SAMSONIX PJ-180CM Manuale utente
Please read the manual carefully before installation and operation.
180°Super Wide Angle Multi-View Camera
14
25
36
Bu tton
Bu tton
WIRING DIAGRAM
180° SUPER WIDE ANGLE MULTI-VIEW CAMERA
a single button.
(via an extra keypad)
DISPLAY MODES
180 ° FULL VIEW MODE
130 ° REGU LAR VIEW MODE
Recommended for reversing straight
backwards.
Default mode.
TO P VIE W MODE
Recommended when approaching
a wall or a big standing obstacle.
ZOOM-IN CORNER VIEW MODE
Recommended only when reversing
towards a passage or there’s suspicious
obstacle at the corner.
TO P VIE W + REGULAR VIEW
CORNER VIEW + TOP VIEW
Recommended for reversing straight
backwards towards a wall.
Recommended only when reversing
in crowded surroundings.
MODE SETTING
There are 6 different display modes in the camera, and user can easily switch the mode
by pressing the button.
To avoid confusions due to unnecessary display mode switching, users are suggested
to select 2 - 3 preferred display modes and hide the unwanted modes. Switch to the
unwanted mode and then press the button and hold for 2 seconds (long pressing) to see
the mode disappeared. The setting is saved automatically for next time use. To have the
hidden mode back on display, you need press and hold the button while restarting power.
This operation reset all values back to default, so you will see all the 6 modes again.
INSTALLATION GUIDE FOR BRACKET-MOUNT CAMERA
1.Choose a flat position near license
plate light and make a small hole
for the first screw with a drill.
2. Use a screw driver to fix the first
screw (but not tightly).
4. Mark the position found for second
screw and make a hole with a drill.
5. Fix the second screw with a
screw driver.
3. Get the power/video cables connected,
and then adjust the camera properly to
find the best position for the other screw
according to the camera image in monitor.
Altri manuali SAMSONIX Telecamera da cruscotto
