Radicom Research RB8762C Series Manuale utente
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 2
Table of Contents
Radicom Research, Inc. ............................................................................................... 1
Table of Contents ..................................................................................................... 2
RB8762C EVK and BLE Functionality .................................................................... 4
Features .................................................................................................................... 5
Approvals ................................................................................................................. 6
Electronic Characteristics ....................................................................................... 6
Model Naming System ............................................................................................. 7
RB8762C Module Mechanical Dimensions & Pin Definitions ............................... 8
RB8762CHM Mechanical Dimensions & Pin Definitions ...................................... 9
RB8762CMB Mechanical Dimensions .................................................................. 10
RB8762CMB RS232 DB9 Pin Definitions ............................................................. 11
Layout Design Suggestions .................................................................................. 12
RB8762C EVK Development Board Figure and Functions ................................. 13
Operating RB8762C MB ......................................................................................... 15
Supported AT Command List ................................................................................ 18
AT-Command in Docklight .................................................................................... 20
OTA Upgrade Firmware ......................................................................................... 22
How to access RB8762C from smartphone ......................................................... 26
The wired method upgrades RB8762C firmware code ....................................... 28
FCC , IC, NCC Label and Model Identification ..................................................... 34
Important Regulatory Compliance and User Information .................................. 34
CE Declaration of Conformity ............................................................................... 40
Limited Warranty .................................................................................................... 41
Contacting Radicom Research ............................................................................. 43
Information furnished by Radicom Research is believed to be accurate and reliable. However Radicom
Research assumes no responsibility for its use, or any infringement of patents or other rights of third
parties that may result from its use. Radicom Research reserves the right to change circuitry at any
time without notice. This document is subject to change without notice.
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 3
Introduction
Thank you for choosing Radicom RB8762C Module. We are committed to providing you quality
service and technical support. The RB8762C modules are designed to meet OEM’s needs of
embedding low power, wireless data connectivity to their products. The RB8762C family offers a quick
and simple solution for wireless Bluetooth communications.
Radicom RB8762C module is designed to meet the emerging market for Bluetooth 5.1 applications.
These embedded Bluetooth 5.1 modules integrate entire profiles, applications, and Bluetooth
protocol stack, and no external processor is needed. It also contains 256KB flash memory and 80KB
RAM.
The RB8762C can be factory configured for other Bluetooth cost-effective and power-efficient
wireless consumer products such as watches, medical sensors, mice, TV remote controls and fitness
trainers. Contact Radicom for help to add the BLE Data Protocol functionality to your 5.1 Bluetooth
device or for help in determining which Bluetooth Module is the best fit for your particular Bluetooth
application.
The RB8762C family modules can be powered with standard 1.8V~3.6V low power. In lowest mode
it consumes only 1.1 nA level power and will wake up in few hundred microseconds. The RB8762C
family provides superior performance in the presence of interference from 802.11 (WiFi) wireless
devices and other 2.4GHz radios.
The RB8762C modules support quick connections and data transfers allowing an application to
establish a Bluetooth connection within a few milliseconds for short communication bursts before
quickly disconnecting the Bluetooth connection to save power. It takes much less time to make a
connection than conventional Bluetooth wireless technology and consumes approximately only 1/20th
of the power of Bluetooth Basic Rate.
The RB8762C is available in surface mount (SMD) or through-hole (DIP) hardware designs. The
RB8762C module is the surface mount model. The RB8762C can also mounted on a conversion
board to create the RB8762CHM model for serial through-hole designs.
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 4
RB8762C EVK and BLE Functionality
Radicom provides RB8762C-EVK (development kits) as a quick platform for testing and evaluating
the RB8762C and RB8762CHM Bluetooth modules. The kit includes two RB8762C modules
mounted on the RB8762CHM DIP Module. Each RB8762CHM is installed into a RB8762CMB
evaluation board. One of the RB8762CHM is configured to operate in BLE Data Protocol Master
Mode. The other RB8762C-HM is configured to operate in BLE Data Protocol Slave mode. The
RB8762CMB boards have an RS232 Serial Port connector and USB interface that allows the user to
immediately connect to any standard serial port to evaluate the Bluetooth modules.
The RB8762C modules are defaulted to use the BLE Data Protocol. For BLE Data Protocol operation,
you need one Radicom Master and one Radicom Slave module. The Slave Model RB8762C-S
advertises or broadcasts the Bluetooth signal. The Master Model RB8762C-M will scan for Bluetooth
signals and then request a Bluetooth connection. The RB8762C-S Slave can then accept the
connection for BLE Data transfers. The RB8762C-S Slave can also operate with remote devices that
also support the BLE Data Protocol.
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 5
Features
Support the Bluetooth 5.1 core specification
Frequency Range 2.402 – 2.480 GHz
Integrate MCU to execute Bluetooth protocol stack
Ultra low power consumption with intelligent PMU
Supports Master and Slave modes
Support fully multiple Low Energy states
Support LE L2CAP Connection Oriented Channel Support
Support LE low duty directed advertising
Support LE data length extension feature
Integrated Bluetooth low energy stack including ATT, GATT, SMP, L2CAP, GAP
Generic Applications for GAP Central, Peripheral, Observer and Broadcaster Roles
Support OTA (Over-the-Air) programming
Firmware upgradeable through serial port
Support internal 32KHz OSC or external 32KHz clock input for low power mode
Low power 3.3V operation
TX Power: 4.0 dBm Max ~ RX Sensitivity: -92.5dBm Min
Range: Up to 20 meters (line of sight)
15 GPIOs, 3 configurable LED pins
Hardware Keyscan and Quad-decoder
Embedded 256KB flash
Embedded IR transceiver
Embedded 8-CH 12-bit ADC
Embedded G-sensor
Support AES128/192/256 encrypt/decrypt engine
Serial Interface ( SPI / I2C / PWM)
Support 3wire/2wire SPI
Wake-up interrupt
Watch Dog Timer
Small sizes:RB8762C ~ 0.67” x 0.59”
RB8762CHM ~ 0.67” x 1.09”
On-board microprocessor, RAM and ROM
On-board antenna or on-board U.FL connector for external antenna
0°C to +70°C temperature operating
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 6
Approvals
FCC Certification
47 CFR FCC Part 15.247 & ANSI C63.10 2013 KDB 558074 D01 v03r05
FCC 1.1310
CE Certification
EN 300 328 V2.1.1
ETSI EN 301 489‐17 V2.2.1 / ETSI EN 301 489‐1 V1.9.2
EN 61000‐3‐2: 2014 / EN 61000‐3‐3: 2013
EN 55032: 2015 / EN 55024: 2010+A1: 2015
ETSI EN 301 489‐17 V2.2.1
ETSI EN 301 489‐1 V1.9.2
EN 61000‐3‐2: 2014
EN 61000‐3‐3: 2013
EN 55032: 2015
EN 55024: 2010+A1: 2015
IC Certified
RoHS Compliant
Electronic Characteristics
Minimum Typical Maximum Unit
Operation voltage 2.35 3.3 3.6 V
Output Power 4.0 dBm
Sensitivity -92.5 dBm
Current Consumption *
Pairing mode 4.4 mA
RX active 6.9 mA
※The Current Consumption is code dependent. Bluetooth functions and characteristics will
vary depending on the application firmware that is loaded into the RB8762C module. The
standard code is for BLE Slave. Using any RB8762C I/O (output) will draw more current
and change the overall current consumption.
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 7
Model Naming System
Product Series: RB8762C- (x) - (x)
Optional
a: on-board antenna
c: IPEX connector
Optional
G: with G sensor
Blank: without G sensor
FCC/CE certified:
RB8762C-(a/c)-G
RB8762C-(a/c)
IC certified:
RB8762C
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 8
Size:
Module=17.5x15.0x2.75mm[0.69”x0.59”x0.11”]
RB8762C Module Mechanical Dimensions & Pin
Definitions
Pin Definitions
Unit:mm[inch]
FrontView
Top View
SideView
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 9
RB8762CHM Mechanical Dimensions & Pin Definitions
Size:
RB8762CHM(w/o pin header)= 30.6 x 28 x 5.6 mm [1.2” x 1.1” x 0.24”]
Pin header pitch = 6mm [0.2”]
Unit:mm[inch]
SideView
FrontView
Top View
Pin Definition
RB8762CJFDesigner’sGuide(RRD2Z50‐20190314001‐A09‐C2) 10
RB8762CMB Mechanical Dimensions
Size:
Evaluation Board= 62.6 x 55.1 x 15.0 mm [2.5” x 2.2” x 0.6”]
Unit:mm[inch]
FrontView
TopView
2-PH 2.54_2X11P;H=8.4
2-PH 0.10_2X11P;H=0.33”
SideView
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
