Rosewill RC-20001 Manuale utente

Thank you for purchasing a Rosewill Ethernet Network Card.

Please read the instruction manual before use and retain for future reference.

RC-20001

INTRODUCTION

1.1 Product Introduction

The PCIe 2.5G Network Adapter supports data rate up to 2.5Gbps. It

will increase business efciency by increasing the network speed and

greatly reduce le transfer time between networked devices in a home

environment, where video streaming over the network is becoming

commonplace.

1.2 Features

• Supports PCI Express 2.1

• Supports 10/100/1000/2500 Mbps Ethernet

• Support Wake On Lan (WOL) power management

• Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

• LEDs indicate the status of including Link/Activity

• Up to 16K jumbo frame support

• Feature full duplex mode that doubles the network connections speed

1.3 Systems Requirements

Operating systems supported are (both 32 and 64 bits)

• Windows 7/8.x/10

• Windows Server 2008 R2/2012R2/2016

• Linux 4.x or later

1.4 Package Contents

• 1 x PCIe 2.5G 4-Speed Multi-Gigabit Network Adapter

• 1 x Driver CD

• 1 x User Manual

GETTING STARTED

2.1 Hardware Layout

Link/Activity Indicator:

• When the LED is off, there is no link between the PCIe 2.5G 4-Speed

Multi-Gigabit Network Card and the network.

• When the LED is on, a link is established, but there is no trafc on the

network.

• When the LED is ashing, there is trafc on the network to which the

PCIe 2.5G 4-Speed Multi-Gigabit Network Card is connected.

2.2 Hardware Installation

1. Turn off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with the

selected PCIe slot on the motherboard. Push the board down rmly.

5. Replace the slot bracket’s holding screw to secure the card.

6. Secure the computer cover and reconnect the power cord.

10/100/1000 M

Link/Activity Indicator

2.5 G Link/Activity Indicator

2.3 Driver Installation

The following section shows you how to install PCIe 2.5G 4-Speed Multi-

Gigabit Network Card driver on different operating systems.

2.3.1 Installation for Windows

1. Insert the provided CD into your disk drive. The CD-ROM will start

automatically. The following screen will show up and please click “Install

Driver”.

Note: If the install program doesn’t run automatically, please locate and

double-click on the Autorun.exe le in the CD to launch the install

program.

*Note: Actual image may vary

2. Please click “RTL PCIe” to start the installation.

3. Select the required system and click the button.

4. Follow the instructions on screen to install the driver.

*Note: Actual image may vary

2.3.2 Installation for Linux

1. Insert the provided CD into your CD-ROM drive.

Extract the compressed driver source le to a certain directory by the

following command: (Please copy the driver le “r81xx-x.xxx.xx.zip”

from the CD folder

“.\ Driver\RTL PCIe\Linux” to a certain folder on hard drive)

a) # tar vjxf r81xx-x.xxx.xx.zip

Now, the driver source les should be extracted under the current

directory. Executing the following command to compile the driver:

b) # ./autorun.sh (as root or with sudo)

2.4 Verifying the installation

2.4.1 Verifying for Windows

1. Click on the “Device Manager” tab in the Windows Control Panel.

Start > Control Panel > Device Manager

2. Entry “Network adapters” item, and you can read four “Realtek PCIe

2.5GBE Family Controller” item in the Device Manager.

2.4.2 Verifying for Linux

1. You can check whether the driver is loading by using following

commands:

# lsmod | grep r81xx

# ifcong –a

If there is a device name, ethX, shown on the monitor, the Linux driver is

loaded. Then, you can use the following command to activate the ethX.

# ifcong ethX up, where X=0,1,2,…

TROUBLESHOOTING TIPS

• The computer can NOT detect the PCIe 2.5G 4-Speed Multi-Gigabit

Network Adapter.

1. Make sure that the PCI Express card is correctly plugged into the PCI

Express slot; if not, turn off the computer and plug it again.

2. If the PCI Express card is plugged in correctly, see if the golden

connectors on the card are clean; if not, clean the connector surface.

3. If still NOT, please change another PCI Express slot on your

motherboard.

4. Please upgrade your motherboard BIOS to the latest version. If it still

doesn't work, contact your motherboard vendor asking the advanced

supporting for BIOS updated.

5. The board itself might be defective. You can try another motherboard

testing PCIe 2.5G 4-Speed Multi-Gigabit Network Adapter working or

not.

• Computer failed to start after inserting the PCIe 2.5G 4-Speed Multi-

Gigabit Network Adapter.

Turn off the computer, remove the PCIe 2.5G 4-Speed Multi-Gigabit

Network Adapter, and try to restart the computer. If the computer starts

successfully, it means that the card has not been inserted into the PCI

Express slot correctly. Please clean golden gure by rubber rstly, then

change another PCI Express slot.

• I cannot use Gigabit Ethernet transfer speed.

1. Please afrm your Ethernet environment supporting Gigabit structure.

2. Please use CAT 6 UTP/STP cable.

RC-20001_A

Technical Support Information

[email protected] 1-800-575-9885

Please register your product at www.rosewill.com

for complete warranty information and support for

your product.

Indice

Altri manuali Rosewill Scheda di rete

Rosewill

Rosewill RNG-407-Dual Manuale utente

Rosewill

Rosewill N600PCE Manuale utente

Rosewill

Rosewill RC216 Manuale utente

Rosewill

Rosewill Network Card Manuale utente

Rosewill

Rosewill PCI 1394A Manuale utente

Rosewill

Rosewill PCIe LAN Card RC-401-Dual-EX Manuale utente

Rosewill

Rosewill RC401-EX Manuale utente

Rosewill

Rosewill RC-NIC416Dual Manuale utente

Rosewill

Rosewill RC403 Manuale utente

Rosewill

Rosewill RC-402 Manuale utente

Rosewill

Rosewill RC604 Manuale utente

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente