Pxmalion Core I3 Manuale utente
Pxmalion Core I3
Operation Instructions
ⅠContents
1. The information screen
2. Go to home position
3. Load / unload filament
4. Adjust print parameters
(1) Nozzle temperature
(2) Bed temperature
(3) Cooler fan speed
(4) Printing speed
(5) Pre-heat
(6) Cool down
5. Control of Motions
(1) Move the nozzle / platform along X/Y/Z
(2) Lock / Unlock stepper motors
6. Print an object
7. Adjust Z motion smoothness
ⅡThe information screen
1. Information available in this screen:
①Please check the pictures below for explanations of the displayed information and the control
knob.
②Control knob: Turn it to select and click to enter.
Control knob
Nozzle temperature: actual / set
Bed temperature: actual / set
Time spent: hours / minutes
Status of printer
Percentage of the
finished
Print speed
Current X, Y, Z positions
Click to enter the info screen
Click to enter the previous menu
ⅢGo to home positions
1. Go to home positions: send all X, Y, Z to home positions.
(X: 0 Y: 0 Z: 0)
2. Home position: X: 0 --- Nozzle is at the leftmost position
Y: 0 --- Platform is at the farthest position
Z: 0 --- Nozzle is at the lowest position
3. Reasons to send to home positions:
①Need to do so before leveling the bed.
②Return nozzle and bed to origin.
4. Operation sequence:
Info screen --"Prepare"-- "Auto home"
Illustration
ⅣLoad / Unload filament
1. Load filament: To feed filament into extruder and nozzle.
Unload filament: To retreat filament from extruder and nozzle.
2. Operation sequence:
Info screen -- "Prepare" -- "Change filament" --"Load filament/Unload filament"
Illustration
Nozzle temperature / set temperature:
load / unload filament cannot start until
nozzle temperature reaches the set
value.
ⅤAdjust print parameters
1. Parameters:
①Nozzle temperature
②Bed temperature
③Fan speed
④Print speed
⑤Preheat: for PLA: Nozzle 190°C bed 40°C
⑥Cool down: All heating stop.
2. Operation sequence:
(1) Nozzle temperature, bed temperature, cooling fan:
Info screen --"Control"-- "Temperature" --"Nozzle/Bed/Fan speed"
(2) Print speed:
Info screen -- "Control" -- "Print settings" -- "Print speed"
Illustration
You can adjust the
set temperature by
turning the knob.
Unload / load can be
done now when
heating is finished.
Click to stop the
operation.
(3) Pre-heat:
Info screen -- "Prepare" -- "Preheat PLA" -- "Preheat PLA/Preheat PLA Bed"
(4) Cool down:
Info screen -- "Prepare" -- "Cool down"
Illustration
Click on one then turn
the knob to adjust the
fan speed.
Turn the knob to adjust
print speed.
Cool down
ⅥControl of Motions
1. What can be controlled?
①Motions along X, Y, Z, E
②Disable stepper motor: can unlock the motors to move muzzle and platform freely by hands.
2. Attention: E motion indicates the extruder motor, to move it the nozzle temperature must be
over 175°C.
3. Operation sequence:
1) Move X, Y, Z:
Info screen -- "Prepare" -- "Move axis" -- "Move 10mm/Move 1mm"
-- "Move X/Move Y/Move Z/Move E" --
2) Disable stepper motors:
Info screen -- "Prepare" -- "Disable steppers"
Illustration
190°is set automatically for
nozzle temperature.
40°C is set automatically for
bed temperature.
ⅦPrint an object
1. Required knowledge:
①Check for the presence of SD card
②Operations to print
2. Operation sequence:
1) To print an object
Info screen -- "Print from SD" -- "select a G-CODE file"
Illustration
Turn the knob to
define a location.
Disable stepper motor.
SD card
inserted
SD card not
inserted
Click to select a
file.
ⅧAdjust Z motion smoothness
1. Purpose:
①To adjust Z motion mechanisms in order to get smoother motion
2. Reasons:
To set the parallelism between the 2 screw rods and the 2 guiding pins for Z motion. Horizontal
waves appearing on printed objects can be improved by doing so.
This function will result in 3 full nozzle circles up and down; we recommend repeating the
operation more than once for better result.
3. Attention: Those 6 screws to fix Z motion parts must be loosened before using the function,
please watch our instruction video for how to loosen the screws
4. Operation sequence:
1) Info screen -- "Prepare" -- "Adjust-Z axis"
Illustration
Altri manuali per Core I3
1
Indice
Altri manuali Pxmalion Stampante 3D
