Rangevision PRO Manuale per l'uso e la cura
RANGEVISION
Setup and calibration
PRO
Contents
Introduction 3
Technicalspecifications 4
Systemrequirements 5
Preparingforwork
Packagecontents 5
Installingsoftwareanddrivers 7
Settingupyourcomputerfortheworkwiththescanner 8
Connectingprojector 8
Configuringcomputerparameters 9
ScannerAssembly 10
Scannersetup
ScanCenterNGlaunch 11
Selectscanningzone 13
Calibrationfieldparameters 13
Lensesinstalling 14
BlueLight 14
Placingthecalibrationplate 15
Initialsetupofcamerasandlenses 16
Findingaworkingdistance 17
Adjustmentoftheprojectorfocus 18
Bringingthecamerastogether 18
Finalcalibrationofthecameras 20
Cameras heating 23
Calibratingthescanner
Calibrationplate 24
Fullcalibration 26
Fastcalibration 28
Focus assessment during calibration 30
2
Introduction
ThankyouforchoosingRangeVisionproduct.
Please read this manual before using RangeVision 3D scanner. Here are described the
procedures for preparing the scanner, installing the required drivers, calibration
procedure, scanning procedure, and tips for acquiring high-quality three-dimensional
object model.
Informationmaybeamendedfromtimetotime.Thesechangeswillbe inserted into the
new versions of the manual, or in the additional documents and publications.
3
SpecificationsforPRO:
SpecificationsforPROBase:
Technicalspecifications:
4
FOV
[L]
[M]
[S]
Scanning area (WxHxD),
mm
550х340х360
320х210х200
140х90х80
3D-resolution,mm
0,18
0,10
0,04
Scanningdistance,mm
900
520
350
FOV
[L]
[M]
[S]
Scanningarea (WxHxD),
mm
520х390х360
280х210х200
115х85х80
3D-resolution,mm
0,25
0,13
0,05
Scanningdistance,mm
900
520
260
CameraresolutionforPROBase/PRO
3/6Mpix
Scanningmoduledimensions(WxLxH)
408х380х125мм
Outputdataformat
STL,OBJ,PLY,ASCII
Lightsource
LED
Scanningprinciple
Structuredlight
Scanningmoduleweight,
≤6,5kg
Operatingsystem
Windows7/8/1064bit
Powersource
100-240V,350W
Systemrequirements:
●operatingsystem-Windows7/8/1064bit,
●processor-IntelCorei3/i51.8GHzandbetter,
●graphicscardwithHDMIoutput,
●RAM-notlessthan8GB.
Preparingforwork
Packagecontents
RangeVision3Dscannerissuppliedinaplasticboxwithlodgement,optionallycan
besuppliedinaprotectedroadhardcase.
Thescannerisequippedwithatleastonescanningarea.Scanningareaisasetof
interchangeableoptics,calibrationplateandstandforthecalibrationplate.
5
*-dependsontheequipment
6
№
Name
qty.
1
Scanningmodule:
Installationconstructionwithprojector
1
CablekitforconnectiontoaPC(2USB+HDMI)
1
2
Machinevisioncamera
2
3
Tripod
1
4
Calibrationplate
1-4*
5
Kitofinterchangeableoptics
1-5*
6
Standforthecalibrationplate
1-2*
7
USBdiskwiththesoftware
1
8
Theelectronickey
1
9
Mattingspray
1
10
Markersforscanning
1
11
PowerCord5m
1
12
USBhub
1
13
Hexkey
1
14
Rotarytable+cables
1*
Installingsoftwareanddrivers
GettheRangeVisionsoftware(equippedwiththescanner)andruntheinstaller -
RangeVision SсanCenterNGsetup.
Followingtheprompts,selectthedesiredlanguage,typeandpathforinstallation. After
the files havebeencopiedinstalldriversandgraphicslibraries,necessaryforthe correct
operation of RangeVision3Dscanner.Theoldversionofdriverscanbe helpful if some
camera connectionproblemsoccur.
IfyouhaveaccesstotheInternet,RangeVisionScanCenterNGwillautomatically notify
you when updatesareavailable.Youcancheckforupdatesmanually by clicking
About→Check for Updates.
7
Settingupyourcomputerfortheworkwiththe
scanner
For the correct operation of RangeVision 3D scanner you will need tosetupyour
computer. This procedure is performed once before the first use of the scanner.
Connectingprojector
TurnontheprojectorandconnectittotheHDMI-portofyourvideocard. After
connecting the projector, it should be displayed in the system. If the computer has
several video outputs, define the one to be used.
1. Rightclickonthedesktop,selectScreenresolution.
2. Makesurethattheprojectorhasbeensuccessfullyrecognizedbythesystem
andthatbothconnectedscreensaredisplayed.
8
Configuringcomputerparameters
Toavoidarecurrenceoftheproblemsduringthescanneroperation,youmustturn
offthescreensaverandsleepmode.
Byclickingrightmousebuttononthedesktop,selectPersonalize→Screensaverand
turnoffthescreensaver,disableturningoffthedisplayandputtingthecomputerin
sleepmode.
9
ScannerAssembly
Carefullygetthescanningmoduleandallaccessoriesoutoftheplasticcase.
1. Setthetripodontheflatandstablesurface.
2. Fitthescanningmoduleonthetripod.
3. Attachthecamerastothescanner,iftheyarenotattachedyet.Cameras
mustrotatearoundtheiraxisfacingeachother,notinoppositedirections.
4. Installthecameralenskit(ifnotyetinstalled).Choiceoflensesisdescribedin
thesectiondedicatedtoScannerSetup.
5. ConnectUSBcabletothescannerandtothecomputer.Connectionshould
bemadeafterthedriverinstallation.
6. Connectthepowercord(220V)totheprojectorandturnonthemainpower.
TheswitchislocatedonthebottomofthescannernexttoUSB,HDMIand
powersockets.
7. ConnectHDMIcabletothescannerandtothecomputer.
8. Turnontheprojectorbypressingthebuttonontopofthescanningmodule.
9. InserttheelectronickeyintoafreeUSBport.
10. Connecttherotarytable(ifequipped)toyourcomputerusingtheUSB
cable.TheTLmodelalsorequirestoconnectthepowercord(3mcable).
10
Indice
Altri manuali Rangevision Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
