Seaory S21 Manuale di istruzioni



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com



Quick User Guide

Seaory S21 Desktop Single-side Card Printer



Shenzhen Seaory Technology Co., Ltd.



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com

1. Unpacking and inspection



Input hopper cover

If the above accessories are in short supply, please contact your local distributor

immediately.

3) Appearance introduction:

1PC USB cable

1PC power cable

1PC weight module

1PC cleaning roller

5pcs cleaning card

1PC warranty card 1PC cleaning stick

1PC ICARDE software CD

Input hopper cover

LCM screen

Air vent

ut ho

Output

Control panel

buttons

Switch of upper

cover

Input hopper cover

Status indicator

lamp (Green)

Power switch

Interface: Ethernet

Interface: USB

Power

Defective card slot Single card manual

feeding mouth

1) Open the top cover , you will see following items:

Accessories box

Output hopper

PE foam

S22 card printer

2) Accessories list:



1PC output hopper

1PC power adapter



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com

2. Cleaning Roller Installation



3. Ribbon Installation







4.Take the cleaning roller’s both

sides by hand. After pushing into

the mounting position, gently

press down.

2.Open upper cover, take

out the ribbon cartridge.

3. Remove 3M hyaline

layer on cleaning roller

surface.

The purpose of the cleaning wheel is to absorb the dust on the card and improve the

printing effect. Replace cleaning roller after every roll of ribbon use up.

1. Gently lift the upper

cover switch.

Ribbon cartridge

1. Open the upper cover, take

out the ribbon cartridge, install

the ribbon into the cartridge

according to the color direction.

2.Red roller supply with unused ribbon.

White roller supply with used ribbon.

Take ribbon cartridge’s side, Red

roller close to the Back-end card exit

mouth, install the ribbon cartridge.

In order to ensure the normal use of the printer, please use Seaory original ribbon.



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com

4. Place the card, Add the weight module











„

5. Adjust the thickness of card feeding entrance

„



 



1.Open the input hopper

dust cap.

2.Place the card into the input

hopper, then add the weight

module.

3.Install the input hopper dust cap.

1. Open the upper cover.

2.Move the yellow lever to

adjust the feed card thickness.

3.Support 0.3mm to 1.0mm

thickness cards. Factory preset

thickness is 0.8mm.

The feed card thickness needs to be adjusted according to the card’s actual thickness . Like

when it’s 0.76mm standard card, the feed card thickness can be set at 0.8mm. If the card feed

thickness value is set too high, it is easy to enter two cards at the same time; if it is set too small,

it is easy to fail to enter the card.



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com

6. Output Hopper Installation



7. Driver installation 



2.Installation finished.

1. Attach output hopper to the hole where the

arrow

oints.

1.Power adapter 24V connector is inserted into card

printer power interface. Connect the power cable to the

power adapter. Then plug the power cable into the mains

socket. But do not power on until the driver installation is

ete

2. Connect the square port of the USB

cable to the card printer and connect the

flat port to the USB port of the computer.

3.Use CD-rom or download the driver installation

package on the Seaory's official website, double-

click above driver installation package.

4.Click “Install”.

Please install driver by administrator and close all antivirus applications before installation.

The card slot is used to connect printed cards, please keep it

properly



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com



5. Begin to install, please wait for a while. 6. During the installation process, when the above page

appears. Please select always trust software from

“Shenzhen Seaory Technology CO., LTD ” in the pop-up

windows, then click the “Install” button.

7. Wait for one minute, this page appears,

click "finish".



8.Turn on power switch, then the driver will be install

automatically. After installation, please click “Control

panel – Hardware and sound – Devices and printers”

then you can find Seaory S21 was installed completely.



Seaory S21 desktop card printer quick user guide



Excellent quality, Perfect service www.seaory.com

8. Driver setting







9. Print test



After all the above steps are completed, relevant software can be used to print and test the card printer. You can

also do print test through Seaory's " iCARDE " software. For details, please refer to Seaory iCARDE manual.

Please refer to the operation manual for detailed setting of the driver.

1. In "devices and printers", right click on the

printer named "Seaory S21" and select "print

preferences".

2. Enter the printing preferences setting page.

Altri manuali per S21

Indice

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente