Roadview RV-330LB Manuale utente
※Safety precautions included in this manual are intended to ensure your safety and prevent property damage.
Read them carefully before using the product.
※The product's functions and design features may change without prior notice for quality and functionality improvement purposes.
RV-330LB
Precautions
☞Whenever you change the mounting position of the product, adjust the camera angle and check the video recording to ensure
accurate video capturing.
☞Excessively dark window tinting can hinder normal video recording.
☞Use the power cable provided by the manufacturer to ensure normal functionality.
☞Viewing or operating the product while driving can lead to an accident. Use the product only while the vehicle is stationary.
☞This product's cameras may not be able to record smooth images in the event of a sudden change in the brightness level
(such as when entering a tunnel) or under extreme conditions such as shooting directly into the midday sun and shooting in the
darkness of the night with no sufficient light sources in the vicinity.
☞Certain impact events may not be severe enough to trigger video recording.
☞In the event of an accident, images may not be recorded if the product has been damaged or the power supply has been disrupted.
☞Product damage due to an accident or any other cause may result in failure to record video data and/or file errors.
☞Unauthorized disassembly, repair, and modification of the product may lead to product damage and/or malfunction.
The consumer is solely responsible for any product defect or issue arising thereof.
☞Liquids and metallic objects entering inside the product can pose electric shock, fire, and electric leakage hazards. If this occurs,
turn off the product, unplug the power cable, and contact the service center.
Proper Product Use
☞ Insert/remove the micro SD card only after powering the main unit off. Inserting/removing the micro SD card while the unit is
powered on can cause serious errors. In addition, removing the micro SD card while recording is in progress can corrupt recording
data and damage the card itself.
☞ Format the micro SD card and perform a virus check at least once a week to prevent potential data recording failures.
☞ Use authorized micro SD cards only.
☞ The warranty period is 3 months for the micro SD card, 6 months for the accessories, and 1 year for the main unit.
☞ Using a micro SD card that contains existing data can lead to errors. Delete all existing data before use.
☞ Frequently check the recordings and format the micro SD card at least once a week (File System: FAT32/32bit).
☞ Replace the micro SD card if it is not recognized when connected to a computer or cannot be formatted properly.
☞ Using a micro SD card that contains existing data can lead to errors. Delete all existing data before use.
☞ The manufacturer claims no responsibility for data stored on to the micro SD card.
☞ Regularly check the data stored on the micro SD card and the internal memory to ensure normal recording performance.
This product has been designed as an in-vehicle recording device. Do not use for purposes other than as intended.
The manufacturer is not responsible for any product defect or issue resulting from negligent use or care of the product
by the consumer.
Proper micro SD Card Use
After unpacking the product, check inside and make sure all accessories are included. (Refer to images below)
If the product or any of its accessories is damaged or defective, please contact your retailer. (Actual components may differ from the
images below.)
※Actual components may differ from the images above.
Accessories described in this manual are subject to change without prior notice for quality improvement purposes.
※The external GPS module is sold separately and is available for purchase at your retailer.
Main Unit Rear Camera & Extension Cable
Constant Power Cable Cigarette Jack Cable
or
Power Cable
Accessories
micro SD Card micro SD Card Adapter Clips Quick Guide
Product Overview
Main Unit
Power Cable Connector
Rear Camera Connector
External GPS Antenna
Connector
Debugging Port
Servicing Port (do not
open.)
Reset Button
If the black box becom
es unresponsive during
use, press this button
to reboot the device.
Micro SD Card Sl
ot
Status LED
Blue
Recording LED
Red
Power/Manual Recording Button
Press and hold to turn the power o
n/off.
Short press to start manual recordin
g.
Security LED
Flashing
security indicat
or.
Built-In Microphone
# The actual component may differ from the images above.
Product Overview
Rear Camera Specifications
Rear Camera
Mount
Lens
Effective Pixels 640×480
Power DC 5V
Viewing Angle Approx. 120°
Operating Temperature -20℃~+60℃
Installation
[Correct Installation Angle]
1/3 of Vertical Space
2/3 of Vertical Space
¾= Dynamic Area
¼= Fixed Area
Distant Area
[Screen Ratio: Correct Installation Angle]
[Incorrect Installation Angle]
Distant Area
Dynamic Area
2/3 of Vertical Space
1/3 of Vertical Space
[Screen Ratio: Incorrect Installation Angle]
Product Use
[Front/Rear Preview]
∙ Tap ①to bring up the menu. The screen automatically reverts to
recording mode after 10 seconds of inactivity.
∙ Tap ②to flip between front and rear camera feeds.
Caution)
If a micro SD card has not been inserted, the screen will not turn on. Instead, the black box will repeatedly ask you to
Check the micro SD card. The black box will function normally once a micro SD card has been inserted.
If you receive the same message even with a micro SD card inserted into the black box, try removing the card and inserting it again.
If the problem persists, replace the micro SD card or contact the service center.
①
②
①Infinite/Parking Mode Selection
②Video Recording Playback
③Volume Adjustment (0 - 5)
④Settings
⑤Parking Mode Event Count
⑥GPS Status
⑦Software Version
⑧Time & Date
Displays retrieved time and date when connected to GPS.
Displays the system's time and date when not connected to GPS.
(System time and date can be configured under Settings.)
⑨LCD Off
Tap on the LCD screen to turn the screen back on.
Menu
Menu
[Terminology]
∙Infinite: Captures 1-minute recordings while the vehicle is on the move.
∙Parking Event: Starts to record whenever impact is detected while the vehicle is parked (20 seconds leading up
to and 20 seconds after the impact).
∙Parking Infinite: Captures 1-minute recordings while the vehicle is parked.
∙Manual: Manual recording initiated by the user.
①②
③④
⑤⑥
⑦
⑧
⑨
Channel
∙Choose between Front/Rear and Front.
∙Front/Rear: Displays video feeds from front and rear cameras on a single screen.
Front camera feed takes up the bulk of the screen, with the rear camera feed shown as a
small window on the upper right corner. Tap on the PIP window to flip between
the channels. (For more information, refer to "Front/Rear Preview" section on page 6.)
∙Front: Displays video feed from the front camera only (full screen). Video from the
rear camera is not recorded.
Settings_Video & Channel
Video
∙Choose the desired picture quality (High, Medium, Low).
∙"High" produces the best picture quality at the cost of recording capacity, whereas
"Low" increases the recording capacity at the cost of picture quality.
∙Once the recording capacity of each type of recording data is reached, oldest data is
overwritten with new data. Back up the recording data on to a separate storage device
on a regular basis.
LCD Off
∙ Configure LCD timeout.
∙ Tap on the LCD Off icon to cycle through 30 secs, 1 min, 5 mins, Clock, and Always On
in that order. The LCD automatically turns off after the specified amount of time.
To turn the LCD back on, simply tap on it.
∙ "Clock" displays a clock instead of a blank screen after 1 minute of inactivity.
Settings_Sensitivity & LCD Off
Sensitivity
Caution)
∙"Very High" is so sensitive that the black box can recognize bumps on the road or even
loud noises from inside the cabin as event recording triggers. If this occurs, try lowering
the sensitivity setting.
∙"Off" instructs the black box not to initiate event recording even if actual impact has been
registered. Remember this before using the "Off" setting.
(In Parking mode, event recording will still take place even if Sensitivity is set to "Off”)
∙Adjust the impact sensor sensitivity.
∙Tap on the Sensitivity icon to cycle through Off, Low, Normal 1, Normal 2, Normal 3, High,
and Very High in that order.
∙Impact registration above the specified sensitivity setting while the vehicle is on the move
or parked triggers event recording.
Indice
Altri manuali Roadview Telecamera da cruscotto
