SERVIS GC66Y01C11 Istruzioni per il montaggio
OPERATING AND INSTALLATION INSTRUCTIONS
BUILT-IN VITROCERAMIC HOB
CONTENTS:
DESCRIPTION OF THE HOB 3
SAFETY INSTRUCTIONS 4
INSTALLATON 6
Locat ng Your Bu lt- n Hob 6
Electr cal Connect on of Your Hob 8
USAGE 10
Res dual Heat Funct ons 10
CLEANING AND CARE 11
......................................................
............................................................
.............................................................................
.........................................................
............................................
.........................................................................................
.............................................................
2
................................................................
3
DESCRIPTION OF THE HOB
Dear Customer,
It is important that you should read this manual for best performance and
to extend the life of your appliance. We recommend you to keep this manual
for future reference.
Your ne hob is guaranteed for 12 months. This guarantee is only applicable
if the appliance has been installed and operated in accordance ith the
operating and installation instructions detailed in this manual.
Note: Appearance of your hob maybe different than the model sho n above
due to its configuration.
OVAL ZONE
HEATER
VITROCERAMIC
SURFACE
KNOB CONTROL
PANEL
SINGLE ZONE
HEATER
HOB
FRAME
RESIDUAL
HEAT INDICATOR
4
SAFETY INSTRUCTIONS
Please comply w th these nstruct ons. If you do not, any damage
result ng from mproper, ncorrect or negl gent use or mproper
connect on or nstallat on s not covered by the warranty.
· This appliance should be used only for normal domestic use.
· This appliance must only be used for the purpose of heating or cooking
food, any other use, for example heating rooms, orking surface or storage
surface, is dangerous.
· Additions or modifications to the appliance are not permitted.
· Do not place or store flammable liquids, highly flammable materials or
fusible objects on or near the appliance.
· Small children must be kept a ay from the appliance.
· The appliance may only be installed and connected by an authorized
service personnel.
· The electrical safety of this hob is guaranteed only if it is connected to a
properly earthed system, hich complies ith the electrical safety standards.
· Built-in appliances may only be used after they have been built in to
suitable built-in units and ork surfaces that meet the standards.
· Do not put pressure on the po er supply cable hile fitting the hob.
· Po er supply cable length should not exceed 2m for isolation safety.
· In the event of faults ith the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be s itched off and
disconnected from the electrical supply to prevent the possibility of an
electric shock.
· Repairs to the appliance must only be carried out by authorized service
personnel.
· Make sure all the packaging has been removed before you use the
appliance.
· Cables from electrical appliances must not touch the hot surface of the
appliance or hot cook are.
5
. Never leave the the appliance hob unattended hen cooking ith fat or
oil. They can rapidly catch fire if overheated.
· Do not cut any food on the glass of the vitroceramic hob. Glass panels
should not be used as orking surfaces.
· Be careful hen using small household appliances, such as irons, near
the elements.
· Do not use the cooking zones ith empty cook are or ithout cook are.
· Make sure all the controls are in the off position hen not in use.
· For cleaning, the appliance must be s itched off and cooled do n.
· For safety reasons, the cleaning of the appliance ith steam jet or high-
pressure cleaning equipment is not permitted.
· Use only stable flat-based pans.
· This appliance is not intended for use by persons ( including children) ith
a lack of experience and kno ledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
· Children should be supervised to ensure that they do not play ith the
appliance.
6
INSTALLATION
The electr cal connect on of th s hob should be carr ed out by an
author zed serv ce personnel or a qual f ed electr c an, accord ng to
the nstruct ons n th s gu de and n compl ance w th the current
regulat ons.
· Prior to installation, ensure that the local distribution conditions and the
adjustment of the appliance are compatible.
· The la s, ordinances, directives and standards in force in the country of
use are to be follo ed (safety regulations, proper recycling in accordance
ith the regulations, etc.)
Locat ng your bu lt- n hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance and contact an authorized service personnel or a qualified
electrician immediately.
· This built-in hob is to be inserted into a cut out of a orktop. It ill be
electrically connected ith the s itch box belo , especially provided for
this purpose.
7
· Create an opening ith the dimensions sho n in the picture belo .
· Apply the one-sided self-adhesive sealing tape supplied all the ay round
the lo er edge of the cooking surface along the outer edge of the glass
ceramic panel. Do not stretch it.
· Scre the 4 orktop mounting brackets on the side alls of product.
520mm
590mm
47.5mm
560mm
490mm
Min.
60mm
Min.
150mm
Min.
130mm
Min.
25mm
orktop mounting bracket
8
ELECTRICAL CONNECTION OF YOUR HOB
· Before proceeding ith the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
po er rating of the hob.
· Electrical installation of the residence and the electrical current plug in
use must be earthed and conform ith safety regulations.
· If there is no dedicated hob circuit and fused s itch, they must be installed
by a qualified electrician before the hob is connected.
. Fused s itch must be easily accessible once the hob has been installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· This appliance conforms ith the requirements of the follo ing EEC
Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to
radio interference,
2. EEC/89/109 relating to contact ith foods.
· A circuit breaker ith a contact opening of at least 3mm, rated 20A and
delayed functioning type must be installed inside the supply circuit.
· For the knob controlled vitroceramic hob, the cable must be H05VV-F
5X2,5mm² for 3 phase or 3X2,5mm² for single phase / 60227 IEC 53.
You ill find the connection diagram sho n on the bottom of your appliance.
1
2
3
2
2
2
2
2
2
* Th s appl ance must be earthed.
* For th s connet on a power lead of w re type
H05VV -F should be used.
9
· During installation, please insure that isolated cables are used. An incorrect
connection might damage your appliance. The guarantee ill not cover
such damages.
· All repairs must be carried out by an authorized service personnel or a
qualified electrician.
· Unplug your appliance before each maintenance. For reconnection, follo
the connection diagrams strictly.
10
USAGE
The appliance is operated by using knob control and the heat stored is
confirmed by residual heat indicator lamp on the vitroceramic surface.
After reapplying the supply voltage to the hob control after an interruption of
the supply voltage occurred, causes that the residual heat display flashes,
if the corresponding heater had a residual heat of greater + 60 C before the
po er interruption occurred. The display ill flash until the max. residual heat
time has expired or the heater ill be selected and activated.
Knob controlled cooker is designed for
operating at 6 heat levels:
1 Keeping arm position
2-3 Heating position at lo heat
4-5-6 Cooking roasting and boiling
position
Dual and oval heaters have t o heating
zones. To activate the outer zone of a
dual/oval heater, turn the knob to
position once. In this ay both outer
zones s itches on.
To deactivate the outer zone of a
dual/oval heater, turn the knob to
position once. In this ay, both outer
zones s itches off.
Res dual Heat Funct ons
After all cooking processes there is some
heat stored in the vitroceramic glass
called residual heat. The control can
calculate roughly ho hot the glass is
in the orst case. If the calculated
temperature is higher than + 60 C, then
this ill be indicated in the related
residual heat indicator lamp. The residual
heat display is sho n as long as the
calculated heater temperature is > + 60
C.
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali SERVIS Piano cottura
