Raven ISOBUS Product Control Manuale utente
Copyright 2016
ISOBUS Product Control
Installation & Operation
Manual
016-0171-362 Rev. F 08/16 E28148
While every effort has been made to ensure the accuracy of this document,
Raven Industries assumes no responsibility for omissions and errors. Nor is any
liability assumed for damages resulting from the use of information contained
herein.
Raven Industries shall not be responsible or liable for incidental or consequential
damages or a loss of anticipated benefits or profits, work stoppage or loss, or
impairment of data arising out of the use, or inability to use, this system or any of
its components. Raven Industries shall not be held responsible for any
modifications or repairs made outside our facilities, nor damages resulting from
inadequate maintenance of this system.
As with all wireless and satellite signals, several factors may affect the availability
and accuracy of wireless and satellite navigation and correction services (e.g.
GPS, GNSS, SBAS, etc.). Therefore, Raven Industries cannot guarantee the
accuracy, integrity, continuity, or availability of these services and cannot
guarantee the ability to use Raven systems, or products used as components of
systems, which rely upon the reception of these signals or availability of these
services. Raven Industries accepts no responsibility for the use of any of these
signals or services for other than the stated purpose.
Disclaimer
©Raven Industries, Inc. 2009, 2011, 2012, 2013, 2014
Table of Contents
Manual No. 016-0171-362 Rev. F i
Calibration Reference Sheet .....................................................................................................3
Unit Definitions and Conversions ..............................................................................................4
Unit of Measure Definitions .................................................................................................4
Unit of Measure Conversions ..............................................................................................4
Chapter 1 Important Safety Information................................................. 1
Electrical Safety ...................................................................................................................1
Instructions for Wire Routing .....................................................................................................1
Instructions for Hose Routing ....................................................................................................2
Chapter 2 Introduction............................................................................. 5
Raven ISOBUS Product Control Node Kits ...............................................................................5
Updates .....................................................................................................................................6
Chapter 3 Installation............................................................................... 9
Mount the Flow Meter ...............................................................................................................9
Mount the Control Valve ..........................................................................................................10
By-Pass Plumbing .............................................................................................................10
Mount the Node ....................................................................................................................... 11
Install ISOBUS Product Control Cabling .................................................................................12
Mount the Foot Switch ............................................................................................................12
Implement Proximity Switch ....................................................................................................12
Chapter 4 ISOBUS Product Control Node Calibration........................ 13
Calibration Screen ...................................................................................................................14
Implement Calibration Tab ......................................................................................................15
Applicator Type ..................................................................................................................15
Total Width Display ............................................................................................................15
Section Setup ....................................................................................................................16
Product Control Calibration Tab ..............................................................................................17
Control Type ......................................................................................................................18
Meter Cal or Spreader Constant ........................................................................................18
Valve Delay .......................................................................................................................19
Tank or Bin Capacity .........................................................................................................19
Self Test Speed .................................................................................................................19
Speed Cal ..........................................................................................................................20
Pump RPM Cal ..................................................................................................................20
Valve Cal ...........................................................................................................................20
Tiered Boom Settings ........................................................................................................22
Spinner/Fan Control Setup ................................................................................................22
HP Pressure or HP Plus Control Setup .............................................................................23
Pulse Width Modulation Valve Setup .................................................................................25
Table of Contents
ii ISOBUS Product Control Installation & Operation Manual
Feature Settings ................................................................................................................29
Alarms Setup Tab ....................................................................................................................32
Low Tank ...........................................................................................................................32
Low Limit ...........................................................................................................................32
Off Rate Percent ................................................................................................................33
RPM Off Rate Percent (Granular Applications Only) .........................................................33
Dual Encoder Error Percent (Granular Applications Only) ................................................33
Bin Level Sensor (Granular Applications Only) .................................................................33
Low Limit Pressure Setting ................................................................................................33
Low Supply Pressure Setting (AccuFlow HP Plus Applications Only) ...............................33
Low Pressure Alarm (AccuFlow HP Applications Only) ....................................................33
Pump Fault Alarm (AccuFlow HP Plus Applications Only) ................................................33
Information ..............................................................................................................................34
Diagnostics ..............................................................................................................................34
Chapter 5 ISOBUS Product Control Operation ................................... 35
Product Control Home Screen ................................................................................................35
Quick Access Softkeys ......................................................................................................36
Remote Master Status .......................................................................................................37
Control Mode (Auto/Manual) .............................................................................................37
Application Speed ..............................................................................................................37
Pump RPM Cal (Spray Applicator) ....................................................................................38
Product Density (Granular Applications) ...........................................................................38
Target Pressure (NH3 Applications) ..................................................................................38
Pressure or Spinner/Fan RPM Display ..............................................................................39
Rates Area .........................................................................................................................40
Remaining Tank/Bin Volume ..............................................................................................41
Volume/Weight Applied .....................................................................................................41
Area Covered ....................................................................................................................42
Injection Pump Status Button ............................................................................................42
Section Status Display .......................................................................................................43
On-Screen Manual Section Controls .................................................................................43
Section Override ................................................................................................................44
Tiered Boom Status Display ..............................................................................................45
Tally Registers .........................................................................................................................45
Field Area and Volume ......................................................................................................46
Total Area and Volume ......................................................................................................46
Distance .............................................................................................................................46
Volume per Minute Display ................................................................................................46
Area per Hour Display .......................................................................................................46
Table of Contents
Manual No. 016-0171-362 Rev. F iii
Chapter 6 Troubleshooting ................................................................... 47
Appendix 7 System Diagrams.................................................................. 49
Appendix 8 Calculating the Calibration Values...................................... 59
Section Widths ........................................................................................................................59
Broadcast ..........................................................................................................................59
Band ..................................................................................................................................59
Rate Cal ..................................................................................................................................59
Tiered Boom Settings ..............................................................................................................60
Valve Cal .................................................................................................................................62
Valve Backlash Digit ..........................................................................................................62
Valve Speed Digit ..............................................................................................................62
Brake Point Digit ................................................................................................................62
Dead Band Digit ................................................................................................................62
Valve Cal 2 ........................................................................................................................63
Flow Cal (Dual Loop Control Mode) ..................................................................................63
Sgain (Pressure System Gain - Dual Loop Control Mode) ................................................63
Spreader Constant ..................................................................................................................64
Standard Rate display .......................................................................................................64
Metric Rate Display ...........................................................................................................64
Verification of Spreader Constant ......................................................................................64
Spinner RPM ...........................................................................................................................66
Valve Type .........................................................................................................................66
RPM Meter Cal ..................................................................................................................67
RPM Target .......................................................................................................................67
Appendix 2 Flow Meter Maintenance and Adjustment Procedure......... v
Flow Meter Maintenance ...........................................................................................................v
Testing Flow Meter Cables ........................................................................................................v
Testing the Flow Meter/Encoder Cable ...............................................................................v
Procedure to Recalibrate Flow Meter .......................................................................................vi
Table of Contents
iv ISOBUS Product Control Installation & Operation Manual
Manual No. 016-0171-362 Rev. F vii
CALIBRATION REFERENCE SHEET
Record the settings and calibration values used when programming the field computer and keep this sheet for
future reference or when contacting a service technician.
Circle the setting selected on the field computer for the following options:
Write down the calculated calibration values in the spaces provided.
UNITS US (Acres) SI (Hectares) Turf (1000 Square Feet)
CONTRO
L TYPE Liquid Sprayer Gran 1
(Single belt bed)
Gran 2
(Split belt bed,
single encoder)
Gran 3
(Split belt bed,
dual encoders)
Spinner RPM
Control
VALVE
TYPE Standard Valve Fast Valve Fast Close Valve PWM Valve PWM Close
Valve
Boom Widths
(Boom Cal) Meter Cal Rate Cal Valve Cal Volume in
Tank/Bin
1. 1. 1. 1. 1.
2. 2. 2. 2. 2.
3. 3. 3. 3. 3.
4. 4. 4. 4. 4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
CHAPTER 1
viii ISOBUS Product Control Installation & Operation Manual
UNIT DEFINITIONS AND CONVERSIONS
UNIT OF MEASURE DEFINITIONS
UNIT OF MEASURE CONVERSIONS
To convert the METER CAL value into the selected unit of measure, divide the original number printed on the Flow
Meter label by the desired conversion value.
Density
(Granular
Only)
Spreader
Constant
(Granular
Only)
1. 1.
2. 2.
3. 3.
4. 4.
Abbreviation Definition Abbreviation Definition
GPM Gallons per Minute dm Decimeters
lit/min Liters per Minute m Meter
dl/min Deciliters per Minute MPH Miles per Hour
PSI Pounds per Square Inch km Kilometers
kPa Kilopascal km/h Kilometers per Hour
GPA Gallons per Acre US Volume per Acre
lit/ha Liters per Hectare SI Volume per Hectare
ml/ha Milliliters per Hectare TU Volume per 1,000 Square Feet
GPK Gallons per 1,000 Square Feet [ ] Metric Numbers
mm Millimeters lb/acre Pounds per Acre
cm Centimeters kg/ha Kilograms per Hectare
Fluid Ounces Conversion
Formula Liters Conversion Formula Pounds Conversion Formula
Original METER CAL Number
128
Original METER CAL Number
3.785
Original METER CAL Number
Weight of One Gallon of Product
Manual No. 016-0171-362 Rev. F ix
Liquid Area
• 1 U.S gallon = 128 fluid ounces • 1 square meter = 10.764 square feet
• 1 U.S. gallon = 3.785 liters • 1 hectare = 2.471 acres or 10,000 square meters
• 1 U.S. gallon = 0.83267 imperial gallons • 1 acre = 0.405 hectares or 43,560 square feet
• 1 U.S. gallon = 8.34 pounds (water) • 1 square mile = 640 acres or 258.9 hectares
Length Pressure
• 1 millimeter (mm) = 0.039 inches • 1 psi = 6.89 kPa
• 1 centimeter (cm) = 0.393 inches • 1 kPa = 0.145 psi
• 1 meter (m) = 3.281 feet Weight
• 1 kilometer (km) = 0.621 miles • 1 Pound = 16 Ounces
• 1 inch = 25.4 mm or 2.54 cm • 1 Pound = 0.45 Kilograms
• 1 mile = 1.609 km
CHAPTER 1
x ISOBUS Product Control Installation & Operation Manual
Altri manuali per ISOBUS Product Control
1
Indice
Altri manuali Raven Unità di controllo
Raven
Raven New Holland AutoBoom XRT Manuale per l'uso e la cura
Raven
Raven SBG SmartGrid Manuale utente
Raven
Raven SCS 661 Manuale
Raven
Raven Envizio Pro Series Manuale utente
Raven
Raven AccuBoom 117-1001-076 Manuale utente
Raven
Raven TM-1 Manuale di installazione e funzionamento
Raven
Raven RCM Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
