Seaory R600M Manuale operativo

Shenzhen Seaory Technology Co., Ltd.

www.seaory.com

Exellent quality, Perfect service

1. Introduction to Product Components

1.1 Front-end View

1.2 Back-end View

Ethernet interface: RJ45 interface, TCP/IP protocol, the network connection

between the PC and the printer can be realized through this interface

USB interface: USB-B type interface, directly connected to the PC.

Power interface: connect to AC power 100-240VAC, 50/60Hz, 4A.

Power switch: turn on and off the card printer circuit.

Back-end output card slot: The printed card is ejected from here, supslot

manual feeding card on back-end and recycling pending card.

2.3 Front-end View

Front-end input slot: The printer defaults to the input slot at the factory, and it

can also be set as the output slot.

Cleaning module door: Open this door to install the cleaning module.

Quick Use Guide

Self-service Kiosk Retransfer Dual-sided Card Printer

Model: Seaory R600M

Ethernet interface

Power switch

USB interface

Power switch

Back-end output card slot

Flattening modular door switch

Ribbon door

Back-end output card slot

Read before use: This manual only briefly describes the

basic installation and use. If you need to know more

about the use, installation and functional characteristics

of this product or have other questions, please refer to

the product manual of the corresponding model.

Ribbon door pull ring

Clean module door

Front-end input slot

Shenzhen Seaory Technology Co., Ltd.

www.seaory.com

Exellent quality, Perfect service

2. Unpacking Inspection

Check whether the appearance is intact after opening the outer box, and

check whether the accessories are complete according to the product instruction

manual (prevailed by the sales contract). If there is any missing, please contact

the dealer to communicate and solve.

3. Install Accessories and Consumables

3.1 Install Cleaning Module (Top)

(1) Take out the cleaning module and cleaning roller from the accessory box

of the card printer, and assemble them as shown in the picture below.

After tearing off the 3M adhesive layer, hold the two ends of the cleaning roller

with your hands, push them to the installation position and gently press down to

lock the two ends of the cleaning roller.

(2) Press the red frame part of the upper door in the below left picture, open

the upper door after the upper door lock pops out.

(3) Press the assembled cleaning module as shown in the picture below and

install it into the card printer, and then close the upper door to complete the

installation of the cleaning module (top).

Note: The purpose of the cleaning roller is to absorb the dust on the card and

improve the printing performance.

Shenzhen Seaory Technology Co., Ltd.

www.seaory.com

Exellent quality, Perfect service

3.2 Install the Cleaning Module (Below).

(1) There is a cleaning module door cover under the front entrance/exit slot

of the card printer, lift it out according to the following picture.

After opening the door of the cleaning module, insert the assembled cleaning

module as shown in the below left, and then press the cleaning module to place it

vertically as shown in the lower center.

After above steps are completed, then close the upper door to complete the

installation of the cleaning module (bottom).

3.3 Consumables Preparation

Take out the ribbon and transfer film from the consumable packaging box,

open the corresponding blister boxes respectively and take out the ribbon and

transfer film.

(1) Remove the Consumables Holder:

Pull the ribbon door ring as shown below, open the ribbon door, turn the

handle of the consumable holder, and take out the consumable holder.

Shenzhen Seaory Technology Co., Ltd.

www.seaory.com

Exellent quality, Perfect service

(2) Install the Ribbon and Transfer Printing:

Install the transfer film and ribbon into the consumable holder as shown below.

4. Hardware Connections

Take out the power cable and USB data cable from the accessory box of the

card printer's outer packing box. The USB-A type interface is connected to the

computer, and the USB-B type interface is connected to the USB interface of the

printer.

Ethernet communication interface installation: RJ45 network interface ,568B

connection mode.

Note: supslot USB and Ethernet communication interface. It’s recommended

that to choose one of them.

Mains socket

Ribbon installation

Transfer film installation

Pay attention to the

installation direction,

the gear is facing up!

Interchanger

Card printer

Shenzhen Seaory Technology Co., Ltd.

www.seaory.com

Exellent quality, Perfect service

5. Install Card (Insert Card)

(1) Front-end Input Card

When the card printer is ready, put the card into the front input/output slot, the

machine will automatically swallow the card into the internal track of the device

after detecting the card.

There is no requirement for the direction of contactless IC cards and

ordinary white cards, the card insertion direction can be customized

according to needs.

The contact IC card should be inserted strictly in accordance with the

card direction in the picture below, which is consistent with the ATM

card insertion rules. If you only need to print and don't need to encode

chip data, there is no requirement for the direction of the card. The

card insertion direction can be customized according to needs.

The ISO7811 standard card should be inserted strictly according to

the card direction in the picture below, so that the magnetic stripe

position is at the bottom right of the card, which is consistent with the

ATM card insertion rules. If you only need to print and do not need to

encode magnetic stripe data, there is no requirement for the card

direction, it can be customized according to your needs.

Note: If you need to understand the operation requirements of card input

from the back, please refer to the product manual of the corresponding model.

This manual will not explain it in detail.

Front input/output slot

Contact IC card

If it is a contactless IC card and ordinary white card, there is no

requirement for the card direction, you can customize the card

direction according to your needs.

The position of the magnetic

stripe is at the bottom right of

the card

Back input/output slot

Contact IC card

Shenzhen Seaory Technology Co., Ltd.

011

www.seaory.com

Exellent quality, Perfect service

6. Print Test

6.1 Install the Driver

Download the installation package from the CD in the accessory box or the

company’s official website www.seaory.com. And install the driver according to the

software installation process prompts or the product instruction manual of this

model.

6.2 Print Test

(1) Driver Test Page

Step 1: In the list of printers and devices → right-click the Seaory R600M

printer icon → printer properties.

Step 2: After enter below picture interface, place some white card into input

hopper, then click” Print Test Chart”.

Step 3: When print out the following card, that’s mean the driver program

and hardware installation are normal.

Shenzhen Seaory Technology Co., Ltd.

013

www.seaory.com

Exellent quality, Perfect service

(2) Seaory iCARDE Card Design Software

After all the above steps are completed, relevant software can be used to

print and test the card printer. You can also do print test through Seaory’s iCARDE

software. For details, please refer to Seaory iCARDE manual.

Altri manuali per R600M

Indice

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente