RMS MARLEY Manuale utente

Thompson House

Unit 10 Styles Close, Sittingbourne, Kent,

ME10 3BF

Tel: 01795 477280 Fax: 01795 229692

E-mail address: [email protected]

ATTACH COPY OF

SERIAL NUMBER LABEL HERE

The

Stroller

The

Stroller

USER MANUAL

Edition 1 —2017

Standard Features include:

 Available in two sizes.

Tilt-in-Space from 15° to 50°.

Depth adjustable Seat.

Width adjustable Pelvic Supports.

Height adjustable Footplate.

Height adjustable Push Handles.

Padded Pelvic Belt.

Washable Upholstery.

Quick-release Rear Wheels.

PU puncture-proof Tyres.

Shopping Basket.

The

Stroller

WARRANTY STATEMENT

Every effort is made by RMS Ltd., to ensure that your marley Stroller is

manufactured to the highest standards.

The supply of our quality products is backed by the company’s ISO 9001 –2015

Quality Management System and CE Marking declaration.

The marley Stroller is supplied with a manufacturer’s warranty covering faulty

materials or workmanship. The frame is warranted for a period of 24 months with

all other components, including accessories, warranted for a period of 12 months.

The warranty period commences from the date of dispatch from our factory.

In the unlikely event of a warranty claim being necessary, the failed part must be

returned to your supplier.

The failed part may then be repaired or replaced at the manufacturer’s discretion

or that of their appointed supplier. In the latter case, any displaced parts must be

returned to the manufacturer for inspection.

Any component or accessory repaired or replaced during the 12 month warranty

period, will continue to be covered for the balance of the warranty period only.

As unusually high rates of wear on this device or its ancillary parts may be caused

by the user’s clinical condition, the manufacturer may consider this to be beyond

its control. Therefore, items such as upholstery, wheels and tyres, may only be

considered for repair or replacement under the terms of the product warranty,

where a failure is clearly attributed to a manufacturing or material defect.

Any attempt to change the design or modify the construction of the marley

Stroller in any way, will invalidate the product warranty and the manufacturer’s

CE marking declaration.

RMS Ltd. reserves the right to change without notice, the design, methods of

manufacture, or any materials used in the construction of the marley Stroller ,

where it considers such changes will serve to improve the product quality, or

become necessary to meet any changes in device legislation.

July 2017

INTRODUCTION

RMS Ltd would like to thank you for choosing a marley Stroller.

The marley Stroller is intended for indoor and outdoor use, with a maximum

occupant weight of 35Kg. (5.5 stones).

To ensure the end user has a safe and reliable product, the marley Stroller has

been successfully tested to all applicable parts of ISO 7176.

CONTENTS

Technical Data .................................................................. 4

Component Plan .............................................................. 5

Safety Guidelines ............................................................. 6/7

Folding and Unfolding ..................................................... 8

Brake Operation .............................................................. 9

Quick Release Rear Wheels ............................................. 9

Tilt—in—Space Operation ............................................... 9

Transportation Information ............................................. 10

Seat Depth and Pelvic Support Width Adjustment ......... 11

Footrest Adjustment ........................................................ 11

FITTING OPTIONAL ACCESSORIES

Abductor (Pommel) ......................................................... 12

Back Extender .................................................................. 13

Lateral (Thoracic) Supports Adjustment .......................... 14

Harness ............................................................................ 15

Upholstery Care and Cleaning ......................................... 16

Product Maintenance and Inspection Record ................. 17

Warranty Statement ....................................................... 18

TECHNICAL DATA

SIZE 1 SIZE 2

MIN MAX MIN MAX

Seat Width

(with Pelvic Supports fitted)

200

270 260 320

Seat Depth 230 280 290 350

Seat to Floor Height (upright position) 490 520

Backrest Height (from Seat Base) 510 570

Backrest Height with Back Extender

(from Seat Base)

625 720

Thoracic Support Widths

(when fitted)

120 210 170 240

Thoracic Support Height

(from Seat Base)

150 340 160 430

Footplate Height 130 280 125 330

Footplate Depth 160 180

Push Handle Height (from floor) 910 1250 925 1270

Tilt—in–Space range 15° 50° 15° 50°

Overall Width 580 640

Overall Depth 790 820

Overall Backrest Height from floor

with Back Extender

1070 1160

Standard Buggy Weight (Approx) 14.0Kg 16.0 Kg

Folded dimensions L x W x H 800x590

x500

810x630

x500

Maximum User Weight 35Kg 35Kg

Specifications are in METRIC unless otherwise stated.

PRODUCT MAINTENANCE

For safety and security, it is recommended that all components of the marley

Stroller be checked for wear and security at regular intervals.

Inspection frequency should be increased accordingly for heavy users.

Any defects should be reported to the appropriate authority, with any repairs

being carried out using genuine original equipment replacement parts, available

direct from RMS Sales.

(Also refer to Upholstery Maintenance section).

INSPECTION RECORD

SERIAL NUMBER

The marley serial number is located on the underside of the Seat Panel.

This User Manual relates to the marley Stroller detailed on the back page.

Should the reader have any concerns regarding the use of the marley Stroller,

please contact your supplier in the first instance.

DATE INSPECTED BY COMMENTS SIGNED

UPHOLSTERY CARE and CLEANING

General Fabric Care

 Use of a vacuum cleaner or soft brush to remove dust and solid particles,

together with frequent wiping with a damp cloth, will to help to maintain the

appearance of the fabrics.

 Spillages should always be removed as quickly as possible with an absorbent

dry cloth.

 Minor Soiling can normally be removed with a clean damp cloth.

 Water Based Stains can be cleaned using mild liquid detergent with warm

water. Use cold water for stains produced by bodily fluids, then rinse

thoroughly, followed by drying with a clean absorbent cloth.

 With the marley vacated, Light Steam Cleaning can be carried out in situ,

ensuring all areas are completely dry before reuse.

NOTES:

 All soap residue must be thoroughly rinsed out from all fabrics, as it can attract

further stains.

 All stains caused by bodily fluids should be removed immediately.

 As with all fabrics, stains that are left in situ for over 24 hours, will have set and

will become increasingly difficult to remove.

COMPONENT PLAN

Tilt-in-Space

Control Lever

Lateral Supports

(Optional

Accessory)

Height adjustable

Push Handle

Width adjustable

Pelvic Supports

Padded Backrest

Height adjustable

Footplate

Front and Rear

Tie-Down Points

Depth adjustable

Seat Base with

padded Upholstery

Shopping

Basket

PU Puncture-

proof Tyres

Quick-release

Rear Wheels

Padded

Pelvic Belt

Frame Folding

Lock Release

Independent Foot-operated

Parking Brakes

SAFETY GUIDELINES

Due to the various activities a Stroller user and their carer may have to perform,

RMS Ltd recommends that prior to issuing the marley Stroller, this manual be

studied by all relevant persons, to ensure that all instructions, procedures and

warnings are carefully observed and understood.

IMPORTANT NOTES:

1/ The marley Stroller is equipped, as standard, with a Shopping Basket, the

straps of which are integral to the frame. Therefore the Shopping Basket should

only be removed for cleaning purposes.

2/ Care must be taken to avoid finger trapping or possible injury when

lifting, folding or unfolding the marley. Also ensure children are clear

of any moving parts when folding or adjusting the Stroller.

 For correct support and user comfort, it is strongly recommended that any

adjustments necessary affecting the user’s postural positioning, should be

carried out by a suitably qualified person at or before the final hand-over.

 The final Hand-over should also include passing this manual over to the carer.

 The maximum occupant capacity of the marley Stroller is 35Kg (5.5 stones).

 Where the large tilt range of the marley is to be used to the extreme, a

suitable stability test with the intended user may be necessary, prior to final

commissioning.

 After the marley seating system has been initially adjusted to suit the

intended user, any settings should not be affected subsequently, by the folding

of the stroller. However, care should be taken not to impact adjustable

components whilst folding or in the folded position.

 To accommodate any changes in user growth or postural positioning, it is

recommended that the marley and user be checked at regular intervals by a

suitably qualified person, to ensure that adjustable components are correctly

set to suit the user’s current requirements.

 Carers should ensure correct utilisation of any positioning belt or harness, as

failure to do so could result in injury to the user. It is recommended that any

postural belts or harnesses being used, are the first items to be secured when

the user enters the seat and the last items to be released before exiting.

 DO NOT park the marley close to sources of excessive heat or naked flames.

HARNESS

No Tools Required:

IMPORTANT NOTE: The marley Harness is intended for postural support

only. UNDER NO CIRCUMSTANCES SHOULD IT BE USED AS THE SOLE METHOD OF

RESTRAINT DURING TRANSPORTATION IN A MOTOR VEHICLE.

The backrest upholstery has not only been designed to offer comfort and support

but also ease of Harness installation.

Having the intended user seated, will assist with establishing the most suitable

mounting positions for the upper Harness straps.

Pre-formed slots have been created during the upholstery production, to enable

the upper Harness straps to be easily fed through to the rear of the backrest panel.

 Remove and save the tri-glides placed on the upper and lower Harness straps

during production, before commencing this installation.

 Pass both ends of each upper Harness strap through the appropriate pre-formed

slots in the Backrest upholstery, then through the corresponding slots in the

Backrest Panel.

 The lower straps can be routed directly between the Seat Cushion and Backrest

upholstery, continuing through the lower mounting slots in the Backrest Panel.

 Re-install tri-glides onto all the straps and secure as shown below to prevent the

straps from pulling back through.

 Correct positioning of the harness panel can be achieved by a combination of

upper and lower strap adjustments both at the rear tri-glides and upper harness

cam-lock buckles.

 Detach the Harness Centre Panel from it’s straps via the buckles, to allow the

user to enter or exit the marley.

Upper Harness

strap attachment

Lower Harness

strap attachment

Pre-formed slots for

upper Harness straps

LATERAL SUPPORTS

Lateral Supports supplied with screws and fixings.

Tools Required: 10mm Spanner.

NOTE:

The Lateral Supports are handed by virtue of a small recess in the rear of each

side support pad panel. This recess is to assist with retaining the pad and should

always be located at the top.

 Partially separate the backrest upholstery from the backrest panel, sufficient to

gain access to the relevant mounting slots for the Lateral Supports.

 Whilst holding each Lateral Support in position against the backrest panel, with

the recess at the top, insert two M6 Carriage Bolts through the Support bracket

from the front, then through the backrest panel and secure at the rear using the

M6 nuts and washers supplied.

 Refit and secure the backrest upholstery around the Lateral Supports as below.

 Position the Lateral Supports to suit the user’s requirements and finally secure

sufficiently to prevent any movement.

Front view of

Lateral Supports

and adjustments

Rear view of

Lateral Supports

and fixings

Backrest upholstery fitted

around the Lateral Supports

 Worn or damaged upholstery can lead to hygiene contamination, cause injury

to the user and, in some cases, fail to support the user correctly. Regular

inspections of all upholstery should be made and any defects should be rectified

as soon as possible.

 Ancillary devices, such as the headrest, positioning belt, harness or pommel

should always be checked for security and positioning on a daily basis.

 The parking brakes should always be applied whenever parking the marley,

before attempting to transfer the occupant, or making any adjustments.

 Never leave the marley parked unattended or on a slope, with the occupant

seated.

 Objects should never be suspended from the push handle, as this could

seriously affect the overall stability of the marley.

 Regular inspections of the buggy should be made and any defects reported to

the relevant authority for rectification as soon as possible.

NOTE: Any reference to Left or Right in this manual, will refer to the Left or

Right side when sitting forward facing in the seat unit.

FOLDING the marley

Before folding the marley, apply both Parking Brakes and fold the footrest

upwards against its support panel. While holding the push handle, release the

seat locking mechanism (step 2), then push the push handle forwards until the

marley folds down flat (step 3).

The push handle may also

be folded downwards

against the backrest if

required, (step 3).

UNFOLDING the marley

After raising the push handle to the vertical position,

grasp the marley as shown below (step2). Whilst

pulling the push handle towards you, push the centre

area away from you until the marley opens out as

step 3.

NOTE: With the marley fully unfolded, the seat

locking mechanism is designed to engage automatically. This can be confirmed by

checking that both RED lock buttons are in line with the RED LOCK lines as shown

and then by lightly rocking

the push handle backwards

and forwards.

Step 1

Step 2 Step 3

Compress both RED

buttons to unlock

Step 3

Step 2

Step 1

BACK EXTENDER

Back Extender is supplied with fixings.

Tools Required: 10mm Spanner.

 Unfasten the top of the backrest

upholstery and temporarily fold forwards.

This will expose two mounting holes at

the top of the backrest panel.

 From the front of the backrest panel,

insert both M6 Carriage Bolts supplied

and loosely install the M6 nuts and

washers at the rear of the backrest panel.

 Slide the Back Extender downwards over

the front face of the backrest panel,

ensuring both slots engage under the

heads the Carriage Bolts.

 With the back extender correctly engaged

at the required height, finally tighten both

nuts sufficient to prevent any movement.

 Re-attach the backrest upholstery around

the Back Extender.

Fixings

FITTING OPTIONAL ACCESSORIES

Pommel

Pic

ABDUCTOR (Pommel)

Abductor supplied with fixings.

Tools Required: 10mm Spanner and 4mm Hexagon Key

 Locate the two pre-drilled mounting holes at the front of the seat panel.

 Using the M6 Carriage Bolts, nuts and washers supplied, attach the mount to

the buggy seat and tighten sufficient to prevent any movement.

 To insert the abductor, depress the pop-pin and push downwards until the pin

locks at the bottom of the mount. To remove the abductor, depress the pop-

pin and lift clear.

FRONT

Pop-Pin

BRAKE OPERATION

The marley Parking Brakes are easily foot operated as below.

Always apply both Brakes before making any adjustments, even on level ground.

Ensure both Brake Levers are fully raised to the “OFF “ position before moving off.

QUICK RELEASE REAR WHEELS

To reduce it’s over-all weight and/or for easier storage, the marley is equipped

with Quick-release rear wheels. After removing the occupant, set the brakes to

the OFF position before removing each wheel by depressing the spring retaining

clip in the centre of the wheel as

indicated.

To refit each wheel, depress the spring

retaining clip and slide the wheel Fully

and Firmly onto it’s axle before

releasing the retaining clip. Carefully

check to ensure both wheels are

locked in place before moving off.

TILT-IN-SPACE OPERATION

The Tilt Control lever is mounted on the Push

Handle, enabling convenient and easy

operation of the seat tilt from 15° to 50°.

To re-position the seat, operate the lever and

either push down or raise the push handle

until the required amount of tilt is achieved,

then release the lever to lock the seat in

position.

After setting the tilt angle, it may be necessary to re-adjust the Push Handle height.

This can be done easily by depressing both black locking buttons shown above

simultaneously and raise or lower to the required position.

Brakes ON Brakes OFF

Wheel Retaining Clip

Tilt-in-space Control

Height adjustable

lock buttons

TRANSPORTATION

The marley Stroller has been successfully tested to ISO 7176-19

(Wheeled mobility devices for use in Motor Vehicles)

Using a P10—32Kg Test Dummy.

The restraint systems used for the Occupant and Stroller during the

above testing are available from:- Unwin Safety Systems.

Tel: 01935 827740 Fax: 01935 827760

Email: [email protected]o.uk Web: www.unwin-safety.com

Part numbers:- Stroller Tie-downs: Front—OF03 Rear—OR02

Occupant restraints: OCR02

NOTE: Installation and use of all transportation restraint systems should always be

strictly as per the manufacturers recommendations.

IMPORTANT NOTES:

 THE marley Stroller and OCCUPANT MUST ONLY BE TRANSPORTED IN THE

FORWARD FACING, FULLY UPRIGHT POSITION.

 THE STROLLER RESTRAINTS MUST ONLY BE ATTACHED TO THE TIE-DOWN

POINTS INDICATED BELOW.

 ENSURE BOTH STROLLER BRAKES ARE APPLIED BEFORE COMMENCING YOUR

JOURNEY.

 DO NOT TRANSPORT THE marley Stroller WITH THE SHOPPING BASKET

REMOVED.



When a child of mass less than 22 kg is to be transported in a road vehicle, it

is recommended that they be transferred from their wheelchair to a UNECE

Regulation 44 compliant child restraint system.

Rear Tie-down

points

Front Tie-down

points

SEAT DEPTH and PELVIC SUPPORT ADJUSTMENT

Tools Required: 10mm Spanner.

 Detach and remove the seat cushion.

 Raise the footrest and seat panel as an assembly to gain access to the underside

of the seat.

 Slacken all four screws sufficient to be able to reposition the upper seat panel.

 Check the pelvic support positions and reposition as required before

retightening all four securing screws sufficient to prevent any movement.

 Replace the seat cushion.

FOOTREST HEIGHT ADJUSTMENT

Tools Required: 10mm Spanner

 Slacken both footrest height

adjustment screw lock nuts, located at the

rear of the footrest support panel, then

slacken both screws.

 Raise or lower the footrest to the

required position, then retighten both

screws and lock nuts sufficient to prevent

any movement.

Seat adjustment Screws

Footrest height

adjustment screws

Indice

Altri manuali RMS Passeggino

RMS

RMS SHUTTLE DISCOVERY Manuale utente

Manuali Passeggino popolari di altre marche

Hauck

Hauck Priya Trioset Manuale utente

CHILDHOME

CHILDHOME CWQDN Manuale utente

Dreamer Design

Dreamer Design Rebound GST Manuale utente

Britax

Britax STEELCRAFT AGILE Manuale utente

Graco

Graco 7427 Manuale utente

Comfort

Comfort COMPASS Manuale utente

OBaby

OBaby Aura Manuale utente

Tutek

Tutek Tirso Manuale utente

Babify

Babify Dual Plus Manuale utente

Graco

Graco Stroller Manuale utente

Special Tomato

Special Tomato Jogger Manuale utente

Chicco

Chicco CORTINA TOGETHER TWO-PASSENGER STROLLER Manuale utente

Otto Bock

Otto Bock Kimba neo Manuale utente

Milly Mally

Milly Mally ROYAL Guida rapida

Hauck

Hauck DUETT 3 PRAM Manuale utente

BOB

BOB DUALLIE Manuale utente

Nuna

Nuna Pepp Manuale utente

Britax

Britax B2 Manuale utente