Sartorius Cubis MCA Scheda tecnica
Technical Note
Scope
The setup of building an
independent Wi-Fi network
orWi-Fi access to a company
network forwireless printing
with Cubis®MCA balances is
described step-by-step.
In AnnexA-B compatible Wi-Fi
sticks and routers are listed and
in Annex C the configuration
of a compatibleWi-Fi router
is explained.
1. Introduction and Overview
The Cubis®MCA supports wireless printing in different
configurations. This document explains the possible setups,
the configuration and pros and cons.
Note: The described functions are only available in the firm-
ware 09-03-02.02.14 orlater. Perform a firmware upgrade,
if yourbalance is running on an earlier firmware version.
Wireless printing with YDP30-NET is generally possible
in 2 different setups.
Cubis®MCA:
Wireless Printing With YDP30-NET
Table of Content
1. Introduction and Overview..................................1
2. Setup with independent Wi-Fi network ....................3
3. Setup with Wi Fi access to company network ..............9
4. AnnexA: Compatible Wi-Fi Sticks .........................14
5. Annex B: Compatible Wi-Fi Router ........................14
6. Annex C: Configuration of Wi-Fi Mini Router
TP Link TL WR802N..........................................15
Scenario 1: Setup with independent Wi-Fi network
In this scenario the balance and the printer create an inde-
pendentWi-Fi network using standard Wi-Fi components.
The advantage of this setup: No dependencyon company
network security policies or its network settings.This setup
is recommendedwhen no other networkfunctions are used
and simply printing is enough. The detailed steps forthis
setup are described in chapter 0.
Scenario 2: Setup with Wi-Fi access to company network
In this scenario the balance and the printeruse the company
network. The balance connects via Wi-Fi to the company
networkand the printerconnects via Ethernet to the company
network. The advantage of this setup: It takes less cables
and no mini-router. Additionally all the network functions
of the balance can be used throughout the companynetwork.
However, this setup has two limitations:
1.)The loginvia Wi-Fi only supports standard authentication
methods and no special security policies. In networks that
requires special security policies the connection will notwork.
Note: One or Multiple balances can connect to one printer.
However, if two balances print exactly at the same time, only
one printoutwill “win”. The other one will be lost and must
be repeated manually from the report screen.
2.) The network must provide a DHCPserver. Working with
fixed IP addresses is not supported by the printer.
The detailed steps for this setup are described in chapter 3.
Note:
One or Multiple balances can connect to one printer.
However, if two balances print exactly at the same time,
only one printout will “win”.The other one will be lost and
must be repeated manually from the report screen.
Ethernet (Company Network with Wi-Fi access)
Step 1: Needed Accessories and Preparations
1. Network-enabled line printer: YDP30-NET
2.Wi-Fi stick: YWLAN01MS or anothercompatibleWi-Fi stick
(AnnexA: CompatibleWi-Fi Sticks)
3. Wi-Fi router:YWLAN02MS or another compatible router
(Annex B: Compatible Wi-Fi Router)
4. Make sure the balance has firmware 09-03-02.02.14 or
higher installed.
2. Setup with independent Wi-Fi network
6. Power on printer. The printer prints the Sartorius logo and
softwareversion as shown in picture below.
7. Press the form feed button within 10 seconds after the
printerhas printed the logo.The printerwill then print its
status information.
8. Check fora valid the IPaddress on the printout. If it is
0.0.0.0 then press the form feed button againwithin 10
seconds (while LED is orange) to repeat printout. Typically
the printerneeds 20 seconds to establish a connection and
get an IP address. See example below (left).
9. Keep the printoutwith the IP address for the configuration
of the balance. See example below (right).
Step 2: Installation of the printer
1. Unpack the wireless printer (YDP30-NET) and the Wi-Fi
router (YWLAN02MS).
2. Note the SSID and passwort on the bottom side of the
Wi-Fi router for later use:
3. Connect printer andWi-Fi router using the network cable.
4. Connect printer andWi-Fi router to power supply.
5. Power onWi-Fi router. Wait 60 seconds to finish boot
process inWi-Fi router.
Step 3: Configure Wi-Fi in the balance
1. PlugWi-Fi stick into balance into the right side of the
display or the back of weighing module.
2. Login as administrator, service or any other user with
administrator rights.
3. Go to Settings Menu -> Connections -> Network ->Wi-Fi
Press the EDIT button on the top right.
4. Enterthe Wi-Fi settings of the Wi-Fi router
(SSID and password).
Note: It is possible to configure another SSID and Wi-Fi
password in theWi-Fi router.
5. Check the connection state in the overview screen.
Within 10s it should change to “ready”.
6
Step 4: Configure the network printer
1. Go to Settings Menu -> Connections -> Connector ->
YDP30-NET
Press + button to configure a new printer.
2. Entera new name for the printer and the IPaddress
(as shown on the configuration printout).
7
Step 6: Use Print Profile in Task
1. Go to Main Menu -> Task Management.
Create a new or select and edit an existing task.
2. Use the configured print profile in this task. Save the task.
Step 5: Configure the Reporting profile &Task
1. Go to Settings Menu -> Weighing and Print Profiles ->
YDP30
Press + button for new profile or select and edit a
pre-configured profile.
2. Select the configured network printer in the setting for
“Connectors”.
3. Name and save the print profile for later use in Tasks.
8
4. Press Printout button.
5. The report should be printed as configured.Then the
setup is finished.
Step 7: Test Printout
1. Go to Main Menu and start the configured Task.
2. Take over some data.
3. Go to Print Preview.
9
Step 2: Installation of the printer
1. Unpack the wireless printer (YDP30-NET) and connect
with Ethernet cable to Network.
2. Power on printer. The printer prints the Sartorius logo and
softwareversion as shown in picture below.
3. Press the form feed button within 10 seconds after the
printerhas printed the logo.The printerwill then print its
status information.
Step 1: Needed Accessories and Preparations
1. Network-enabled line printer:
YDP30-NET
2. Wi-Fi stick:YWLAN01 or anothercompatibleWi-Fi stick
(AnnexA: Compatible Wi-Fi Sticks)
3. Make sure the balance has firmware 09-03-02.02.14 or
higher installed.
3. Setup with Wi Fi access to company network
10
7. Login as administrator, service or any other user with
administrator rights.
8. Go to Settings Menu -> Connections -> Network ->Wi-Fi
Press the EDIT button on the top right.
9. Enterthe Wi-Fi settings of the Wi-Fi network (SSID and
password).The credentials must be provided by the net-
work administrator.
4. Check fora valid the IPaddress on the printout. If it is
0.0.0.0 then press the form feed button againwithin 10 sec-
onds (while LED is orange) to repeat printout.Typically the
printerneeds 20 seconds to establish a connection and get
an IP address. See example below (left).
5. Keep the printoutwith the IP address and the host name for
the configuration of the balance. See example below(right).
Note: If this step does notwork then there is either a hardware
defect or no connection to the DHCPserver in the network.
Step 3: Configure Wi-Fi in the balance
6. PlugWi-Fi stick into balance into the right side of the dis-
play or the back of weighing module.
Indice
Altri manuali Sartorius Scala
Sartorius
Sartorius 1002MP9 Manuale utente
Sartorius
Sartorius Entris II Advanced Line BCA623-1S Manuale utente
Sartorius
Sartorius FC Manuale utente
Sartorius
Sartorius Factory Series Manuale utente
Sartorius
Sartorius Talent Series Manuale utente
Sartorius
Sartorius Master Pro Series Manuale utente
Sartorius
Sartorius SIWABBP Manuale utente
Sartorius
Sartorius PMA7501-Y00G Manuale utente
Sartorius
Sartorius PMA35001-Y Manuale utente
Sartorius
Sartorius MC 210 S Manuale utente
Sartorius
Sartorius Secura Manuale utente
Sartorius
Sartorius PMA.Qualit Series Manuale utente
Sartorius
Sartorius Entris BCE Series Manuale utente
Sartorius
Sartorius PMA.Evolution Manuale utente
Sartorius
Sartorius WZB25-NC Manuale utente
Sartorius
Sartorius 1601 MP 8 Manuale utente
Sartorius
Sartorius PMA.Power Manuale utente
Sartorius
Sartorius CAPXS Series Manuale utente
Sartorius
Sartorius Element Series Manuale utente
Sartorius
Sartorius Factory Series FC06BBE-S Manuale utente
