Functional Description
1. Parking mode is Off by default (factory setting).
To turn it on, please enter menu selection first then turn it on from there.
Parking Mode:
After the camcorder is being turned off, it still can use its built-in battery and
G-Sensor to detect outside impact to the car. When impact is happened, if the
force of the impact reached the G value being setup by you, the camcorder will
turn on and record for a period, then turn off itself.
Application:
When parking on the road side, if your car happened to be hit, our camcorder
will turn on and record. This recording will record video/sound at that moment
for you.
Precaution:
1) If your car’s charger continue charging even after the engine is turn off,
then we suggest you to unplug the camcorder’s charging cable from the
car charger to avoid power consuming.
2) How to determine your car’s charger is power consuming or not: After the
engine is turned off, please check to see if camcorder’s power LED
(GREEN) is ON? If it is ON, then your car charger continue consumes
power after the engine is off.
2. Auto/Manual Lock File Function. (Lock file’s time definition please refer to next
page, in Loop Recording Setup Section)
Definition: While driving, bumping car will start auto lock file function, which
can avoid this video to be overwritten by the following recording.
If Auto Lock is not ON, you can still manually lock the current video and save it
from being overwritten.
Note:
1) When the car bumping is too slight for the Auto Lock File to turn on itself,
you can always using manual Lock File button to lock your file. (this
button is located on the left of the Screen)
2) During emergency, whenever you need to save your file, you can use
Manual Lock File function to save this file.
3) In order to save locked files, system will use 2G space from your SD card
