate the

preset if you need to use it more than

once –AS it is “set” action.

Call the preset number of

the desired video type

signal:

e.g. “14” for CVBS/NTSC

N=1

AHD

N=2

TVI

N=3

CVI

N=4

CVBS

CVI Command

Set #50 preset,

Please note: you will have to use “Save

Position” or delete and recreate the

preset if you need to use it more than

once –AS it is “set” action.

Call the preset number of

the desired video type

signal:

e.g. “14” for CVBS/NTSC

N=1

AHD

N=2

TVI

N=3

CVI

N=4

CVBS

3.4Product dimension:

4. Setup of the OSD Menu:

4.1 Display Boot-UP Info.

Before installation please check the protocol, baud rate, address, and RS485

data cable. Default Settings: Protocol: PELCO-D, address: 1, baud rate: 2400.

4.2 Enter the OSD Menu:

While the camera is in standby condition, call preset 95 (“Call” + 95 + “Enter”)

in order to display the main menu. Use the Up/Down direction to select the

item or start the configuration. Use the Right key to confirm and left the key

to exit the current setting.

The Main menu as follows:

INFORMATION

DOME SETTINGS

MOTION

RESTART

FACTORY DEFAULTS

EXIT

VERSION: VR210P-306

SIGNAL:AHD PAL

PROTOCOL: PELCO P D

BAUD RATE: 2400

CAMERA ID: 001

TEMP: 36

STATUS:OK

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Provision ISR Telecamera di sicurezza

Provision ISR

Provision ISR Light Cruiser LC-10 Manuale utente

Provision ISR

Provision ISR ISR BOX CAMERA Manuale utente

Provision ISR

Provision ISR PRO-AHD series Manuale utente

Provision ISR

Provision ISR DI-380IPVF Manuale utente

Provision ISR

Provision ISR UltraVision Series Manuale utente

Provision ISR

Provision ISR I5PT-390AHDX4 Manuale utente

Provision ISR

Provision ISR Z-22IR Manuale utente

Provision ISR

Provision ISR Ultra-Z-18s Manuale utente

Provision ISR

Provision ISR I1-380AHDB36 Manuale utente

Provision ISR

Provision ISR Ultra-Z IP series Manuale utente

Provision ISR

Provision ISR Ultra-Z Z-20AHD-1(IR) Manuale utente

Provision ISR

Provision ISR 1080P Pro-AHD Series Manuale utente

Provision ISR

Provision ISR DAIPT-390AX4 Manuale utente

Provision ISR

Provision ISR I2-320A-28 Manuale utente

Provision ISR

Provision ISR PT-737 Manuale utente

Provision ISR

Provision ISR MN-322CS43 Manuale utente

Provision ISR

Provision ISR 5MP 4 in 1 Series Manuale utente

Provision ISR

Provision ISR DAI-390IPVF Manuale utente

Provision ISR

Provision ISR Mini Ultra-Z Z-10AHD-1 (IR) PTZ Manuale utente

Provision ISR

Provision ISR DAI-390IP04 Manuale utente

Provision ISR

Provision ISR I1-325CS Manuale utente

Provision ISR

Provision ISR I5PT-320IPMX10-P Manuale utente

Provision ISR

Provision ISR DA-352CS DA-322CS Manuale utente

Provision ISR

Provision ISR I3-380IP04 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente