Sapling SMA 2000 Series Manuale utente

SMA 2000 Series Master Clock

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

Installation Manual V13

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

Table of Contents

SMA 2000 Master Clock

Table of Contents—2

Table of Contents (continued)—3

Wall Mount Installation —4

Rack Mount Installation —5

Installing the Master Clock with the Line Cord Receptacle—6

AC Power Wiring using 14 AWG Romex Cable—6

Rear View of Unit—7

Installing the Remote Antenna—7

Remote Antenna Mounting Instructions—8

2 Wire Digital Communication System Connection—9

RS485 Communication System Connection—10

Sync-Wire Communication System Connection—11

Once-a-day Pulse Using Clock 1 or Clock 2 System Connection—12

59 Minute Correction—13

58 Minute Corrections 1–4—13

National Time/Rauland—14

Rauland Digital—14

Dukane Digital—15

Once a Day Pulse—15

Fire Alarm Interface Installation—16

Patch Cable Installation—16

GPS Antenna Installation—17

Setting Master Clock to GPS Mode—17

Setting the Time from the LED Display—18

Programming the SMA 2000—18-24

Sync-Wire Communication – Protocol Definitions—24

Error Codes on LED Display—25

Accessing the Web Interface (when connected via DHCP)—26

Accessing the Web Interface (when using a static IP)—26

Accessing the Web Interface (when using a crossover cable)—26

Web Interfacing Programming - Log In—27

Web Interfacing Programming - Date/Time—28

Web Interfacing Programming - System Settings—29

*manuals may change without prior notice

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

Table of Contents (continued)

Web Interfacing Programming - DST—30

Web Interfacing Programming - Email Alerts—31

Web Interfacing Programming - Synchronization—32

Web Interfacing Programming - IP Settings—33

Web Interfacing Programming - NTP Servers—34

Web Interfacing Programming - IP Status—35

Web Interfacing Programming - Clock Features—36

Web Interfacing Programming - Database Maintenance—37

Frequently Asked Questions—38

Troubleshooting—39

Compliances—40

SMA 2000 Master Clock

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

Wall Mount Installation

Fig 1

1. Place the supplied template on the wall where the master clock is being mounted.

2. Mark the center point of the top right hole. Drill the hole and install the supplied anchor from the mounting kit.

3. Install the screw into the anchor and hang the template from the top right hole.

4. Using a level and the LINE on the supplied template, mark the center of the three remaining holes.

5. Remove the template and drill out the three remaining holes and insert the anchors.

6. Insert the two top screws into the anchors, leaving 1/8” of thread exposed. Unscrew the bottom wiring cover on the master clock.

7. Line up the top keyholes on the back of the master clock with the two top screws. Slide the master clock into the keyholes and then lock it into

place.

8. Insert the two remaining bottom screws.

9. Screw the wiring cover back into its original position.

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

1. The master clock is 1U in size. Install the threaded nuts in the desired location in the rack rails.

2. Put the nylon washers on the two screws supplied.

3. Line up the master clock with the threaded nut.

4. Insert screws into the threaded nuts and tighten.

Rack Mount Installation

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

Before You Get Started

Installing the Master Clock with the Line Cord Receptacle

Remainder of cord not shown

AC Power Wiring using 14 AWG Romex Cable

Caution! The AC Power Source must be turned OFF.

1. Remove a round knockout on the wiring chassis, preferably one near the AC Input Connector.

2. Install a standard ½” Romex Bushing and tighten in place.

3. Pass the Romex Cable through the Bushing and clamp in place. Do Not over tighten the screws.

4. Strip back the outside cable sheathing to expose the White, Black and Ground wires.

5. Strip back the insulation on the White and Black wire ¼”.

6. Put each wire into the supplied connector and tighten the screws. The wiring label located on the wiring chassis indicates where to connect

the wires.

Caution! Do not plug in the power cord until the following steps are completed.

1. The square knockout on the wiring chassis must be removed.

2. The Heyco Bushing must be attached to the power cord as shown. Use pliers to push both halves of the bushing together while they lock.

3. Put the wires through the knockout and push the bushing into the metal until it locks tightly into place. The word Heyco on the bushing faces

up.

4. Put each wire into the supplied connector and tighten the screws. The wiring label located on the chassis will show where to connect the

wires.

*220-240 VAC

Disconnect

*Note: For CE Compliant installation, use minimum 0.75mm² cable or approved grounded cordset

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

Installing the Remote Antenna

qClock 1 & 2 Sync-Wire Outputs This terminal block is where connections would be landed for Clock 1 and Clock 2 sync-wire

communication relay outputs.

wRS485 Input/Output This terminal block is where connections would be landed for RS485 communication to and from other Sapling

systems.

eInputs This terminal block is where connections would be landed to use the SMA as a slave clock when being controlled by another

system.

rRemote RF Antenna (Rack Mount only) This terminal block is where the connection to an external RF antenna would terminate.

tEthernet This RJ45 jack is used for connecting the master clock to a network for programming and/or timekeeping capabilities.

yGPS Connector This GPS connector is where the antenna for the GPS gets mounted to (GPS option only).

uPower Input This power outlet is used to power up the SMA master clock.

NOTE: This device contains a lithium battery. Replace Battery With Varta, Part No. CR2032 Only. Use Of Another Battery May Present A

Risk Of Fire Or Explosion. Batteries can be obtained and should be installed by the manufacturer.

WARNING: Battery May Explode If Mistreated. Do Not Recharge, Disassemble Or Dispose Of In Fire.

Rear View of Unit

Connect the Remote Antenna to the Master Clock using the supplied 25 foot, 5 conductor 18 AWG cable. Use the wiring diagram and colors as shown above.

Strip the insulation back 1/4 inch on each wire. Use a bushing in the wiring chassis to pass the cable through and secure it, then insert wires into the conductor

and tighten the screws.

For all input and output wiring use copper conductors only tightening torque for terminal block screws is 31 to 35 in/oz.

Blue

Green

Yellow

White

Red

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

1. Remove the cover of the wiring panel.

2. Mark the four drilling points on the wall based on the drawing above.

3. Drill the holes for the anchors supplied in the mounting kit at the designated markings from step 1.

4. Install the four anchors in the holes that were just drilled.

5. Install the first two screws in the top holes leaving 1/8” of the thread exposed.

6. Line up the top key slots over the screws and lock the master clock into place.

7. Install the bottom screws through the wiring access panel and tighten into place.

8. After all wiring is complete, re-install the wiring panel cover.

Remote Antenna Mounting Instructions

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

System Connections – Wired Systems

2 Wire Digital Communication System Connection

110V

(EU 240V)

110V

(EU 240V)

18 19

24V SBD 3000 Series Wired Clock

The Sapling Company, Inc.

1633 Republic Road

Huntingdon Valley, PA 19006

USA

+1 215.322.6063 P.

+1 215.322.8498 F.

www.sapling-inc.com

System Connections – Wired Systems

RS485 Communication System Connection

(240/24VAC)

110 / 24V SBD 3200/3300 Series

Wired Clock

(240/24VAC)

Black

White

Black/Yellow

Orange/White

Black

White

110 / 24 V SRM Series Analog Clock

Altri manuali per SMA 2000 Series

Indice

Altri manuali Sapling Orologio

Sapling

Sapling SAL-2 Series Manuale utente

Sapling

Sapling SAL-2 Series Manuale utente

Sapling

Sapling SBT 3000 Series Istruzioni per il montaggio

Sapling

Sapling SBD 1000 Series Manuale utente

Sapling

Sapling SBD 3000 Series Istruzioni per il montaggio

Sapling

Sapling SMA 5000 Series Manuale utente

Sapling

Sapling SBD Series Manuale utente

Sapling

Sapling SBL Series Manuale utente

Sapling

Sapling SMA 6000 Series Manuale utente

Sapling

Sapling Saw 4 Manuale utente

Sapling

Sapling SLD Premium Series Manuale utente

Sapling

Sapling SBP-31 Manuale utente

Sapling

Sapling NTP 7000 Series Manuale utente

Sapling

Sapling SMC 3000 Series Manuale del proprietario

Sapling

Sapling SBP Series Manuale utente

Sapling

Sapling SAP Series Manuale utente

Sapling

Sapling SBT Series Manuale utente

Sapling

Sapling SAI Series Manuale utente

Sapling

Sapling SBL 3000 Series Istruzioni per il montaggio

Sapling

Sapling SMA 3000 Series Manuale utente

Sapling

Sapling SBL 3000 Series Istruzioni per il montaggio

Sapling

Sapling SALG Series Manuale utente

Sapling

Sapling SBP 3000 Series Istruzioni per il montaggio

Sapling

Sapling NTP 8000 Series Manuale utente

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

La Crosse Technology

La Crosse Technology WS-8256-AL Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

La Crosse Technology

La Crosse Technology WT-3141b Manuale

La Crosse Technology

La Crosse Technology W86531 Manuale utente

Sharp

Sharp SPC900 Manuale utente

La Crosse Technology

La Crosse Technology 404-50447 Manuale utente

Datexx

Datexx DF0063 Manuale utente