SCHUNK IFT SST Istruzioni utente
Translation of Original Operating Manual
SCHUNK IFT SST Clamping Force Tester
Assembly and Operating Manual
Imprint
2 01.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
Imprint
Copyright:
This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights
reserved.
Technical changes:
We reserve the right to make alterations for the purpose of technical improvement.
Document number: 1501182
Version: 01.00|03/02/2022|en
Dear Customer,
thank you for trusting our products and our family-owned company, the leading
technology supplier of robots and production machines.
Our team is always available to answer any questions on this product and other solutions.
Ask us questions and challenge us. We will find a solution!
Best regards,
Your SCHUNK team
Customer Management
Tel. +49–7572-7614-1300
Fax +49-7572-7614-1039
Please read the operating manual in full and keep it close to the product.
Table of Contents
Table of Contents
1 General instructions................................................................................................. 5
1.1 Information about this manual ............................................................................ 5
1.1.1 Presentation of Warning Labels ...............................................................5
1.1.2 Applicable documents ..............................................................................6
1.2 Warranty .............................................................................................................. 6
1.3 Scope of delivery .................................................................................................. 6
2 Basic safety notes .................................................................................................... 7
2.1 Intended use......................................................................................................... 7
2.2 Not intended use.................................................................................................. 7
2.3 Structural changes................................................................................................ 7
2.4 Spare parts ........................................................................................................... 8
2.5 Ambient conditions and operating conditions ..................................................... 8
2.6 Personnel qualification......................................................................................... 8
2.7 Personal protective equipment............................................................................ 9
2.8 Instructions for safe operation............................................................................. 9
2.8.1 Constructional changes, attachments, or modifications ..........................9
2.9 Transport .............................................................................................................. 9
2.10 Malfunctions....................................................................................................... 10
2.11 Disposal .............................................................................................................. 10
2.12 Fundamental dangers......................................................................................... 10
2.12.1 Notes on particular risks.........................................................................10
3 Technical Data ........................................................................................................11
3.1 Tablet technical data: ......................................................................................... 11
3.2 Measuring head technical data .......................................................................... 11
4 Functional description and operation......................................................................12
4.1 Overview............................................................................................................. 12
4.2 Measuring head.................................................................................................. 12
4.2.1 General ...................................................................................................12
4.2.2 Charging process / state of charge .........................................................13
4.2.3 Changing the clamping inserts................................................................14
4.3 Tablet and APP ................................................................................................... 14
4.3.1 Functional description of the tablet .......................................................14
4.3.2 Operating the APP ..................................................................................15
4.3.3 Live screen ..............................................................................................16
4.3.4 History ....................................................................................................18
4.3.5 Images ....................................................................................................19
4.3.6 Machines and clamping devices editor ..................................................20
4.3.7 Calculation method of the clamping force .............................................20
4.3.8 Measuring procedure .............................................................................21
5 Calibration and recalibration ..................................................................................22
6 Charging adapter ....................................................................................................23
301.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
General instructions
1 General instructions
1.1 Information about this manual
This manual contains important information for the safe, correct
use of the product.
The manual is an integral part of the product and must be kept
accessible for personnel at all times.
Personnel must have read and understood this manual before
beginning any work. The observance of all safety notes in this
manual is the precondition for safe working. The illustrations in
this manual are intended to provide a basic understanding and
may deviate from the actual version.
Besides this manual, other documents which apply are those listed
under (1.1.2)
1.1.1 Presentation of Warning Labels
To make risks clear, the following signal words and symbols are
used for safety notes.
DANGER
Danger for persons!
Non-observance will inevitably cause irreversible injury or death.
WARNING
Dangers for persons!
Non-observance can lead to irreversible injury and even death.
CAUTION
Dangers for persons!
Non-observance can cause minor injuries.
CAUTION
Material damage!
Information about avoiding material damage.
501.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
General instructions
6 01.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
1.1.2 Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
The documents labeled with an asterisk (*) can be downloaded
from schunk.com.
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the applicable documents, }1.1 [/5]
• Observe the ambient conditions and operating conditions
• Observance of the specified calibration intervals.
Parts touching the workpiece and wearing parts are not part of the
warranty.
1.3 Scope of delivery
1 Tablet incl. APP
1 Measuring head
2 Intermediate stops
1 Charging adapter for tablet and measuring head
2 USB charging cable
1 Torx wrench
3 Screws for intermediate stop
Basic safety notes
2 Basic safety notes
Risks to persons and property may arise from incorrect handling of
this product if these instructions are disregarded.
Report any damage and defects immediately and repair without
delay to keep the extent of the damage to a minimum and avoid
compromising the safety of the product.
Only original SCHUNK spare parts may be used!
2.1 Intended use
The product is intended for measuring clamping force on clamping
devices in a machine tool. Measurements are performed as a static
measurement (clamping force without speed of rotation).
• The product may only be used within the scope of its technical
data.
• The product is intended for industrial and industry-oriented use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Not intended use
The product is not being used as intended if, for example:
• the product is used with machines or clamping devices that are
not designed to be used with it.
• the specified technical data for use of the product are
exceeded.
• the product is used in working environments that are not
permissible.
• system changes or external influence of the tablet by the
operator.
2.3 Structural changes
Implementation of structural changes
Modifications, changes or reworking, e.g. additional threads,
holes, or safety devices, can damage the product or impair its
functionality or safety.
• Structural changes should only be made with the written
approval of SCHUNK.
701.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
Basic safety notes
8 01.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
2.4 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts and spares authorized by SCHUNK.
2.5 Ambient conditions and operating conditions
Requirements for ambient and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
• Make sure that the product is only used within its defined
application parameters.
• The measuring head must have reached room temperature
before measurement.
2.6 Personnel qualification
Inadequate qualification of personnel
Work on and with the product by inadequately qualified personnel
can lead to serious injuries and considerable material damage.
• Order all work to be performed only by appropriately qualified
personnel.
• Personnel must have read and understood the complete
operating manual before beginning any work on the product.
• Observe national accident prevention regulations and the
general safety notes.
The following personnel qualifications are required for the various
types of work on the product:
Specialist personnel:
Specialist personnel have the specialized training, knowledge, and
experience to perform the tasks entrusted to them, to recognize
and avoid potential dangers, and know the relevant standards and
regulations.
Instructed personnel:
Instructed persons have been instructed by the user regarding the
tasks entrusted to them and the potential dangers of
inappropriate behavior.
Manufacturer service personnel:
The manufacturer's service personnel have the specialized
training, knowledge, and experience to perform the work
entrusted to them and to recognize and avoid potential dangers.
Basic safety notes
2.7 Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff in the event
of a danger that may interfere with their health or safety at work.
• When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
• Observe the valid safety and accident prevention regulations.
• Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
• Wear close-fitting protective clothing and place a hairnet over
long hair when dealing with moving components.
2.8 Instructions for safe operation
Working in an incorrect manner
An incorrect manner of working can make the product unsafe and
risk the danger of serious injuries and considerable material
damages.
• Avoid any manner of working that may interfere with the
function and operational safety of the product.
• Use the product as intended.
• Observe the safety notes and assembly instructions.
• Do not expose the product to any corrosive media.
• Rectify malfunctions as soon as they occur.
• Observe the calibration intervals.
• Observe the current safety, accident prevention, and
environmental protection regulations for the application field of
the product.
2.8.1 Constructional changes, attachments, or modifications
Additional threads, bore holes or attachments which are not
supplied as accessories by SCHUNK may affect safety. They may
only be applied after obtaining the prior consent of SCHUNK.
2.9 Transport
The transport is performed exclusively in the original, specially
adapted transport case.
901.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
Basic safety notes
10 01.00 | | SCHUNK IFT SST Clamping Force Tester | en | 1501182
2.10 Malfunctions
Behavior in case of malfunctions
• Immediately remove the product from operation and report the
malfunction to the responsible departments/persons.
• Have appropriately trained personnel rectify the malfunction.
• Do not recommission the product until the malfunction has
been rectified.
• Test the product after a malfunction to establish whether it still
functions properly and no increased risks have arisen.
2.11 Disposal
Conduct during disposal
Incorrect handling during disposal can make the product unsafe
and risks serious injuries and considerable material and
environmental harm.
• Follow local regulations on dispatching product components for
recycling or proper disposal.
• Batteries and rechargeable batteries are subject to hazardous
waste treatment and may only be disposed of by authorized
specialist companies.
2.12 Fundamental dangers
General:
• Do not reach into the open mechanism or movement area of
the product during operation.
• Never deactivate safety installations.
• Before commissioning the product, take appropriate protective
measures to secure the danger zone.
• Technical data of the machine or the clamping device must not
exceed the maximum permissible data of the measuring head.
2.12.1 Notes on particular risks
WARNING
Crushing!
•Do not reach between moving parts (measuring head and
jaw).
Indice
Altri manuali SCHUNK Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
