SD System RoadView Touch 3.0 smart HD Manuale utente
※ Safety precautions included in this manual are intended to ensure
your safety and prevent property damage.
Read them carefully before using the product.
※ The product's functions and design features may change without
prior notice for quality and functionality improvement purposes.
1
Precautions
Proper Product Use
☞ Whenever you change the mounting position of the product, adjust the camera angle
and check the video recording to ensure accurate video capturing.
☞ Excessively dark window tinting can hinder normal video recording.
☞ Use the power cable provided by the manufacturer to ensure normal functionality.
☞ Viewing or operating the product while driving can lead to an accident. Use the product
only while the vehicle is stationary.
☞ This product's cameras may not be able to record smooth images in the event of a
sudden change in the brightness level (such as when entering a tunnel) or under
extreme conditions such as shooting directly into the midday sun and shooting in the
darkness of the night with no sufficient light sources in the vicinity.
☞ Certain impact events may not be severe enough to trigger video recording.
☞ In the event of an accident, images may not be recorded if the product has been
damaged or the power supply has been disrupted.
☞ Product damage due to an accident or any other cause may result in failure to record
video data and/or file errors.
☞ Unauthorized disassembly, repair, and modification of the product may lead to product
damage and/or malfunction. The consumer is solely responsible for any product defect
or issue arising thereof.
☞ Liquids and metallic objects entering inside the product can pose electric shock, fire,
and electric leakage hazards. If this occurs, turn off the product, unplug the power cable,
and contact the service center.
Proper microSD Card Use
☞ Insert/remove the microSD card only after powering the main unit off (front LED off).
Inserting/removing the microSD card while the unit is powered on can cause serious
errors. In addition, removing the microSD card while recording is in progress can corrupt
recording data and damage the card itself.
☞ Format the microSD card and perform a virus check at least twice a month to prevent
potential data recording failures.
☞ Use authorized microSD cards only.
☞ The warranty period is 3 months for the microSD card, 6 months for the accessories,
and 1 year for the main unit.
☞ Using a microSD card that contains existing data can lead to errors. Delete all existing
data before use.
☞ Frequently check the recordings and format the microSD card at least once a week
(File System: FAT32/32bit).
☞ Replace the microSD card if it is not recognized when connected to a computer or
cannot be formatted properly.
☞ Using a microSD card that contains existing data can lead to errors. Delete all existing
data before use.
☞ The manufacturer claims no responsibility for data stored on to the microSD card.
☞ Regularly check the data stored on the microSD card and the internal memory to
ensure normal recording performance. This product has been designed as an in-vehicle
recording device. Do not use for purposes other than as intended. The manufacturer is
not responsible for any product defect or issue resulting from negligent use or care of
the product by the consumer.
2
Accessories
After unpacking the product packing box, check inside and make sure all accessories
are included. (Refer to images below)
If the product or any of its accessories is damaged or defective, please contact your
retailer. (Actual components may differ from the images below.)
Main Unit Rear Camera & Extension Cable
microSD Card microSD Card Adapter
Clips Quick Guide
Power Cable
OR
Constant Power Cable Cigarette Jack Cable
※Actual components may differ from the images above.
Accessories described in this manual are subject to change without prior notice for
quality improvement purposes.
※The external GPS module is sold separately and is available for purchase at your
retailer.
Proper microSD Card Use
☞ Insert/remove the microSD card only after powering the main unit off (front LED off).
Inserting/removing the microSD card while the unit is powered on can cause serious
errors. In addition, removing the microSD card while recording is in progress can corrupt
recording data and damage the card itself.
☞ Format the microSD card and perform a virus check at least twice a month to prevent
potential data recording failures.
☞ Use authorized microSD cards only.
☞ The warranty period is 3 months for the microSD card, 6 months for the accessories,
and 1 year for the main unit.
☞ Using a microSD card that contains existing data can lead to errors. Delete all existing
data before use.
☞ Frequently check the recordings and format the microSD card at least once a week
(File System: FAT32/32bit).
☞ Replace the microSD card if it is not recognized when connected to a computer or
cannot be formatted properly.
☞ Using a microSD card that contains existing data can lead to errors. Delete all existing
data before use.
☞ The manufacturer claims no responsibility for data stored on to the microSD card.
☞ Regularly check the data stored on the microSD card and the internal memory to
ensure normal recording performance. This product has been designed as an in-vehicle
recording device. Do not use for purposes other than as intended. The manufacturer is
not responsible for any product defect or issue resulting from negligent use or care of
the product by the consumer.
3
Product Overview
# The actual component may differ from the images above.
Security LED
Flashing
security indicator.
External GPS Antenna
Connector
Rear Camera Connector
Power Cable Connector
Debugging Port
Servicing Port
(do not open.)
Reset Button
If the black box
becomes
unresponsive
during use,
press this button
to reboot the
device.
microSD Card
Slot
Built-In Microphone
Status LED
Blue
Recording LED
Red
Power/Manual Recording Button
Press and hold to turn the power on/off.
Short press to start manual recording.
4
Product Overview
Mount
Lens
Rear Camera Specifications
Rear Camera
Effective Pixels
Power
Viewing Angle
Operating
Temperature
Approx. 120º
640X480
DC 5V
-20ºC ~+60ºC
5
Installation
[Correct Installation Angle]
1/3 of
Vertical Space
2/3 of
Vertical Space
Distant Area
¾ = Dynamic Area
¼ = Fixed Area
[Incorrect Installation Angle]
Distant Area
Dynamic Area
2/3 of
Vertical Space
1/3 of
Vertical Space
6
Product Use
[Front/Rear Preview]
①
②
∙ Tap ① to bring up the menu. The screen automatically reverts to recording mode
after 10 seconds of inactivity.
∙ Tap ② to flip between front and rear camera feeds.
Caution)
If a microSD card has not been inserted, the screen will not turn on. Instead, the black
box will repeatedly ask you to check the microSD card. The black box will function
normally once a microSD card has been inserted.
If you receive the same message even with a microSD card inserted into the black box,
try removing the card and inserting it again. If the problem persists, replace the microSD
card or contact the service center.
7
Menu
① Infinite/Parking Mode Selection
② Video Recording Playback
③ Volume Adjustment (0 - 5)
④ Settings
⑤ Parking Mode Event Count
⑥ GPS Status
⑦ Software Version
⑧ Time & Date
Displays retrieved time and date when connected to GPS.
Displays the system's time and date when not connected to GPS.
(System time and date can be configured under Settings.)
⑨ LCD Off
Tap on the LCD screen to turn the screen back on.
[Terminology]
∙ Infinite: Captures 1minute recordings while the vehicle is on the move.
∙ Parking Event: Starts to record whenever impact is detected while the vehicle is parked.
(20 seconds leading up to and 20 seconds after the impact).
∙ Parking Infinite: Captures 1minute recordings while the vehicle is parked.
∙ Manual: Manual recording initiated by the user.
Menu
①②
③④
⑤⑥
⑦
⑧
⑨
8
Settings: Video & Channel
∙ Choose the desired picture quality (High, Medium, Low).
∙ "High" produces the best picture quality at the cost of recording capacity, whereas
"Low" increases the recording capacity at the cost of picture quality.
∙ Once the recording capacity of each type of recording data is reached, oldest data is
overwritten with new data. Back up the recording data on to a separate storage device
on a regular basis.
∙ Choose between Front/Rear and Front.
∙ Front/Rear: Displays video feeds from front and rear cameras on a single screen. Front
camera feed takes up the bulk of the screen, with the rear camera feed shown as a small
window on the upper right corner. Tap on the PIP window to flip between the channels.
(For more information, refer to "Front/Rear Preview" section on page 6.)
∙ Front: Displays video feed from the front camera only (full screen). Video from the rear
camera is not recorded.
Video
Channel
Questo manuale è adatto per i seguenti modelli
1
Indice
