Q-See QR208--811 Manuale utente

Quick Installation Guide

8 Channel H.264 Compression DVR with

(CIF) Real-Time Recording and

8 Color CMOS Camera Kits

-8

Q-SEE QUICK INSTALLATION GUIDE

-8

1 | Page

Remote

Control

USB 2.0

Mouse

Ethernet

Cable

BNC (M) - RCA (F)

Adapters

(2 Included)

Camera Cables

(8 Included)

Power Supply &

8 -Way Splitter

For Cameras

Pre-Installed

Hard Drive

8 Cameras

(4) QSM1424C (6mm Lens)

(4) QSM1424W (3.6mm Lens)

Software

User’s

Manual

Power Supply

For DVR

QSDR008RTC

DVR

PART 1 - PACKAGE CONTENTS:

Q-SEE QUICK INSTALLATION GUIDE

-8

2 | Page

PART 2 - DVR CAMERA AND POWER CONNECTIONS

(Figure 1)

1. Connect one end of the 60 Ft. extension cables to the cables that are connected to the cameras.

2. Connect the other end of the 60 Ft. extension cable to the DVR as illustrated in Figure 1.

3. Following the illustration in Figure 1, plug the power connecter of the 60 Ft. extension cable to the 8

way splitter. Repeat steps 1 through 3 for each camera.

4. Plug the end of the camera power adapter into the 8 way splitter.

5. Plug the power adapter into the surge protector. Repeat steps 1-4 until all cameras are connected to

a power adapter.

6. Plug the power adapter for the DVR into the back of the DVR as illustrated in Figure 1.

7. Plug the power chord of the power adapter into the surge protector.

8. Plug the surge protector in to an electricity outlet.

Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated.

Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of

10 nanoseconds or less.

Q-SEE QUICK INSTALLATION GUIDE

-8

3 | Page

PART 3 - CONNECTING THE DVR TO YOUR TV

1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR.

2. Connect the other end of the RCA cable (not included) to the Video Input on the TV if you are using a

television screen.

3. If you are using a PC monitor, plug the VGA cable (not included) to the VGA port on the DVR.

4. Connect the other end of the VGA cable to the monitor.

PART 4 - DVR CONTROLS: FRONT PANEL

1. Rewind 7. Menu/Escape 13. CH-

2. Pause 8. PTZ Mode 14. CH+

3. Play 9. Select/Edit 15. View All Screens

4. Fast Forward 10. Direction Keys 16. Indicator Lights

5. Stop 11. Search 17. Infra Red Receiver

6. Record 12. Mute

Q-SEE QUICK INSTALLATION GUIDE

-8

4 | Page

PART 5 - ACCESSING THE DVR MENUS

PART 6 - SETTING UP CAMERAS FOR VIEWING AND RECORDING

PART 7 - TO START RECORDING

Using higher resolution and quality settings results in better video quality, but takes up more space on the hard drive.

Choosing lower settings result in lower video quality, but takes up less space on the hard drive.

AUDIO: If audio is ENABLED sound will be recorded with the video from the channels, and will have audio output in

playback mode. If audio is DISABLED, sound will not record, and there will be no audio output in playback mode (Audio

cameras or a microphone is required to record the sound).

REC MODE: Sets DVR to record on Manual, Motion Detection & Time Schedule Recording (instructions below).

PACK TIME: Choose the time length of all recorded files: 15, 30, 45, 60 min. (Max = 60 min).

Choose MENU by right clicking on the mouse or by pushing the MENU

button on the DVR front panel or remote control.

The Main Menu offers the following Setup Features:

CAMERA: Setup name display, position, image view, and record quality of

each channel (cameras).

RECORD: Enable recording & audio, set resolution & quality, recording mode

and file size.

NETWORK: Setup Network access (Remote Internet Monitoring).

SEARCH: Find files for playback and backup.

DEVICES: Manage & Format hard drive and USB devices, setup alarms, PTZ

cameras, mobile phone access and motion detection.

SYSTEM: Setup time, date, password, and video mode.

From the Main menu, select CAMERA. Here you can setup the name display

(up to 8 characters) and position of each channel (cameras). Select COLOR

SETUP to adjust the image brightness, saturation, contrast and hue settings for

each channel (camera). You can also choose whether each channel can be

previewed in LIVE MODE and/or RECORDING MODE.

This System offers 3 modes for recording:

1. Manual 2. Time Schedule 3. Motion Detection.

From the main menu, select RECORD to enter into the Record Setup

menu (shown at right).

CHANNEL: “ON” enables video to record

from the respective camera. If

the channel is set to “OFF”, video from that channel will not record.

RESOLUTION: D1=704x480, HD1=704x240, CIF=352x240

QUALITY: Best, Good, Normal

Q-SEE QUICK INSTALLATION GUIDE

-8

5 | Page

Time Schedule Recording:

From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will

display the Schedule menu (see below image). Select the channels (cameras) that you wish to record on a schedule. The

options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the

unselected channels will be “Grey. Click on the green GENERAL option box then click on the boxes for the days and times

that you want to record using this option on the timeline. You can use the [From – To] pull-down menus and COPY

button to copy settings from one day to another day, or all days. Your DVR will record on it’s Time Schedule, and

separate files with the Pack Time Interval you selected. Click APPLY to activate your customized schedule, and then

reboot the DVR.

You can also click on the DEFAULT button to use the system defaults. The system default settings are:

Hr 01:00 am-07:59 am : No recording

Hr 08:00 am-18:59 pm : General recording (Time Schedule)

Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection)

Manual Recording:

From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be

created with the Pack Time intervals you selected.

Motion Detection Recording:

From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will

display the Schedule menu (See picture above). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel

you select will be highlighted in “Blue”, and the unselected channels will be “Grey. Click on the red ALARM option box then

click on the boxes for the days and times that you want to record using this option on the timeline. You can use the [From –

To] pull-down menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on

Motion Detection, and separate files with the Pack Time Interval you selected. Click APPLY to activate your customized

schedule, and then go to the Devices option (red box in first below picture) and select the Motion Option (red box in

second picture below), which will display the Motion Detect Box.

Grid Explanation for Scheduled Recording:

Red = Alarm (motion detection) recording

Green = General (time schedule) recording

Transparent = No recording

Blue = The channel and date selected.

Q-SEE QUICK INSTALLATION GUIDE

-8

6 | Page

The Motion detection Menu has three sections, including

Channel Status, Sensitivity and Motion area.

STATUS: This option allows you enable motion detection on

any channel.

SENSITIVITY:This option allows you to set sensitivity level

of motion detection from 1 to 4, with 4 being the highest.

Next, click on the MD AREA SETUP button, which will display the picture on

the left. This option allows you to select the area you want to be sensitive

to motion. The area in red is sensitive to motion. You can set this area by

using the mouse or REV, FWD, and SEL keys on the front panel. Once you

have set the area, right click with the mouse or push the ESC key to save

the setting. After you have set all of the cameras, click on the Apply button

to save the settings.

PART 8 - SETTING UP THE DVR TO PLAYBACK

Searched Playback:

From the Main Menu select SEARCH to display the Video Search

Menu shown to the right. If you input a specific date and click

Search, you will find all the recordings for that day. When you

select an item, you will playback the recordings in 4 channel mode;

or, click [File list] button to display File list interface, where you

can playback or backup the file you selected. See File List heading

below.

In the playback window you can play video Forward at 2x, 4x, and

8x speeds, Slow play at 1/2x, 1/4x, and 1/8x, or normal play, pause

and play frame by frame using the playback control bar, and adjust

volume by clicking or sliding tune control bar. When playback has

finished, system will return to previous menu.

File List:

On the Video search menu mode, click File list to display the sub-

menu shown in the picture on the left.

This option will allow you to view all of the available files by channel

and type (all, normal, or alarm).

You can select a file and push the SEL button to playback the file, or

use the FWD button and down button to select the backup option and

backup the recorded file you selected. You can also put a checkmark

in the BAK box at the end of multiple files if you want to backup more

than one file. See section 5.2.4 Search Recordings in the User Manual

for more information on using the File List option.

Q-SEE QUICK INSTALLATION GUIDE

-8

7 | Page

PART 9 - BACKING UP THE VIDEO ON THE DVR

Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 8 to go to the File List

in the Search menu.

If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the file you

wish to back up by placing a check mark in the accompanying green box and hit the [BACKUP] button on the right of the

screen. You will then receive a pop up screen as illustrated in Picture 22 showing you the progression of your backup. Once

backup is complete, you will then receive a pop up message informing you that you have backed up your files successfully (see

picture below). Note that all files will be in an H264 format that can be converted to AVI using the Multi Player program that

comes with the DVR or through the net-viewer program. Once converted, you can then view these files through any program

that supports an AVI format.

Q-SEE QUICK INSTALLATION GUIDE

-8

8 | Page

Questions or Comments?

Mailing Address: Customer Service:

DPS, Inc. Phone: 877-998-3440 x 538

8015 E. Crystal Dr. Email: cs@dpsi-usa.com

Anaheim, CA 92807 Live Chat from our Website

Website: Tech Support:

http://www.q-see.com Phone: 877-998-3440 x 539

Fax: Email: ts@dpsi-usa.com

714-998-3509 Live Chat from our Website

REVISED3/16/2010

Indice

Altri manuali Q-See Sistema di sicurezza

Q-See

Q-See Presidio Series Manuale utente

Q-See

Q-See QT428-811 Manuale utente

Q-See

Q-See QSDS14273X Manuale utente

Q-See

Q-See QC804-261-1 NVR Manuale utente

Q-See

Q-See QSDR744KRTS Manuale utente

Q-See

Q-See QS SERIES Manuale utente

Q-See

Q-See QT4760-16A6-5 Manuale utente

Q-See

Q-See QD113P Manuale utente

Q-See

Q-See qr404-411 Manuale utente

Q-See

Q-See QR4174-418 Manuale utente

Q-See

Q-See QSW25C Manuale utente

Q-See

Q-See QH50DVR8C Manuale utente

Q-See

Q-See QC5416 Manuale utente

Q-See

Q-See QC40198 Manuale utente

Q-See

Q-See QSD6209C9--250 Manuale utente

Q-See

Q-See QC40198 Manuale utente

Q-See

Q-See QT17D324SC Manuale utente

Q-See

Q-See QS458-811-5 Manuale utente

Q-See

Q-See QSD004C4-250 Manuale utente

Q-See

Q-See QC9416-16V2 Manuale utente

Q-See

Q-See QSD2304C4-250 Manuale utente

Q-See

Q-See QC308 Manuale utente

Q-See

Q-See QR424-403 Manuale utente

Q-See

Q-See QR4174-411 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente