Rac 225 S Manuale utente
RAC 225 S Super
HD Dash Cam with
GPS and Speed
Camera Alerts
Designed and tested by experts
INSTRUCTION MANUAL
Congratulations on
choosing the Forward
FacingRAC 225 S
Super HD Dash Cam
with GPS and Speed
Camera Alert Function.
Please read these
instructions carefully
before use.
Contents
Product Features P01
Unpacking P01
Identification of Controls P02
Preparing for Use P03
Installing the Dash Cam P04
Connecting to Power P04
Powering the Dash Cam On / Off P05
Set the Date / Time P06
Mode Selection P06
Using the Dash Cam P06
Recording Screen P07
Emergency File Protection P07
Motion Detection P08
G-sensor Collision Recording
Audio on/offP09
Menu Operation P09
General Settings Menu Options P10
Menu Settings Mode P11
Menu Settings Mode P12
Menu Settings Mode P13
Taking Pictures P14
Still Capture Screen P14
GPS Function
P18
GPS Icon Indication
P19
GPS Tracking Logger
P19
Battery Warning and
Installation Notes
P20
Caution
P21
Warranty
P21
Specification
P22
P09
Zoom in / out P14
Playing Back Videos and Photos P15
Playing Back Videos and Photos P15
Playback Menu Options P16
Protection (Protect Level)
Screen
Playback Menu Options P17
Product Features
›Super HD 1296p Dash Cam - records what happens on the road ahead
›3 Megapixel CMOS Sensor
›3.0” TFT Display - with screen saver function to avoid distractions whilst driving
›130˚ Wide Angle F1.8 6G Lens
›Supports up to 32GB Class10 Micro SD Card
›G-sensor Collision Recording Protection
›Motion Detection
›Seamless Loop Recording
Unpacking
Unpack the contents of the box and ensure the following components are present.
›RAC 225 S Dash Cam
›Car Charger
›Class 10 Micro SD Card ( pre-installed into the RAC 225 S )
›GPS Mount
›3M Windscreen Mount
›
SD Card Reader
›
Window Sticker
›
Quick Start Guide
01
RAC 225 S Super HD Dash Cam
Built in GPS function records speed and location
›
Built in Speed Camera Alerts to notify the driver of upcoming speed and safety cameras
by way of an audio and visual alert, advising the distance to the speed camera, the speed
camera type and the current speed limit and the current speed of the vehicle
›
Identification of Controls
Controls:
1.
USB Port for GPS Mount
2.
Lens
3.
LCD
4. SD Card Slot
5.
Up Button
6. Menu Button
8.
OK Button
9.
Mode Button
10.
Lock Button
11.
Power Button
12.
Microphone
www.proofcam.com
02
Down Button7.
Reset13.
GPS Unit
14.
15
3M Windscreen Mount
15.
Preparing for Use
Battery Indicator and Charging
Inserting the Micro SD Card (included)
Follow the direction indicated on the Dash Cam to insert the Micro SD card, a click sound is
heard indicating the card is in position.
NOTE: For first use, the Micro SD card is pre installed.
To remove the Micro SD card, push to eject the Micro SD card out of the slot.
NOTE :
1.
Do not remove or insert the Micro SD card when the Dash Cam is turned on. This may
damage the Micro SD card.
2.
Please use a minimum Class 10 or higher rating Micro SD card, maximum up to 32 GB.
3.
Please format the micro SD card before the first use (see instructions in this Manual).
4.
When removing the Micro SD card, be careful that the card may spring out and get lost.
The Micro SD slot has this spring-out feature for easy removal of the card.
Micro SD Card slot
03
RAC 225 S Super HD Dash Cam
Installing the Dash Cam
1. Insert the GPS mount into the 3M windscreen mount, the GPS cable goes through the
hole of the 3M windscreen mount.
2. Screw the GPS mount into the top of the Dash Cam, and tighten the screw to make sure the
GPS mount is securely locked in place.
4.
Tear off the sticker from the 3M windscreen mount, and position the 3M windscreen
mount onto the windscreen.
Note: The 3M mount is hard to move, so please make sure that the windscreen mount
is in the correct location and position prior to fixing onto the windscreen.
Connecting to Power
Use only the supplied car charger for powering the Dash Cam.
1.
Connect one end of the car charger to the USB port on the GPS mount.
2.
Plug the other end of the car charger to the in car power socket of your vehicle. Once
the vehicle engine is started, the Dash Cam automatically turns on. It will also turn off
when the engine is turned off. (
Note: Some vehicles have an in car power supply that
remains on, even if the engine is turned off. If this is the case, you will need to manually
turn the Dash Cam on and off, using the power button, when you enter and leave the
vehicle).
www.proofcam.com
04
Note:
Any excess cable can normally be tucked into the ceiling of the vehicle. We have a
video to advise on how best to fit the RAC 225 S which is available at
www.proofcam.com and visit “ Dash Cam Resources”. You can also search “ How
to fit a 225 S” on YouTube - please visit the ProofCam channel on You Tube for a
number of helpful videos.
3. Insert the GPS cable from the 3M windscreen mount into the RAC 225 S.
5. Rotate the Dash Cam 360° to secure the desired view
Powering the Dash Cam On / Off
Auto Power On / Off
Once the vehicle engine is started, the Dash Cam automatically turns on and starts recording
( must have the Micro SD Card installed). After the car engine is stopped, the Dash Cam will
automatically save the last recorded file and shutdown.
Manual Power On / Off and Reset
Manual Power On / Off
Short press the Power button 1 second to power the Dash Cam on and off.
Reset the Dash Cam
In case the Dash Cam fails to function normally due to unknown causes, press the Reset
05
RAC 225 S Super HD Dash Cam
NOTE: If your vehicle in car power remains on after the car engine has been turned off, you
may need to remove the power lead, or turn the RAC 225 S off using the power button. This is
because if the in car power remains on, the RAC 225 S will not know that the engine has
turned off.
Please MUST insert the GPS cable into the Dash Cam first and then insert the car
charger into the GPS mount. Otherwise it will not open the dash cam every time.
button with sharp pin, then wait for restarting the dash cam. Sometimes it is also necessary
to format the Micro SD Card, which can be performed from the menu settings.
Power Button
Reset Button
Set the Date / Time
The time and date will automatically update after the Dash Cam has recevied
a GPS signal. The letters GPS in the top left of the screen will turn from red to
green once a GPS signal has been acquired. You may need to adjust the time
zone settings in the menu if the displayed time is not correct.
Mode Selection
Using the Dash Cam
Recording Videos
www.proofcam.com
06
Auto Update
Manual Update
Press OK button to stop recording;
Press Menu button to enter menu settings;
Press the Up / Down buttons to select Clock Settings;
Press OK button to enter the Clock settings;
Press Up / Down buttons to change values, then when complete, press
OK button to return to the menu settings;
Press Menu button until the Dash Cam exits the menu function and
returns to the Home screen;
Press OK button to resume recording.
The defualt setting is Video Mode. Press MODE button one time to switch to
Still Capture Mode, twice to Playback Mode. In Playback Mode, press UP and
DOWN buttons to switch to VIDEO (normal video), EVENT ( any lock video during
recording), PHOTO (pictures). Press LOCK button to switch to Rear camera
Playback Mode.
Before starting to record, please ensure that the Micro SD card (included) is
inserted. If you are using the Dash Cam for the first time, it will be pre installed
in the slot. Please format your SD card in Dash Cam before using. Please adjust
the Time Zone according to your location and seasons at MENU settings. Press
OK button to start recording, the video recording icon flashes on the screen.
The recorded files are saved to the Micro SD card. To stop recording, press OK
button again. With the car charger connected the Dash Cam will automatically
turn on and start recording when the car engine starts. When the engine stops,
the Dash Cam will automatically save the last file and turn off.
•
Emergency File Protection
The RAC 225 S records in segments onto the Micro SD card. The default segment
duration is 3 minutes, which can be changed from the menu settings. For example,
1 hour of recording would generate 20 x 3 minute segments.
During recording, press Lock button to protect the current video, the lock icon
appears on the screen, the current video clip will be protected and cannot be
replaced.
Recording Screen
07
RAC 225 S Super HD Dash Cam
The protective video can be seen the lock icon in the EVENT file of dash cam
playback mode, and the file name will be changed to “EMERXXXXXX-XXXXXXF.MOV”.
NOTE:
Recording
status
Current video clip recording time
Resolution
Protect video icon
GPS Status
Systems
date
Systems
time
Exposure bias
value
Battery status
Remove the protection for the video:
Press OK button to stop recording, then press MODE button twice switch to Playback
Mode, press UP or DOWN buttons to choose EVENT file, then press OK button to
enter Emergency file, and then press UP and DOWN buttons to select the protection
video and then press MENU button to enter Playback menu, press UP and DOWN
buttons to select “Protect” menu, press OK button to enter to choose “Unprotect One”
or “ Unprotect All”, press OK button to confirm unprotect current video or all the
protected videos, the lock icon will disappear from the screen. The video will not be
protected and can be replaced if the Micro SD card is full.
The manual unprotected videos can’t change the file name and move to the
Video file automatically.
Indice
Altri manuali Rac Telecamera da cruscotto
