Sangean DPR-36 Manuale utente
GB
DPR-36
1
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet. consult an electrician for replacement of the
obsolete outlet.
2
GB
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged. liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. To Reduce the Risk of Fire or Electric Shock, Do not Expose This Appliance To Rain or
Moisture.
16. The Shock Hazard Marking and Associated Graphical Symbol is provided on the bottom
panel of unit.
17. Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,
shall not be placed on the apparatus.
3
4
GB
Controls
1. Lock switch (Note: If this is activated the radio will not operate)
2. Headphone socket
3. Micro SD card socket
4. Telescopic antenna
5. LCD display
6. Loudspeaker
7. Power button
8. Volume Control
9. Band
10. Recording / Rewind button
11. Tuning/ Menu jog wheel
12. DC socket
5
Charging the radio
The DPR 36 features a built in 1800mAHLithium rechargeable battery to power the radio.
Before operating the radio for the rst time please fully charge the battery.
The DPR 36 is supplied with a 5V/500 mA AC adaptor.
1. Insert the adaptor plug into the DC socket on the right side of your radio. Plug the adaptor
into a standard mains outlet and the radio will begin charging the built in battery. Charging
time is approx. 4 hours with radio off and 10 hours with radio on. The battery power icon on
the LCD display will ash whilst charging and stop ashing when the radio is fully charged.
The battery run time is approx. 15 hours listening through the speaker and approx 18 hours
with headphones. Reduced power, distortion, ‘stuttering’ sounds or battery power indicator in
“low” are all signs that the battery needs to be recharged.
Note:
If charging the radio when the power is off, the battery power icon does not display on
the LCD.
6
GB
Headphones
The 3.5 mm stereo headphone socket located on the top of your radio is provided for use with
stereo headphones or an earpiece. Connecting headphones automatically mutes the built in
speaker.
Important:
Excessive volume levels from earphones and headphones may cause damage to your
hearing.
Setting the clock
The clock of DPR-36 will automatically update each time you turn on the radio and tune to a
DAB+ radio station or to an FM station which is broadcasting the time via RDS. Time display
will ash 00:00 for a few seconds then display the clock time when it receives DAB+ or FM –
RDS clock time signal.
7
DAB mode
Initial operation –DAB(Digital Radio)
This step is only necessary for initial setup –
1. Ensure the battery is fully charged.
2. Fully extend the telescopic antenna.
3. Press the Power button on the left hand side of your radio.
4. The display will show “WELCOME to Digital Radio” and start to scan the entire DAB channel
range and stop at the rst found station. If the radio has been used before, the last used
station will be selected. Press in the tuning/menu jog wheel to play the station.
5. Turn the jog wheel either up or down to display station list and nd desired station. Press in
the jog wheel to select the station. The radio will tune to the station and display the station
name.
6. Adjust the volume control for comfortable listening.
8
GB
Service Information – DAB
The Service Information display – Technical information on the current status of the station
being broadcast.
While listening to DAB+, continually press in the jog wheel to cycle through information on
a. Scrolling text
b. Program type (PTY)
c. Multiplex Name
d. Date
e. Channel and Frequency
f . Audio Format
g. Signal Strength
9
Menu in DAB mode
Press and hold the jog wheel for 2 seconds to enter the menu list. Turn the jog wheel up/
down to highlight the following options and press the jog wheel to select the desired function.
If you want to go back to the current listening at any stage, press the jog wheel:
Action
to store and recall favorite stations. You can store a maximum of 10
stations in the DAB+ band.
Shows all the available stations at the present.
press in and turn the jog wheel to scroll the whole station list. Press in the
jog wheel to select desired station.
press in the jog wheel to scan the whole DAB+ network in your area.
Radio will tune to rst station found after the scanning is completed.
your radio has 3 station order settings from which you can choose. The
station order settings are as following.
Alphanumeric: sorts the station list alpha-numerically 0…9 A…Z
Ensemble: organizes the station listed by DAB multiplex.
Valid: shows only those stations for which a signal can be found.
The current setting is indicated by an asterisk.
Function
Favorites
Station List
Manual Tune
Full Scan
Station Order
Indice
Altri manuali Sangean Radio
Sangean
Sangean DT-110 Manuale utente
Sangean
Sangean WR-11 Manuale utente
Sangean
Sangean ATS-909X2J Manuale utente
Sangean
Sangean DT-210L Manuale utente
Sangean
Sangean PR-D12BT Manuale utente
Sangean
Sangean DT-250 Manuale utente
Sangean
Sangean WFT-1 Manuale utente
Sangean
Sangean DDR-75BT Manuale utente
Sangean
Sangean REVERY R10 Manuale utente
Sangean
Sangean SR-25 Manuale utente
Sangean
Sangean DDR-31+ Manuale utente
Sangean
Sangean REVERY R4 WFS-58 Manuale utente
Sangean
Sangean SR-3 Manuale utente
Sangean
Sangean WR-3 Manuale utente
Sangean
Sangean WFR-20 Manuale utente
Sangean
Sangean MMR-88 Manuale utente
Sangean
Sangean DPR-25+ Manuale utente
Sangean
Sangean WFT-2D Manuale utente
Sangean
Sangean SR-2 Manuale del proprietario
Sangean
Sangean SIR-300 Manuale utente
