Sennheiser Set 810 s Manuale utente
Set 810 S
Bedienungsanleitung
Instructions for use
Notice d´emploi
Istruzioni per l´uso
Instrucciones para el uso
Gebruiksaanwijzing
Bruksanvisning
Set 810 S_088096_0106_Sp7.book Seite 1 Freitag, 9. Dezember 2005 11:37 11
Set 810 S_088096_0106_Sp7.book Seite 2 Freitag, 9. Dezember 2005 11:37 11
SET 810 S 25
English
Set 810 S
The Set 810 S is an assistive listening system for your radio, TV, hi-fi sy-
stem or similar sound sources at the volume you choose. The system al-
lows you to move around freely without the constrictions of cables within
the room where the transmitter is placed. The system uses invisible infra-
red light for sound transmission.
The RI 810 S is an infrared stereo receiver which features an audio socket
for connecting a pair of headphones, induction accessories or hearing
aids with audio input. The RI 810 S receives music and speech via cord-
less transmission from a TI 810 infrared stereo transmitter.
The EZT 1011 induction neck loop inductively transmits the audio signal
from the receiver to hearing aids in T-position.
Set 810 S_088096_0106_Sp7.book Seite 25 Freitag, 9. Dezember 2005 11:37 11
26 SET 810 S
English
Contents
The Set 810 consists of the following
components and accessories:
- Receiver RI 810 S
- Transmitter
(charging unit) TI 810
- Rechargeable battery BA 151
- Power supply NT 810
- Induction neck loop EZT 1011
- Microphone MKE 800 TV
(USA/UK only)
- Connecting cable for
headphone output
- Adapter for SCART socket
(except USA/Canada)
- Adapter for RCA sockets
(USA/Canada only)
- Instruction manual
Set 810 S_088096_0106_Sp7.book Seite 26 Freitag, 9. Dezember 2005 11:37 11
SET 810 S 27
English
Connecting the transmitter (charging unit)
The rear of the transmitter is fitted
with two audio inputs: A socket
(LINE) for connection to the audio
output or the headphone socket on
your TV, and a microphone socket
(MIC).
Plug in one end of the connecting cable to the audio output or the head-
phone socket on your TV, and the other end to the LINE socket on the
transmitter.
If your TV set is fitted with a SCART socket, use the supplied adapter.
If your TV does not have a headphone or SCART socket, you can use an
external microphone which is described in the section "Accessories".
24V
Set 810 S_088096_0106_Sp7.book Seite 27 Freitag, 9. Dezember 2005 11:37 11
28 SET 810 S
English
Only use one of the two audio inputs on the transmitter (MIC or LINE).
Connect the power cable to the POWER socket on the transmitter. Plug
the power supply into a household electrical outlet.
Pull the power supply unit out of the electrical outlet when the unit will not
be used for extended periods of time.
Set 810 S_088096_0106_Sp7.book Seite 28 Freitag, 9. Dezember 2005 11:37 11
SET 810 S 29
English
Where to place the transmitter
Place the transmitter so that the in-
frared light beam is pointed directly
at the receiver, i. e. there should be
no obstacles in the light path bet-
ween transmitter and receiver. Gui-
de the cables backwards.
Avoid exposure to direct sunlight.
Direct sunlight may interfere with
the reception and may damage
the transmitter.
Set 810 S_088096_0106_Sp7.book Seite 29 Freitag, 9. Dezember 2005 11:37 11
30 SET 810 S
English
Using the receiver
The receiver is turned on automatical-
ly as soon as a 3.5 mm stereo jack
plug is inserted into the socket at the
top of the receiver.
Affix the receiver to the clothing by
means of its integrated attachment
clip. Make sure the receiver is positio-
ned correctly, with the operating con-
trolfacingthetransmitter.Theremust
be a free line of sight between the
transmitter and the receiver.
Set 810 S_088096_0106_Sp7.book Seite 30 Freitag, 9. Dezember 2005 11:37 11
SET 810 S 31
English
Using the induction neck loop
Put the EZT 1011 induction neck loop around your neck and insert its
plug into the socket at the top of the receiver. Set your hearing aid to
position "T".
Adjusting the volume
Adjust the receiver's volume with the operating
control. Make sure your hand doesn't cover the
operating control completely. This may prevent
interference-free reception.
If you are not using the receiver, pull the 3.5 mm
stereo jack plug out of the receiver's socket to
avoid discharging the battery. The receiver is
then turned off.
Set 810 S_088096_0106_Sp7.book Seite 31 Freitag, 9. Dezember 2005 11:37 11
32 SET 810 S
English
Turning the automatic compression system on
Use the COM switch (compressi-
on) at the rear of the transmitter
to turn the automatic compressi-
on system on. This system repro-
duces soft passages louder and
decreases loud sounds. Choose
the setting that suits your liste-
ning preferences.
Use the MO/ST switch to choose between mono and stereo transmission.
For mono TVs and when using the MKE 800 TV microphone, the switch
must be set to mono (MO).
24V
Set 810 S_088096_0106_Sp7.book Seite 32 Freitag, 9. Dezember 2005 11:37 11
Indice
Altri manuali Sennheiser Apparecchio acustico
Sennheiser
Sennheiser Set 810 Manuale utente
Sennheiser
Sennheiser SYSTEM 2015 MIKROPORT - Manuale utente
Sennheiser
Sennheiser Audiology Set 810 S Infra-red Manuale utente
Sennheiser
Sennheiser SET 840 S - 06-09 Manuale utente
Sennheiser
Sennheiser Quickguide RS 4200 Manuale utente
Sennheiser
Sennheiser Audiology Set 810 S Infra-red Manuale utente
Sennheiser
Sennheiser ADC1 Manuale utente
Sennheiser
Sennheiser RS 180 Manuale utente
Sennheiser
Sennheiser SI 1015-8000 SINGLE Dimensioni
Sennheiser
Sennheiser DSP 360 - SHORT Manuale utente
Sennheiser
Sennheiser SET 900 - 07-08 Manuale utente
Sennheiser
Sennheiser SI 1015-4000 SINGLE Dimensioni
Sennheiser
Sennheiser Set 820s Manuale utente
Sennheiser
Sennheiser AUDIOLINK PLS-100 Manuale utente
Sennheiser
Sennheiser SI 1015-8000 DUAL Dimensioni
Sennheiser
Sennheiser SI 30-1500 SINGLE Dimensioni
Sennheiser
Sennheiser EZT 3012 Manuale utente
Sennheiser
Sennheiser SI 30-3000 SINGLE Dimensioni
Sennheiser
Sennheiser SI 30-2250 SINGLE Dimensioni
Sennheiser
Sennheiser RI 100 Manuale utente
