Riello UPS NetMan 204 Manuale utente

- 2 -

INTRODUCTION

Thank you for choosing our product.

The accessories described in this manual are of the highest quality, carefully designed and built in

order to ensure excellent performance.

This manual contains detailed instructions on how to install and use the product.

This manual must be stored in a safe place and CONSULTED BEFORE USING THE DEVICE

for proper usage instructions as well as maximum performance from the device itself.

NOTE: Some images contained in this document are for informational purposes only and may not

faithfully demonstrate the parts of the product they represent.

Symbols used in this manual:

Warning

Indicates important information that must not be ignored.

Information

Provides notes and useful suggestions for the User.

SAFETY

This part of the manual contains SAFETY precautions that must be followed scrupulously.

The device has been designed for professional use and is therefore not suitable for use in

the home.

The device has been designed to operate only in closed environments. It should be

installed in rooms where there are no inflammable liquids, gas or other harmful substances.

Take care that no water or liquids and/or foreign bodies fall into the device.

In the event of a fault and/or impaired operation of the device, do not attempt to repair it but

contact the authorized service centre.

The device must be used exclusively for the purpose for which it was designed. Any other

use is to be considered improper and as such dangerous. The manufacturer declines all

responsibility for damage caused by improper, wrong and unreasonable use.

- 3 -

ENVIRONMENTAL PROTECTION

Our company devotes abundant resources to analyzing environmental aspects in the development

of its products. All our products pursue the objectives defined in the environmental management

system developed by the company in compliance with applicable standards.

Hazardous materials such as CFCs, HCFCs or asbestos have not been used in this product.

When evaluating packaging, the choice of material has been made favoring recyclable materials.

Please separate the different material of which the packaging is made and dispose of all material in

compliance with applicable standards in the country in which the product is used.

DISPOSING OF THE PRODUCT

The device contains internal material which (in case of dismantling/disposal) are considered

TOXIC, such as electronic circuit boards. Treat these materials according to the laws in force,

contacting qualified centers. Proper disposal contributes to respect for the environment and human

health.

manufacturer.

The manufacturer reserves the right to change the product described at any time without prior notice for

improvement purposes.

- 4 -

CONTENTS

DESCRIPTION ____________________________________________________ 6

OVERVIEW ____________________________________________________________6

PACKAGE CONTENTS _____________________________________________________6

FRONT PANEL __________________________________________________________7

Network port _____________________________________________________________ 7

Micro-USB port ___________________________________________________________ 7

Serial port _______________________________________________________________ 7

LED_____________________________________________________________________ 7

GSM Modem _____________________________________________________________ 8

Reset button _____________________________________________________________ 8

USERS _______________________________________________________________8

NETWORK SERVICES _____________________________________________________9

SSH_____________________________________________________________________ 9

Serial network ____________________________________________________________ 9

Wake-on-LAN_____________________________________________________________ 9

HTTP____________________________________________________________________ 9

SNMP ___________________________________________________________________ 9

UDP_____________________________________________________________________ 9

Modbus TCP/IP __________________________________________________________ 10

BACnet/IP_______________________________________________________________ 10

FTP ____________________________________________________________________ 10

Syslog _________________________________________________________________ 10

Email___________________________________________________________________ 10

Reports_________________________________________________________________ 10

DEVICE VALUES AND EVENTS HISTORY LOG ARCHIVE _____________________________11

Eventlog________________________________________________________________ 11

Datalog (only for UPS devices) _____________________________________________ 11

ENVIRONMENTAL SENSORS (OPTIONAL)_______________________________________12

Available sensors ________________________________________________________ 12

INSTALLATION __________________________________________________ 12

CONFIGURATION ________________________________________________ 13

OVERVIEW ___________________________________________________________13

Configuration via HTTP/HTTPS _____________________________________________ 13

Configuration via USB ____________________________________________________ 14

Configuration via SSH ____________________________________________________ 14

CONFIGURATION MENU DESCRIPTION ________________________________________15

- 5 -

Start menu ______________________________________________________________ 15

Setup __________________________________________________________________ 17

IP config________________________________________________________________ 18

WEB CONFIGURATION____________________________________________ 19

Network configuration ____________________________________________________ 20

Device configuration______________________________________________________ 21

Data log ________________________________________________________________ 22

UDP Firewall ____________________________________________________________ 23

Wake on Lan address_____________________________________________________ 24

SNMP __________________________________________________________________ 25

MODBus/BACNET________________________________________________________ 26

JSON __________________________________________________________________ 27

Syslog configuration _____________________________________________________ 28

Date & Time configuration _________________________________________________ 29

NTP & Timezone configuration _____________________________________________ 30

Email configuration_______________________________________________________ 31

Email logic______________________________________________________________ 33

GSM Modem ____________________________________________________________ 34

Sensors ________________________________________________________________ 35

Sensors Config __________________________________________________________ 36

Password recovery_______________________________________________________ 38

Wi-Fi setup (optional card required) _________________________________________ 39

Expert mode ____________________________________________________________ 40

CONFIGURATION OF SEVERAL DEVICES _______________________________________40

FIRMWARE UPGRADE ____________________________________________ 41

FIRMWARE UPGRADE VIA HTTP ____________________________________________41

FIRMWARE UPGRADE VIA FTP _____________________________________________41

SNMP CONFIGURATION___________________________________________ 42

MODBUS TCP/IP PROTOCOL_______________________________________ 44

BACNET/IP CONFIGURATION ______________________________________ 48

SERIAL PORT CONFIGURATION____________________________________ 50

TECHNICAL DATA________________________________________________ 51

NETWORK CABLE ______________________________________________________51

OPERATING AND STORAGE CONDITIONS_______________________________________51

- 6 -

DESCRIPTION

OVERVIEW

NetMan 204is an accessory that allows device management through a LAN (Local Area Network);

the accessory supports all the main network protocols (SNMP v1, v2 and v3, TCP/IP, HTTP and

MODBUS) and is compatible with Ethernet 10/100Mbps IPv4/6 networks. The device can therefore

be integrated easily into medium and large-sized networks.

NetMan 204 also records device values and events in the history log archive and can manage

optional environmental sensors (not supplied with the device, but provided separately)

PACKAGE CONTENTS

NetMan 204

USB cable

Quick start

- 7 -

FRONT PANEL

A: Network port

B: Led

C: Reset button

D: Micro-USB port

E: Serial port

Network port

NetMan 204 connects to 10/100 Mbps Ethernet networks by means of connector RJ45. The LEDs

built into the connector describe the status of the network:

Left LED

SOLID YELLOW: NetMan204 has detected a valid link.

FLASHING YELLOW: NetMan204 is receiving or transmitting data packets.

Right LED

SOLID GREEN: NetMan204 is connected to a network operating at 100 Megabits per second.

Micro-USB port

NetMan 204 makes available an USB communication port through which it is possible to configure

it (see paragraph “Configuration via USB”).

Serial port

NetMan 204 makes available a serial communication port to which you can connect environmental

sensors (not supplied with the device, but provided separately).

LED

This led describes the status of NetMan 204:

SOLID RED: NetMan 204 is not communicating with the device (verify PRTK Code).

FLASHING RED: the DHCP server does not have assigned a valid IP address to NetMan 204.

OFF: regular working.

- 8 -

GSM Modem

NetMan 204 can send a notification SMS if one or more alarm conditions occur. The SMS can be

sent to up to three recipients and they can be sent for seven different kinds of alarm.

An external GSM modem (optional accessory) and a SIM card are required. For more details, see

paragraph “GSM Modem”

Reset button

The reset button allows to restart the NetMan204 or to load a default configuration with a

predefined static IP address.

To reset NetMan204: keep press the reset button until the red led start flashing (ca. 2 seconds)

and then release it.

To load a configuration with predefined static IP address: keep press the reset button; first the

led starts flashing, then turns to solid red (ca. 10 seconds). When the led is solid red, release the

reset button and the NetMan 204 will reboot with:

IP address: 192.168.0.204

Netmask: 255.255.0.0

SSH service enabled

HTTP service enabled

HTTP and SSH service are enabled temporarily without changing the configuration saved

in non-volatile memory.

USERS

It is possible to access to NetMan 204 with three different users (admin / fwupgrade / user).

Username

Default password

Privileges

admin

user with right to modify the configuration

fwupgrade

user with right to upgrade the firmware

user

user with right to read and download the log files

- 9 -

NETWORK SERVICES

NetMan 204 implements a series of services based on the main network protocols. These services

can be activated or deactivated according to requirements (see paragraph “Configuration”). A brief

description for each of these is given below.

SSH

By means of a SSH client (available on all the main operating systems) a remote connection with

NetMan 204 can be established to change its configuration (see paragraph “Configuration via

SSH”).

Serial network

To emulate a point-to-point serial connection through the network (TCP/IP protocol) in order to use

special function service software.

Wake-on-LAN

NetMan 204 can send “Wake-on-LAN” command for remote computers boot.

HTTP

Using the HTTP (Hyper Text Transfer Protocol), is possible to configure the NetMan 204 and the

status of the device can be monitored by means of a web browser without having to install

additional software. All the most popular web browsers are supported; only most recent version of

browsers are supported.

SNMP

SNMP (Simple Network Management Protocol) is a communication protocol that allows a client

(manager) to make requests to a server (agent). NetMan 204 is an SNMP agent.

To exchange information, manager and agent use an addressing technique called MIB

(Management Information Base). There is a MIB file for each agent, defining which variables can

be requested and the respective access rights. The agent can also send messages (TRAP) without

a prior request from the manager, to inform the latter of particularly important events. SNMPv3 is

the evolution of SNMP and introduces new important features related to security.

UDP

UDP (User Datagram Protocol) is a low level network protocol that guarantees speed in the

exchange of data and low network congestion. It is the protocol used by the UPSMon software for

monitoring and control of the device.

The UDP connection uses the UDP 33000 port by default but can be configured on other ports

according to requirements.

- 10 -

Modbus TCP/IP

The device status can be monitored by means of the standard network protocol MODBUS TCP/IP.

Modbus TCP/IP is simply the Modbus RTU protocol with a TCP interface that runs on Ethernet.

BACnet/IP

The device status can be monitored by means of the standard network protocol BACnet/IP.

BACnet (Building Automation and Control networks) is a data communication protocol mainly used

in the building automation and HVAC industry (Heating Ventilation and Air-Conditioning).

FTP

FTP (File Transfer Protocol) is a network protocol used for file exchange. NetMan 204 uses this

protocol for:

1. download of files of the device values and events history log archive (Datalog and Eventlog);

2. download and upload of configuration files;

3. firmware upgrade.

In both cases a client FTP is required, configured with these parameters:

Host: hostname or NetMan 204 IP address;

User: see chapter “Users”;

Password: current password.

The connection can also be established using a web browser (all the most popular web browsers

are supported), by inserting the hostname or IP address of the NetMan 204.

Syslog

Netman 204 can send events to a syslog server over UDP. This service allow to centralize the log

of the IT infrastructure on a single server, in order to have them consumed on the preferred way.

NetMan 204 can send a notification e-mail if one or more alarm conditions occur. The e-mails can

be sent to up to three recipients and they can be sent for seven different kinds of alarm.

SMTP (Simple Mail Transfer Protocol) is the protocol used to send the e-mails. The port is

configurable. For more details, see paragraph “Configuration”

Reports

NetMan 204 can send periodic e-mails with an attachment containing the files of the device values

and events history log archive.

This service can be used to periodically save the history log archives.

The “Email” service must be enabled in order to send reports; the reports are sent to all the

addresses configured for this service (for more details see paragraph “Configuration”).

Altri manuali per NetMan 204

Indice

Altri manuali Riello UPS Scheda di rete

Riello UPS

Riello UPS Netman204 Manuale utente

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente