Ricoh Pro c901 Manuale di servizio

Technical Bulletin PAGE: 1/5

Reissued: 09-Jan-14

Model: Aries-P1.5

Date: 04-Oct-10

No.: RM077001h

RTB Reissue

The items in bold italics have been added.

Subject: Firmware Release Note: Engine

Prepared by: T. Miyamoto

From: 1st PP Tech Service Sect., PP Tech Service Dept.

Classification:

Troubleshooting

Mechanical

Paper path

Part information

Electrical

Transmit/receive

Action required

Service manual revision

Retrofit information

Product Safety Other (Firmware)

Tier 2

This RTB has been issued to announce the firmware release information for the Engine.

Version

Program No.

Effective Date

Availability of RFU

1.009:16

M0775253B

January 2014 production

Not available

1.008:16

M0775253A

January 2013 production

Not available

1.007:16

M0775253

June 2012 production

Not available

1.006:16

M0775252E

July 2011 production

Not available

1.005:16

M0775252D

May 2011 production

Not available

1.004:16

M0775252C

April 2011 production

Not available

1.003:16

M0775252B

February 2011 production

Not available

1.000A:16

M0775252A

1st Mass production

Not available

Note: Definition of Availability of RFU via @Remote

“Available” The firmware can be updated via RFU or SD card.

“Not available”: The firmware can only be updated via SD card.

Version

Modified Points or Symptom Corrected

1.009 :16

Specification changes:

1. To meet the Energy Star Ver2.0 standards, ITB alignment control

values are no longer stored on the NVRAM during monochrome

printing.

2. Higher reliability against SC39x (drum-lock); machine warm-up

following a forced termination is performed after activating the

development motor.

3. Higher reliability against Jam 170 when alternately running A3/DLT

and A4/LT staple jobs.

NOTE

When applying this firmware, make sure to upgrade the firmware for

SR5020 to Ver.3.19 (P/N:D4345620N) or newer.

Technical Bulletin PAGE: 2/5

Reissued: 09-Jan-14

Model: Aries-P1.5

Date: 04-Oct-10

No.: RM077001h

Version

Modified Points or Symptom Corrected

1.008 :16

Modified Points

Support for both ProC901 and ProC901 PLUS

Following Firmware need to be updated together.

Part number

Version

Web Support

M0776083A

1.04

Engine

M0775253A

1.008:16

System

M0776081A

2.00

1.007:16

Modified Points

1. Improvement for shockjitter

2. Improvement for removing JAM037

3. Countermeasure against SC621

4. Countermeasure against SC453

5. Improvement for mis-display of SR5020 JAM

6. Countermeasure against displaying "Now printing" while adjusting the

fusing temperature

7. Countermeasure against jam in SR5020 soon after recovering from pause

during stapling, and irregular paper stock.

When the flywheel is added to the machine for a countermeasure against the

shockjitter, following SP need to be changed together.

SP2-992-001: 0.0 -> 0.5

SP2-993-001: 0 -> 1

Following Firmware need to be updated together

Part number

Version

Web Support

M0776083

1.03.1

Engine

M0775253

1.007:16

System/Copy

M0776081

1.07

1.006:16

Modified Points

- JAM for following situation has been fixed

decurler setting is changed for every sheet, and paper is feed from

different tray every sheet.

Eg. 1st sheet from tray 1 go through upper pass of decurler

2nd sheet from tray 3 go through lower pass of decurler

3rd sheet from tray 1 go through upper pass of deculer again <-- JAM

- Order of signal from SR5020 has been modified to prevent the lost of

SR5020 setting

- PM counter for thermistor can be cleared

Following firmware need to be upgraded together

Part number

version

Engine

M0775252E

1.006:16

System/Copy

M0776091E

1.04

Websys

M0776093C

1.02

Technical Bulletin PAGE: 3/5

Reissued: 09-Jan-14

Model: Aries-P1.5

Date: 04-Oct-10

No.: RM077001h

Version

Modified Points or Symptom Corrected

Ope Panel CHN

M0776387

1.05

Ope Panel NA

M0776385C

1.05

Ope Panel EU

M0776386C

1.05

Language

M0776390B

1.04

Network Support

M0776692C

7.12

1.005:16

Modified Points

- Early web cleaning indication has been fixed

- fuser unit PM counter is corresponding to several fusing unit to prevent

fusing belt from wearing away

- Countermeasure for 2 output checks, waste toner could clog and disable

the function of the toner collection coil, which could result in breakage of

the gear rotating the waste toner transport coil, and toner leakage.

- Following adjustable range has been changed in Web Image Monitor

Erase Margin Adj Leading Edge

Erase Margin Adj Trailing Edge

Minimum setting 0.0 --> -6.0

Following firmware need to be upgraded together

Part number

Version

Engine

M0775252D

1.005:16

System/Copy

M0776091D

1.03

Websys

M0776093B

1.01

Ope Panel NA

M0776385B

1.04

Ope Panel EU

M0776386B

1.04

Language

M0776390A

1.03

1.004:16

Modified Points

Bugs in menu items in Custom Paper Setting Advanced Setting are fixed.

Item Menu No. 03 "Pickup Assist Setting"

Item Menu No. 15 "Paper Transfer Feed Speed Adjustment"

Bug which has been fixed

Even the No. 03 "Pickup Assist Setting"was set as OFF, inside the machie,

"Pickup Assist Setting" was set to auto setting; therefore, depending on Paper

weight and Paper Size, "Pickup Assist Setting"

was activated.

Even the No 15 "Paper Transfer Feed Spped Adjustment" was set as

0.0, PTR was not moving at the correct speed

Apply Condition for Creo Controller

Please use Creo Controller Ver 1.003:16 or older.

Technical Bulletin PAGE: 4/5

Reissued: 09-Jan-14

Model: Aries-P1.5

Date: 04-Oct-10

No.: RM077001h

Version

Modified Points or Symptom Corrected

1.003:16

Modified Points

＜Specification Changes＞

1. Creo controller is supported.

2. New function has been added to avoid decrease in productivity which

occurs when frequently activating/deactivating the units involving image

creation.

SP2-908-001 Deactivating image creation｜Extend deactivation time ON/OFF

SP2-908-002 Deactivating image creation｜Time extended

This function is not available on System Firmware 1.01 or older.

It will become available when the System Firmware is upgraded.

(Firmware Version: TBA)

3. Saddle-stitching is available with custom paper sizes on the Plockmatic.

(Available when connected to the Creo controller)

4. Potential control has been modified to avoid the problem of ID exceeding

the upper limit when powering on the machine.

＜Fixes＞

1. Problem of decrease in print speed when saddle-stitching SRA3 on the

Booklet Finisher (SR5020) has been fixed.

2. Problem of the printer halting and disabled to resume from an error when

saddle-stitching in duplex on the Plockmatic has been fixed.

3. Problem of the printer disabled to warm-up and recover from a jam or

open-door status has been fixed.

4. Problem of indicating incorrect jam locations in the downstream peripherals

when the configuration consists of both Booklet Trimmer (TR5020) and

Stacker (SK5010) has been fixed.

Apply condition:

Firmwares below to be applied together as a set.

Program Name

Program No.

Version

System

M0776091B

1.01

Network Support (NCS)

M0776092B

7.11

Engine

M0775252B

1.003:16

* Update to the following versions is required for all peripherals listed below.

Program No.

Version

SR5000

B8305102S

V02.030:62

SR5020

D4345620K

V03.160:08

TR5020

D4555510D

V15.280:16

Note

- Make sure to update the peripherals in order of proximity to the main

frame.

- Do not update consecutively by selecting several peripherals

1.000A:16

1st Mass production

Technical Bulletin PAGE: 1/2

Reissued: 12-Jul-11

Model: Aries-P1.5 Date: 04-Oct-10 No.: RM077002b

RTB Reissue

The items in bold italics have been corrected.

Subject: Firmware Release Note: Language Install Prepared by: H. Kawamura

From: PPBG Service Planning Dept.

Classification: Troubleshooting

Mechanical

Paper path

Part information

Electrical

Transmit/receive

Action required

Service manual revision

Retrofit information

Product Safety Other (Firmware) Tier 2

This RTB has been issued to announce the firmware release information for the

Language Install.

Version Program No. Effective Date

1.04 M0776390B July 2011 Production

1.03 M0776390A May 2011 production

1.01 M0776390 1st Mass production

Version Modified Points or Symptom Corrected

1.04 Modified Points

- In the Paper Library, Advanced setting for paper created from "*Not

Programmed" can be adjusted.

- When replacing GW-Controller, data saved to paper library can be

restored.

- On the operation panel, Paper Library screen, some words have

been changed.

・ Recall Paper Library

→

Paper Library

・ Program/Change/Delete Custom Paper

→

Custom Paper

Following firmware need to be upgraded together

Part number version

Engine M0775252E 1.006:16

System/Copy M0776091E 1.04

Websys M0776093C 1.02

Ope Panel CHN M0776387 1.05

Ope Panel NA M0776385C 1.05

Ope Panel EU M0776386C 1.05

Language M0776390B 1.04

Network Support M0776692C 7.12

Technical Bulletin PAGE: 2/2

Reissued: 12-Jul-11

Model: Aries-P1.5 Date: 04-Oct-10 No.: RM077002b

Version Modified Points or Symptom Corrected

1.03 Modified point

- fuser unit PM counter is corresponding to several fusing unit to prevent

fusing belt from wearing away

Following firmware need to be upgraded together

Part number Version

Engine M0775252D 1.005:16

System/Copy M0776091D 1.03

Websys M0776093B 1.01

Ope Panel NA M0776385B 1.04

Ope Panel EU M0776386B 1.04

Language M0776390A 1.03

1.01 1st Mass production

Technical Bulletin PAGE: 1/3

Reissued: 11-Jul-11

Model: Aries-P1.5 Date: 04-Oct-10 No.: RM077003b

RTB Reissue

The items in bold italics have been corrected.

Subject: Firmware Release Note: OpePanel.EXP Prepared by: H. Kawamura

From: PPBG Service Planning Dept.

Classification: Troubleshooting

Mechanical

Paper path

Part information

Electrical

Transmit/receive

Action required

Service manual revision

Retrofit information

Product Safety Other (Firmware) Tier 2

This RTB has been issued to announce the firmware release information for the

OpePanel.EXP.

For US Models

Version Program No. Effective Date

1.05 M0776385C July 2011 production

1.04 M0776385B May 2011 production

1.01 M0776385A 1st Mass production

For EU Models

Version Program No. Effective Date

1.05 M0776386C July 2011 Production

1.04 M0776386B May 2011 production

1.01 M0776386A 1st Mass production

For CHN Models

Version Program No. Effective Date

1.05 M0776387 1st Mass production

Technical Bulletin PAGE: 2/3

Reissued: 11-Jul-11

Model: Aries-P1.5 Date: 04-Oct-10 No.: RM077003b

For US Models

Version Modified Points or Symptom Corrected

1.05 Modified Points

- In the Paper Library, Advanced setting for paper created from "*Not

Programmed" can be adjusted.

- When replacing GW-Controller, data saved to paper library can be

restored.

- On the operation panel, Paper Library screen, some words have

been changed.

- Recall Paper Library -> Paper Library

- Program/Change/Delete Custom Paper -> Custom Paper

Following firmware need to be upgraded together

Part number Version

Engine M0775252E 1.006:16

System/Copy M0776091E 1.04

Websys M0776093C 1.02

Ope Panel CHN M0776387 1.05

Ope Panel NA M0776385C 1.05

Ope Panel EU M0776386C 1.05

Language M0776390B 1.04

Network Support M0776692C 7.12

1.04 Modified point

- fuser unit PM counter is corresponding to several fusing unit to prevent

fusing belt from wearing away

Following firmware need to be upgraded together

Part number Version

Engine M0775252D 1.005:16

System/Copy M0776091D 1.03

Websys M0776093B 1.01

Ope Panel NA M0776385B 1.04

Ope Panel EU M0776386B 1.04

Language M0776390A 1.03

1.01 1st Mass production

Technical Bulletin PAGE: 3/3

Reissued: 11-Jul-11

Model: Aries-P1.5 Date: 04-Oct-10 No.: RM077003b

For EU Models

Version Modified Points or Symptom Corrected

1.05 Modified Points

- In the Paper Library, Advanced setting for paper created from "*Not

Programmed" can be adjusted.

- When replacing GW-Controller, data saved to paper library can be

restored.

- On the operation panel, Paper Library screen, some words have

been changed.

- Recall Paper Library -> Paper Library

- Program/Change/Delete Custom Paper -> Custom Paper

Following firmware need to be upgraded together

Part number Version

Engine M0775252E 1.006:16

System/Copy M0776091E 1.04

Websys M0776093C 1.02

Ope Panel CHN M0776387 1.05

Ope Panel NA M0776385C 1.05

Ope Panel EU M0776386C 1.05

Language M0776390B 1.04

Network Support M0776692C 7.12

1.04 Modified point

- fuser unit PM counter is corresponding to several fusing unit to prevent

fusing belt from wearing away

Following firmware need to be upgraded together

Part number Version

Engine M0775252D 1.005:16

System/Copy M0776091D 1.03

Websys M0776093B 1.01

Ope Panel NA M0776385B 1.04

Ope Panel EU M0776386B 1.04

Language M0776390A 1.03

1.01 1st Mass production

For CHN Models

Version Modified Points or Symptom Corrected

1.05 1st Mass production

Technical Bulletin PAGE: 1/2

Reissued: 12-Jul-11

Model: Aries-P1.5 Date: 04-Oct-10 No.: RM077004b

RTB Reissue

The items in bold italics have been corrected.

Subject: Firmware Release Note: Network Support Prepared by: H.Kawamura

From: PPBG Service Planning Dept.

Classification: Troubleshooting

Mechanical

Paper path

Part information

Electrical

Transmit/receive

Action required

Service manual revision

Retrofit information

Product Safety Other (Firmware) Tier 2

This RTB has been issued to announce the firmware release information for the Network

Support.

Version Program No. Effective Date

7.12 M0776092C July 2011 production

7.11 M0776092B February 2011 production

7.10 M0776092A 1st Mass production

Version Modified Points or Symptom Corrected

7.12 Modified Points

- If SSDP = Active (Web ImageMonitor > Configuration > Network

Security), a high load on the CPU might result in Web ImageMonitor

locking up.

- LP with an external controller will lose network connectivity. This

only occurred if the network settings were changed repeatedly and

the LP's "NetWare" setting was already "Active" (before the network

settings were changed).

- The LP icon might not be shown in the Windows "Network" dialogue

if SSDP is enabled. This affected Windows Vista, 2008/R2, and 7.

- The device might lose network connectivity if SSDP is enabled.

Network connectivity could be temporarily restored after a power

cycle.

Following firmware need to be upgraded together

Part number version

Engine M0775252E 1.006:16

System/Copy M0776091E 1.04

Websys M0776093C 1.02

Ope Panel CHN M0776387 1.05

Ope Panel NA M0776385C 1.05

Ope Panel EU M0776386C 1.05

Language M0776390B 1.04

Network Support M0776692C 7.12

Altri manuali per pro c901

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ricoh Stampante

Ricoh

Ricoh SP 210 Manuale utente

Ricoh

Ricoh Pro 1106EX Manuale utente

Ricoh

Ricoh M001 Manuale utente

Ricoh

Ricoh PRIPORT VT1730 Manuale utente

Ricoh

Ricoh D124 Manuale

Ricoh

Ricoh Ri 100 Manuale utente

Ricoh

Ricoh SP 213Nw Manuale utente

Ricoh

Ricoh Aficio SP 5200DN Manuale utente

Ricoh

Ricoh AFICIO MP 6001 Manuale utente

Ricoh

Ricoh PE-MF4 Series Guida all'installazione

Ricoh

Ricoh Be-C2 Guida all'installazione

Ricoh

Ricoh B245-62 Manuale

Ricoh

Ricoh 220-240 V Guida rapida

Ricoh

Ricoh AP2610 - Aficio B/W Laser Printer Manuale utente

Ricoh

Ricoh SP 110 SU Manuale utente

Ricoh

Ricoh SP150 series Manuale utente

Ricoh

Ricoh Infoprint 1754 Express Manuale utente

Ricoh

Ricoh Aficio SP4100 Series Manuale utente

Ricoh

Ricoh SP 110 SU Manuale utente

Ricoh

Ricoh VD4007001 Manuale utente

Ricoh

Ricoh InfoPrint 1622 Express Manuale utente

Ricoh

Ricoh SP 5310DN Manuale utente

Ricoh

Ricoh AP410 Manuale operativo

Ricoh

Ricoh A028 Guida all'installazione

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh pro c901 Manuale di servizio

Manuali Stampante popolari di altre marche