REED R9030 Manuale utente

reedinstruments

www com

Model R9030

Hardness Tester

Instruction

Manual

INSTRUMENTS

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Table of Contents

Features...................................................................................................... 3

Applications................................................................................................ 3

Specications............................................................................................. 4

Instrument Description............................................................................... 5

Display Description .................................................................................... 6

Operating Instructions................................................................................ 6

Power On/Off........................................................................................... 6

Navigating Instrument Menu .................................................................... 7

Instrument Calibration................................................................................ 7

Charging..................................................................................................... 8

Battery Replacement.................................................................................. 8

Auto Shut Off.............................................................................................. 8

Maintenance............................................................................................... 9

Appendix A: Hardness Scale Tables ...................................................10-12

Appendix B: Setup Guide....................................................................13-15

1.0 Hardness Testing principle............................................................... 13

2.0 Preparation of test surface............................................................... 13

3.0 Adjusting R9030 Settings ................................................................ 14

4.0 Instrument Calibration...................................................................... 14

5.0 Start-up........................................................................................... 14

6.0 Loading ........................................................................................... 14

7.0 Taking Measurements...................................................................... 15

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Features

• Measuresawiderangeofmaterialsincluding;caststeel,alloysteel,

stainlesssteel,aluminum,bronze,copperandcastirons

• Measures7typesofhardnessscales;Rockwell(HRC,HRB,HRA),

Brinell(HB),Leeb(HL),Vickers(HV)andShore(HS)

• Compactpenstyledesign

• BrightOLEDdisplay

• Real-timeclockandinternalmemorystoresupto350measurements

• USBconnectivityandsoftwareallowsforfurthermeasurementanalysis

• Rechargeablelithiumbattery

• Lowbatteryindicator

Applications

• Idealforhardnesstestingoflargeandheavyobjects

• Inproductionlinesofmassproducedcomponents

• Materialsidenticationinstoresandwarehouses

• Inlocationswithdifcultaccess,orinconnedspaces

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Specifications

HardnessScales Rockwell(HRA,HRB,HRC)

 Brinell(HB)

 Leeb(HLD)

 Vickers(HV)

 Shore(HS)

Measuring Ranges HRA: 59 to 85

HRB: 13 to 100

HRC: 20 to 68

HB: 19 to 651

 HLD:170to960

 HV:80to967

HS: 30 to 100

Measuring Direction 360°

SamplingTime Lessthan1sec(whentriggered)

Display DotMatrixOLED

BatteryLife Approx.40hours

LowBatteryIndicator Yes

PowerSupply RechargeableLithiumIonBattery

Charge Time Approx. 2 hours

InternalMemory Yes(upto350readings)

PCConnectivity USBCable/Bluetooth

Software Yes(Included)

SoftwareOSCompatibility WindowsXP/Vista/7/8

ProductCertications CE

OperatingTemperature 32to104°F(0to40°C)

StorageTemperature -4to140°F(-20to60°C)

Operating Humidity Range 0 to 90%

Dimensions 5.7x1.3x1”(146x32x26mm)

Weight 5.6oz(160g)

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Instrument Description

 On/Off/Exit

 Menu/Confirm

 Measuringsetshortcut/Right/Down/Increase

 Scan/Delete/Left/Up/Decrease



www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Display Description

Battery Indicator:Displaysbatterycapacityandchargestatuswhen

plugged in.

Impact direction: Set impact direction.

Hardness scale: Set hardness scale.

Measured value:Currentmeasuredvalue(withoutaveragevalue

indicator),orcurrentaveragevalue(withaveragevalueindicator).

Material: Set material.

Impact times:Thetotalnumberofimpacttimeswillbedisplayed.Impact

timessetthroughthemenuwillalsobedisplayedhere.

Bluetooth:TheBluetoothagwillbedisplayedwhenBluetoothisconnected.

Connection ﬂag:Theconnectionagwillblinkwhentheinstrumentis

trying to connect to the PC. A solid ag means successful connection.

Operating Instructions

Power On/Off

Press the keytoturnpoweronoroff.

Note:Ifthetesterhasbeenshutdown,itwillstartupautomaticallywhencharging.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Navigating Instrument Menu

Browsing measurements

Whentestingisnished,pressthe keytoenterdatabrowsemode.

Press the keytoscrollthroughdata.Ifyouwanttodeletedisplayed

data,pressthe key.Pressthe or keytoconrmselection.

Press the keytodeletedisplayeddata,orpressthe keytoexit.

Measured value storage

Whentestingisnishedtheinstrumentdisplaystheaveragevalue.Pressthe

keyandthenpressthe or keystochoosetostoretheaverage

valuemeasurement.Pressthe keytoconrmorthe keytoexit.

Short-cut measuring setting

Inthestandbyinterface,pressthe keytoentertheshort-cut

measuring settings. First the cursor is on the hardness scale and press

the keytochangeitcyclically.Thenpressthe keytomovecursor

cyclically on the measuring conditions and press the keytoexit.

Instrument Calibration

ThetesterandimpactdevicemustbecalibratedwithastandardLeeb

hardnesstestblockpriortofirstuse,orafternotusingtheinstrumentfor

an extended period of time.

Press the keyaswellasthe keyatthesametimetoenterinstru-

ment calibration mode. The interface impact times is set to 5 by default.

TheselectedimpactdirectionshouldbeverticallydownontheLeebhard-

nesstestblock.

Averagevaluewillbeshowedaftermeasuring.Pressthe or the key

toinputnominalvalue.Pressthe keytofinishcalibrationandbackto

the main unit.

Note:calibrationrangeis±15HL.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Charging

Batterysymbolwillflash if battery capacity is close to empty.

Thetesterwillautomaticallyswitchonduringcharging. and

willflashalternatelywhileinchargemode. willflash

once fully charged.

Battery Replacement

TheR9030isequippedwithalithiumrechargeablebattery.Batterylife

expectancywithregularuseis3years.Shouldyourequireanewbattery

pleasecontactREEDInstruments1-877-849-2127or

[email protected].

Auto Shut Off

• Autoswitchofffunctionissuppliedtosavetheenergyofbattery.

• Ifneithermeasurementnoranykeyoperationisperformedwithin5

minute,thetesterwillswitchoffautomatically,aashshowingfor10

secondsontheOLEDscreenpriortoswitchoff.Atthistime,anykey

except the keycanbepressedtostoptheashofOLEDscreen,

andcanceltheswitchoffoperation.

• Incaseoftoolowbatteryvoltage,“BatteryEmpty!”willbedisplayed

andswitchoffautomatically.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Maintenance

• Afterusingtheimpactdevice1000times,itisrecommendedtousethe

nylonbrushprovidedtocleantheguidetubeandtheimpactbodyof

theimpactdevice.Tocleantheguidetube,unscrewthesupportring

andthentakeouttheimpactbody.Usethenylonbrushtocleanina

counter-clockdirection.Repeatthis5timesandremounttheimpact

body and the support ring.

• Remembertoreleasetheimpactbodyafteruse

• Itisstronglyrecommendedtonotuseanylubricantagenttocleanthe

impactdevice

• Thetestershouldbestoredatroomtemperature,awayfromvibration,

strongmagneticeld,corrosivemedium,dampnessanddust.

ForserviceonthisoranyotherREEDproductorinformationonother

REEDproducts,contactREEDInstrumentsatinfo@reedinstruments.com

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Appendix A: Hardness Scale Tables

TheR9030includesDimpactdevice.PleasenotethatimpactdevicesDL,

DC,D+15andCcanbeorderedseperately.Formoreinformationplease

contactusat1-877-849-2127or[email protected].

Non conventional impact devices DC(D)/DL D+15 C

Impacting energy 11mJ 11mJ 2.7mJ

Mass of impact body 5.5g/7.2g 7.8g 3.0g

Test tip Hardness 1600HV 1600HV 1600HV

Diameter of test tip 3mm 3mm 3mm

Material of test tip Tungsten

carbide

Tungsten

carbide

Tungsten

carbide

ImpactdeviceDiameter 20mm 20mm 20mm

ImpactdeviceLength 86(147)/

75mm 162mm 141mm

ImpactdeviceWeight 50g 80g 75g

Max.hardnessofworkpiece 940HV 940HV 1000HV

Meanroughnessofworkpiecesurface

of the Ra 1.6μm 1.6μm 0.4μm

Min.weightofsample:

Measure directly

Need support rmly

Need coupling tightly

>5kg >5kg >1.5kg

2-5kg 2-5kg 0.5-1.5kg

0.05-2kg 0.05-2kg 0.02-0.5kg

Min.thicknessofsample:

Coupling tightly

Min.layerthicknessforsurfaceharden

5mm 5mm 1mm

≥0.8mm ≥0.8mm ≥0.2mm

Hardness300HV Indentation diameter 0.54mm 0.54mm 0.38mm

Indentation depth 24μm 24μm 12μm

Hardness600HV Indentation diameter 0.54mm 0.54mm 0.32mm

Indentation depth 17μm 17μm 8μm

Hardness800HV Indentation diameter 0.35mm 0.35mm 0.35mm

Indentation depth 10μm 10μm 7μm

Availabletypeof

impactdevice

D: General test

DC: Hole or hollow-cylindrical test

DL: Slender narrow groove or hole

test

D+15:

grooveor

reentrant

surface

C:small,

light,thin

parts or

surface of

hardened

layer

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Altri manuali per R9030

Indice

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente