rlon L1 Manuale utente
L1
loor lamp
rlon
3
L1 is about reduction to the essential.
A pure line, leaning modestly against the wall.
It can be touched anywhere.
A gentle click reveals its light.
Though the interface remains invisible.
L1 is a sculpture – from the outlet to the illuminant.
L1 is a sculpture – from the way you interact with it.
5
congratulations
on your L1 loor lamp
This guide provides you with instructions on how to setup
and maintain your lamp as well as safety notes and legal
informations.
6
body
dimensions 1750 x 25 x 25 mm
power supply
wattage 7 w
voltage 220 v
cable length 3 m
illuminant
LED warmwhite
luminous lux 700 lm
colour rendering 85 ra
wattage 7 w
light temperature 3000 k
technical details
7
1750 mm
25 mm
25 mm
8
usage instructions
The following instructions apply both for the irst setup of
the lamp and a later maintenance.
Caution: Before installing and whenever
maintaining the lamp, ensure that the power line is
disconnected!
Attention: The L1 lamp can only run with a
grounded power outlet. Please make sure your
power connection provides a grounding.
Please be careful when children are present.
Bumping into the lamp may cause the lamp to fall
and cause injury.
9
10
setup
The touch sensor of the L1 lamp calibrates automatically
whenever the device gets connected to the power line.
To ensure the sensor works properly the lamp might not
be touched while inserting the power plug and and for 4
seconds after that.
sensor reset
In case the sensor function is impaired, please unplug the
device and wait for 4 seconds before you plug it in again
without touching the housing.
Indice
Altri manuali rlon Illuminazione domestica
