Sangean WR-2 Manuale utente

Version 1

WR-2

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not fit

into your outlet. consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

Only use attachments/accessories specied by the manufacturer.

Important Safety Instructions

10.

11.

Use only with the cart, stand, tripod, bracket, or table specied

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused

for long periods of time.

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged. liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

To Reduce the Risk of Fire or Electric Shock, Do not Expose

This Appliance To Rain or Moisture.

The Shock Hazard Marking and Associated Graphical Symbol

is provided on the bottom panel of unit.

Apparatus shall not be exposed to dripping or splashing and no

objects lled with liquids, shall be placed on the apparatus.

Excessive sound pressure on ear- and headphones could impair

the hearing ability. Higher setting that idle on the equalizer leads

to higher signal voltages on the output for ear and headphones.

The power plug should be close to the radio, and easy to be

approached that during the emergency, to disconnect the power

from the radio, just unplug the power plug from the AC power slot.

Where the MAINS plug or an appliance coupler is used as the

disconnect device, the disconnected.

12.

13.

14.

15.

16.

17.

18.

19.

20.

Speaker (not available in WR-2CLX)

Light button

Band button

LCD display

Preset buttons

Power On / Off / Sleep button

Tuning control knob

Volume / tone control

Menu button

Mono button

Info button

Headphone socket

AC power cord socket

12V DC input socket (ideal for vehicles / boats)

REC out socket

External / Internal antenna switch

External F-type FM antenna terminal

External AM antenna terminal

Controls

Frequency / Time / Station display

Daylight Saving Time (DST)

Sleep status

RDS indicator

Stereo indicator

Memory preset

Display icons

Power your radio

AC operation

Before you plug the AC cord into the radio, be sure the AC voltage

is correct. Insert the plug on the end of the supplied power cord

into the AC power socket on the back of the radio.

DC operation

For outdoors use, you can power the radio by using 12V DC input

socket from a DC power supply (example, from the power supply of

vehicles or boats). An AC power adaptor with 1 Ampere and center

positive in polarity can also power the radio in house.

Manual clock setting

1. Press Menu button and the display will show ‘CLOCK SET’.

2. Press the Tuning control knob to enter the clock setting.

3. Rotate the Tuning control knob to select the desired hour and

press the Tuning control knob to conrm the hour setting. Now the

minute digit will ash.

4. Rotate the Tuning control knob to adjust the minutes and press

the knob to conrm the setting. Now the clock setting is completed.

Auto clock setting

a. Radio data system (RDS)

When you set the clock time using the RDS function, your radio will

synchronize its clock time whenever it tunes to a radio station using

RDS with CT signals.

1. When tuning to a station transmitting RDS data, press the Menu

button.

2. Rotate the Tuning control knob until a clock symbol appears

on the display. Press the Tuning control knob to enter the setting.

3. Rotate the Tuning control knob until RDS CT (or ‘RBDS CT’ in

the US ) appears on the display. Press the Tuning control knob

to confirm the setting. The clock time of the radio will set up

automatically according to the RDS data received.

4. When the action is completed, you can put your radio in

standby mode, the RDS icon will appear on the LCD display

indicating the radio time is RDS clock time. The radio cock time

will be valid for 24hours each time the radio time is synchronized

with RDS CT.

Note:

RDS service is mainly available in Europe (including UK) and part

of Northern America plus some of Asian countries only.

b. Manual (if your don’t want to synchronized clock time with

RDS CT)

When choosing manual setting as the clock time setting of your

radio, Radio Data System (RDS) function will both be disabled.

1. Press the Menu button.

2. Rotate the Tuning control knob until a clock symbol appears

on the left side of the display, then press the Tuning control knob

to enter the setting. Rotate the Tuning control knob until ‘MANUAL’

appeared on the display, then press the Tuning control knob to

select the setting.

3. Then follow the steps described in the section of ‘Manual clock

setting’ to set the clock time manually.

Change 12/24 hour clock format

1. Press the Menu button to enter the setting.

2. Rotate the Tuning control knob until ‘CLOCK 24H’ is highlighted

on the display. Press the Tuning control knob to enter the setting.

3. Rotate the Tuning control knob to choose 12/24 hour clock format.

Press the Tuning control knob to conrm the setting.

Date setting

1. Press the Menu button to enter the setting.

2. Rotate the Tuning control knob until ‘DATE SET’ is highlighted

on the display. Press the Tuning control knob to enter the setting.

3. Rotate the Tuning control knob to select the desired year and

press the knob to conrm the setting.

4. The month digit will ash on the display. Rotate the Tuning control

knob to select the desired month and press the knob to conrm

the setting.

5. The date digit will ash on the display. Rotate the Tuning control

knob to select the desired date and press the knob to confirm

the setting. Now the date setting is completed.

Change date format

1. Press the Menu button to enter the setting.

2. Rotate the Tuning control knob until date format (e.g. May 17 FR)

is highlighted on the display. Press the Tuning control knob to

enter the setting.

3. Rotate the Tuning control knob to choose your desired format.

Press the Tuning control knob to conrm the setting.

D.S.T (Daylight Saving Time)

1. Press the Menu button to enter the menu setting.

2. Rotate the Tuning control knob until ‘DST OFF’ is appeared on

the display. Press the Tuning control knob to enter the setting.

3. Rotate the Tuning control knob to choose ‘+1H’ (activated D.S.T.)

or ‘OFF’. Then press the Tuning control knob to conrm the setting.

Antenna setup for FM reception

The radio comes with built-in AM/FM antenna and external

antenna.

To use FM internal antenna, make sure to switch FM external/

internal antenna switch in the back of your radio to internal antenna

position (i.e. INT. FM ANTENNA). As for external antenna, you

can use to improve FM reception. Two types of antenna can be

used. You can connect the supplied FM wire antenna to the F-type

antenna terminal and adjust the wire for best reception.

You can also connect a 75 ohm coaxial cable of outdoor antenna

to the terminal. Make sure to switch external/internal antenna

switch to external position while using the supplied wire antenna

or connecting the outdoor antenna. In some of the European

countries, you may have to connect the supplied antenna terminal

adaptor to connect with the outdoor antenna.

Altri manuali per WR-2

Indice

Altri manuali Sangean Radio

Sangean

Sangean RCR-22 Manuale utente

Sangean

Sangean DT-400WAM Manuale utente

Sangean

Sangean PR-D3 Manuale utente

Sangean

Sangean DDR-60BT Manuale utente

Sangean

Sangean ATS-303 Manuale utente

Sangean

Sangean WR-2 Manuale utente

Sangean

Sangean DT-110 Manuale utente

Sangean

Sangean H201 Manuale utente

Sangean

Sangean DPR-2 Manuale utente

Sangean

Sangean HDR-1 Manuale del proprietario

Sangean

Sangean WFR-1 - DATASHEET 3 Manuale utente

Sangean

Sangean DDR-31+ Manuale utente

Sangean

Sangean DPR-42BT Manuale utente

Sangean

Sangean WFR-28BT Manuale utente

Sangean

Sangean Fusion WFR-30 Manuale utente

Sangean

Sangean DPR-15 Manuale utente

Sangean

Sangean PT-633 Manuale utente

Sangean

Sangean WR-2 Manuale utente

Sangean

Sangean H202 Manuale utente

Sangean

Sangean ProTravel PT-50 Manuale utente

Sangean

Sangean SG-106 Manuale utente

Sangean

Sangean PR-D5 Manuale utente

Sangean

Sangean PR-D4 Manuale utente

Sangean

Sangean DPR-99 Plus Manuale utente

Manuali Radio popolari di altre marche

EisSound

EisSound KBSound iSelect Manuale utente

Midland

Midland 1001LWX Manuale utente

Konig

Konig HAV-SR41 Manuale utente

Roberts

Roberts exprssion Manuale utente

VDigi

VDigi DD3.0 Manuale utente

Radio Shack

Radio Shack 21-1863 Manuale utente

Roberts

Roberts Stream 207 Manuale utente

Sony

Sony Walkman SRF-M97 Manuale utente

Stanley

Stanley FatMax FMC770 Manuale utente

auna

auna DAB-Radio 10026947 Manuale utente

SOUNDMASTER

SOUNDMASTER UR190 Manuale utente

HYT

HYT TC-320 Manuale utente

auna multimedia

auna multimedia Yellowstone 10026851 Manuale utente

B-Tech

B-Tech GMRS-V2 Manuale utente

Weierwei

Weierwei VEV-V8 Manuale utente

SOUNDMASTER

SOUNDMASTER DAB750 Manuale utente

Telefunken

Telefunken TF-1505 Manuale utente

Makita

Makita LXRM03 Manuale utente