Sartorius Basic lite Manuale utente

98648-008-55

Operating Instructions

Sartorius Basiclite

Sartorius Gemlite

Electronic Precision Balances

and Precious Metal Scales

Practical Use Contents

The Basiclite Series and Gemlite Series

from Sartorius offer precision alances/

scales with capacities ranging from

0.1 mg to 12 kg.

These alances/scales meet the highest

requirements on the accuracy and

relia ility of weighing results through

the following features:

– Efficient filtering-out of unfavora le

am ient conditions such as vi rations,

drafts, etc.

– Sta le and reproduci le results

– Rugged, dura le weighing system

Basiclite alances and Gemlite scales

save work and speed up simple routine

applications through:

– Ultrafast response times

– Easy operation

You can also choose from the following

extra functions for simple applications:

– Toggling etween weight units

– Net-total formulation (tare memory)

– Counting

– Weighing in percent

– Averaging

2Practical Use

2 Contents

2Warning and Safety Information

3Getting Started

Operating the Balance/Scale

8 Basic Weighing Function

9 Cali ration/Adjustment

Application Programs

10 Counting

12 Weighing in Percent

14 Weigh Averaging

16 Net-Total Formulation/

Second Tare Memory

17 Toggle Between Weighing Units

Configuring the Balance/Scale

18 Setting the Parameters (Menu Codes)

19 Balance/Scale Operating Menu

(Overview)

20 Error Codes

21 Care and aintenance

22 Instructions for Recycling

Overview

23 Specifications

28 Accessories (Options)

29 CMarking

Warning and Safety Information

Read these operating instructions

thoroughly efore using your alance/

scale to prevent damage to the equip-

ment. Keep these instructions in a safe

place.

Follow the instructions elow to ensure

safe and trou le-free operation of your

alance/scale:

!Make sure that the voltage rating

printed on the AC adapter is identical

to your local line voltage

!Use only a commercially availa le

9-volt attery or rechargea le attery

!Do not use this alance/scale in a haz-

ardous area/location

– The only way to turn the power off

completely is to disconnect the AC

adapter

– Connect only Sartorius accessories and

options, as these are optimally designed

for use with your alance/scale.

– Protect the AC adapter from contact

with liquid.

Do not open the alance/scale housing.

If the seal is roken, this will result in

forfeiture of all claims under the manu-

facturer’s warranty.

Getting Started

Warranty

Do not miss out on the enefits of our

full warranty. Please contact your local

Sartorius office or dealer for further

information. Complete the warranty

registration card, if availa le indicating

the date of installation, and return the

card to your Sartorius office or dealer.

Storage and Shipping Conditions

Do not expose the alance/scale to

shocks, vi ration, moisture or extreme

temperatures.

Unpacking the Balance/Scale

§After unpacking the alance/scale,

check it immediately for any visi le

damage as a result of rough handling

during shipment.

$If you see any sign of damage, proceed

as directed in the chapter entitled “Care

and Maintenance,” under the section on

“Safety Inspection.”

Save the ox and all parts of the

packaging until you have successfully

installed your alance/scale. Only

the original packaging provides the est

protection for shipment. Before

packing your alance/scale, unplug all

connected ca les to prevent damage.

Equipment Supplied

The equipment supplied includes the

components listed elow:

BL210S, BL120S, BL60S, GC503, GC103

– Balance/scale

– Weighing pan

– Pan support

– Shield ring

– Shield plate

– Dust cover

– AC adapter

– Gem tray (only with GC models)

– Cali ration weight 100 g, F1

(only with model GC503)

BL150S

– Balance/scale

– Weighing pan

– Pan support

– Glass draft shield with cover

– AC adapter

Balances/scales with a reada ility

of >0.01g

– Balance/scale

– Weighing pan

– Pan support (only on models with a

round weighing pan)

– AC adapter

Installation Instructions

Your alance/scale is designed to

provide relia le weighing results under

normal am ient conditions. When

choosing a location to set up your al-

ance/scale, o serve the following so

that you will e a le to work with

added speed and accuracy:

– Set up the alance/scale on a sta le,

even surface

– Avoid placing the alance/scale in close

proximity to a heater or otherwise

exposing the alance/scale to heat or

direct sunlight

– Protect the alance/scale from drafts

that come from open windows or doors

– Avoid exposing the alance/scale to

extreme vi rations during weighing

– Protect the alance/scale from

aggressive chemical vapors

– Do not expose the alance/scale to

extreme moisture over long periods

Conditioning the Balance/Scale:

Moisture in the air can condense

on the surfaces of a cold alance/

scale whenever it is rought into a

su stantially warmer place. If you

transfer the alance/scale to a

warmer area, make sure to condition it

for a out 2 hours at room temperature,

leaving it unplugged from AC power.

Information

on Radio Frequency Interference

Warning!

This equipment generates, uses and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instruction manual, may cause

interference to radio communications.

It has een tested and found to comply

with the limits for a Class A computing

device pursuant to Su part J of Part 15

of FCC Rules, which are designed to

provide reasona le protection against

such interference, when operated in a

commercial environment. Operation of

this equipment in a residential area is

likely to cause interference, in which

case the user, at his own expense, will

e required to take whatever measures

may e required to correct the

interference.

Setting up the Balance/Scale

Balances/Scales with an Analytical Draft Shield

Cham er:

§Place the components listed elow inside the

cham er in the order given:

– Shield plate

– Shield ring

– Pan support

– Weighing pan

– Gem tray (only with GC models)

Balances/Scales with a Glass Draft Shield:

§Place the components listed elow inside

the cham er in the order given:

– Draft shield ase – place it on the alance/scale so

that the edge for fitting the glass draft shield faces

upwards and turn it until it is firmly in place

– Pan support

– Weighing pan

– Glass draft shield

– Draft shield cover – place it on the alance/scale so

that the edge faces downwards

Balances/Scales with a Round Weighing Pan

§Place the components listed elow inside

the cham er in the order given:

– Pan support

– Weighing pan

Balances/Scales with a Rectangular Weighing Pan:

§Place the weighing pan on the alance/scale

Connecting the Balance/Scale to AC Power/

Safety Precautions

Use only original Sartorius AC adapters:

– for Europe: 6971948 – for the RSA: 6971949

– for the U.S.: 6971947 – for Australia: 6971950

§Insert the right-angle plug into the jack

§The AC adapter rated to Class 2 can e plugged into

any wall outlet without requiring any

additional safety precautions

The ground is connected to the alance/scale

housing, which can e additionally grounded

for operation.

Using a Non-Rechargeable/Rechargeable Battery

(not for models BL210S, BL120S, BL60S, BL150S,

BL1500S, GC503, GC103, GM1502, GM2202,

GM1202)

$A non-rechargea le or rechargea le attery is not

included with the equipment supplied

!Use only a commercially availa le non-rechargea le

or rechargea le 9-volt attery

!When using a rechargea le attery, always use an

external charger to recharge the attery

§Lay the alance/scale on its side

§Open the attery compartment:

Lift the compartment cover

§Insert the 9-volt (rechargea le) attery in the

compartment

$Make sure to connect the positive and negative

poles correctly

!All used atteries are classified as waste

that requires special handling (not “household”

waste). Dispose of rechargea le atteries in accor-

dance with the applica le special waste disposal reg-

ulations.

§Close the attery compartment:

Press down on the cover until it clicks into place

Selecting the Line Voltage ( ains Voltage)

Use the following original AC adapters for selecting

the line voltage:

– AC adapter TNG8, order no. 6971951 (universal)

– AC adapter TNG8, order no. 6971952 (for the U.K.)

●Use the switch to toggle etween 230 V and 115 V

Leveling the Balance/Scale

(only for models BL210S, BL120S, BL60S, BL150S,

BL1500S, GC503, GC103, GM1502, GM2202,

GM1202)

Level the alance/scale any time you set it up in

a new location. Use only the 2 front feet of the

alance/scale for leveling.

§Turn the 2 rear feet until they are in position

(only on models BL1500S and GM1502, GM2202

and GM1202)

§Turn the 2 front feet as shown here in the illustra-

tion until the air u le is centered in the level

indicator

> In most cases, this will require several adjustment

steps

Anti-theft Locking Device

To protect against theft, use the mounting lug on

the rear panel of the alance/scale.

●Secure the alance/scale at the place of installation,

for example with a chain or a lock

Operating the Balance/Scale

Basic Weighing Function

Available Features

– Taring the alance/scale

You can tare the alance/scale within the entire weighing range.

Preparation

§Turn on the alance/scale: Press e

§To change configurations: See the chapter entitled “Configuring the Balance/Scale”

§To load factory-set configurations: See “Configuring the Balance/Scale,” parameter 9 – 1

$To tare the alance/scale: Press t

Additional Functions

§To turn off the alance/scale: Press e

Example

Basic weighing

Menu code settings: Factory-set codes

Step Key (or instruction) Display/Printout

1. Turn on the alance/scale e

Self-test is performed

2. Place container on alance/ + 52.0 g

scale (here: 52 g)

3. Tare the alance/scale t+0.0 g

4. Place sample in container on + 150.2 g

alance/scale (here: 150.2 g)

Calibration/Adjustment*

Always cali rate/adjust the alance/scale after setting it up in a new location.

Available Features

Cali ration/adjustment can only e performed when

– there is no load on the alance/scale,

– the alance/scale is tared,

– the internal signal is sta le.

If these conditions are not met, an error message is displayed.

The weight required for cali ration/adjustment is displayed (see “Accessories” for

cali ration weights; for model GC503 see “Equipment Supplied”).

On Basiclite alances, cali ration/adjustment can e performed with any of three weight

units: g, kg**, or l (menu code 1. 4. x)

Factory setting: Grams (menu code 1. 4. 1)

Example

Cali rate the alance/scale

Menu code settings: Factory-set codes

Step Key (or instruction) Display/Printout

1. Turn on the alance/scale e

2. Tare the alance/scale t0.0 g

3. Begin cali ration t>2 sec. + 1000.0

Cali ration weight is displayed

without weight unit (here: 1000 g)

4. Place the indicated cali ration 1000.0

weight on the alance/scale

After cali ration, the cali ration + 1000.0 g

weight is displayed with wt. unit

5. Remove the cali ration weight 0.0 g

* = “Cali ration” technically means to determine the difference etween the alance/scale readout

and the actual weight on the pan to determine the accuracy.

Adjustment means to ring a alance/scale into the state of accuracy required for its use.

Therefore, “cali ration,” as used in this manual, actually means “adjustment.”

**= not on models with a reada ility of 0.1 mg

Application Programs

Counting

Purpose

With the Counting program you can determine

the num er of parts that each have approximately

equal weight.

Available Features

– Store the current weight value to have it loaded

as the preset reference sample quantity next time

you initialize the Counting application

– The reference sample quantity can e changed

in the operating menu:

See “Configuring the Balance/Scale”

– The average piece weight is automatically

output via the optional data interface port after ini-

tialization, if the menu code for “Printout

with data ID codes” is set

– Press vto toggle the display etween piece count

and weight

Factory Settings

Reference sample quantity: 10 (menu code 3. 3. 2)

Preparation

§Configure the Counting application

in the operating menu:

See “Configuring the Balance/Scale”

Menu code 2. 1. 4 Counting

§Reference sample quantity:

Menu code 3. 3. 1 5 pcs

Menu code 3. 3. 2 10 pcs

Menu code 3. 3. 3 20 pcs

Menu code 3. 3. 4 50 pcs

Menu code 3. 3. 5 100 pcs

See also “Configuring the Balance/Scale”

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sartorius Scala

Sartorius

Sartorius Cubis MCA10202S Series Manuale utente

Sartorius

Sartorius M-prove Series Manuale utente

Sartorius

Sartorius 1002MP9 Manuale utente

Sartorius

Sartorius Master series Manuale utente

Sartorius

Sartorius Sartorius PMA 35D-X Istruzioni operative

Sartorius

Sartorius Sartorius Basic plus Manuale utente

Sartorius

Sartorius Sartorius Basic plus Manuale utente

Sartorius

Sartorius PMA 7501-X Manuale utente

Sartorius

Sartorius YDK 01 Manuale utente

Sartorius

Sartorius PMA 35D Manuale utente

Sartorius

Sartorius combics 1 Manuale utente

Sartorius

Sartorius CP Series Manuale utente

Sartorius

Sartorius PMA.Quality PMA7501 Manuale utente

Sartorius

Sartorius PMA600H Manuale utente

Sartorius

Sartorius PMA7501-Y00G Manuale utente

Sartorius

Sartorius Extend Series Manuale utente

Sartorius

Sartorius Cubis Series Manuale utente

Sartorius

Sartorius Secura Manuale utente

Sartorius

Sartorius PMA.Evolution Manuale utente

Sartorius

Sartorius Entris II Advanced Line BCA623-1S Manuale utente

Sartorius

Sartorius PMA.Economy Manuale utente

Sartorius

Sartorius Entris II Scheda tecnica

Sartorius

Sartorius Economy Series Manuale utente

Sartorius

Sartorius CUBIS MSU Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente